OSP Home Furnishings Adaptor 63 Inch Gaming Desk Instruction Manual

1. Introduction and Overview

Thank you for choosing the OSP Home Furnishings Adaptor 63 Inch Gaming Desk. This desk is designed to provide a robust and feature-rich platform for your gaming and home office needs. It includes an elevated monitor shelf, RGB LED lighting, a smart power hub with wireless charging and USB ports, and integrated cable management solutions.

This manual provides essential information for safe assembly, proper operation, and routine maintenance to ensure the longevity and optimal performance of your desk.

Figure 1.1: OSP Home Furnishings Adaptor 63 Inch Gaming Desk, showcasing its matte black carbon fiber surface and elevated monitor shelf.

2. Safety Information

Please read all safety warnings and instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Weight Capacity: Do not exceed the maximum weight recommendation of 100 pounds on the desk surface. Distribute weight evenly.
• Electrical Safety: Ensure all electrical connections for the power hub and LED lights are secure and conform to local electrical codes. Do not overload the power outlets. Disconnect power before cleaning or moving the desk.
• Assembly: Assemble the desk on a soft, clean surface to prevent scratches. Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten fasteners as needed.
• Placement: Place the desk on a level surface. Avoid placing the desk in direct sunlight or near heat sources to prevent material degradation.
• Children: Keep small parts and packaging materials away from children during assembly.

3. Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Gaming Desk Components (Desk surface, monitor shelf, legs, support beams)
• Hardware (Screws, bolts, washers, Allen wrench)
• Wireless Charger
• Power Outlet/USB Hub
• Remote Control with CR2025 Button Cell Battery (for RGB LED lights)
• Assembly Instructions

4. Setup and Assembly

Assembly is required for this product. It is recommended that at least one person performs the assembly. For detailed, step-by-step instructions, please refer to the included Assembly Instructions manual. A digital version of the installation manual is also available here.

General Assembly Tips:

• Lay out all parts and hardware on a clean, soft surface to prevent damage.
• Identify each component using the parts list in the assembly manual.
• Do not fully tighten all screws until the entire desk structure is loosely assembled. This allows for minor adjustments. Once all parts are in place, tighten all screws firmly.
• Ensure the desk is stable and level after assembly.

Figure 4.1: Desk dimensions: 63 inches (W) x 28 inches (D) x 36 inches (H), with the monitor shelf providing additional height.

5. Operating Instructions

5.1 RGB LED Lights

The desk features remote-controlled RGB LED lights located under the monitor shelf. Use the included remote control to power the lights on/off, change colors, adjust brightness, and select various lighting modes.

• Ensure the remote control battery (CR2025) is correctly installed.
• Point the remote control towards the LED light receiver, typically located near the light strip.

5.2 Smart Power Hub (Wireless Charging, USB Ports, Power Outlets)

The integrated power hub provides convenient access to power for your devices.

Figure 5.1: Close-up view of the integrated wireless charging pad, USB ports, and power outlets.

• Wireless Charging Pad: Place your compatible smartphone or device directly onto the wireless charging pad. Ensure the device is centered for optimal charging. A charging indicator (if present on your device) will confirm connection.
• USB Power-Ports: Connect your USB-powered devices (e.g., phone, tablet, gaming accessories) to the USB ports for charging.
• Power Outlets: Use the standard AC power outlets for laptops, monitors, or other electronic devices. Do not exceed the maximum wattage rating of the power hub.

5.3 Integrated Features

• Device Holder and Accessory Tray: Utilize the dedicated slot and tray for holding smartphones, tablets, or small accessories, keeping them organized and within reach.
• Cup Holder: The integrated cup holder helps prevent spills and keeps your beverage secure.
• Headphone Hook: Hang your headphones on the convenient hook located on the side of the desk to keep them off the surface and easily accessible.
• Cable Management System: Route your cables through the designated openings and channels to maintain a tidy and clutter-free workspace.

Figure 5.2: Overview of key features including wire management, accessory hook, carbon fiber finish, wireless charging, USB hub, and RGB LED lights.

6. Maintenance and Care

Proper care will help maintain the appearance and functionality of your gaming desk.

• Cleaning: Wipe the desk surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Carbon Fiber Surface: The matte PVC carbon fiber surface is designed for durability. Avoid sharp objects that could scratch or cut the surface.
• Electrical Components: Keep liquids away from the power hub, USB ports, and LED lights.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.

7. Troubleshooting

If you encounter issues with your Adaptor Gaming Desk, refer to the following common troubleshooting steps:

• Desk Wobbles: Ensure all assembly screws are fully tightened. Check that the desk is placed on a level surface. Adjust leg levelers if present.
• RGB LED Lights Not Working:
  • Check if the power cable for the desk is securely plugged into a working outlet.
  • Ensure the remote control battery (CR2025) is not depleted and is inserted correctly.
  • Verify that the LED light strip is properly connected to its power source.
• Wireless Charging Not Working:
  • Confirm your device is wireless charging compatible.
  • Ensure the device is centered on the charging pad.
  • Remove any thick phone cases that might interfere with charging.
  • Check if the desk's power cable is connected.
• USB Ports/Power Outlets Not Working:
  • Verify the desk is plugged into a live power outlet.
  • Check if the power hub has an on/off switch and ensure it is in the 'on' position.
  • Test with a different device to rule out device-specific issues.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact OSP Home Furnishings customer support.

8. Specifications

9. Warranty Information

OSP Home Furnishings warrants to the original purchaser that this product will be free from defects in material and workmanship for one (1) year from the date of purchase. OSP Home Furnishings will, at its option, repair or replace defective products or parts without charge to the original purchaser only.

This warranty applies only to defects in material and workmanship and does not cover damage resulting from misuse, abuse, accident, neglect, unauthorized repair or modification, or normal wear and tear.

10. Customer Support

For further assistance, missing parts, or warranty claims, please contact OSP Home Furnishings customer support. Refer to your purchase documentation or the manufacturer's official website for the most current contact information.

When contacting support, please have your model number (ADP6328GD) and proof of purchase readily available.