Honoson Motion Activated 16-Color LED Toilet Night Light User Manual (Model Honoson-Lamp-S7882)

1. Overview

The Honoson Motion Activated 16-Color LED Toilet Night Light is designed to provide convenient and colorful illumination for your toilet bowl. Featuring a motion-activated sensor, it automatically lights up in dark environments, offering a gentle glow without the need to turn on bright room lights. Its flexible arm ensures a secure fit on most toilet bowls, and the 16 color options allow for personalized ambiance.

2. Package Contents

6 x Honoson Motion Activated LED Toilet Night Lights
1 x User Manual

Note: 3 x AAA batteries are required for each unit and are NOT included in the package.

3. Setup and Installation

3.1 Battery Installation

Open the battery compartment cover on the back of the night light unit.
Insert 3 x 1.5V AAA batteries, ensuring correct polarity (+/-).
Close the battery compartment cover securely.

Diagram showing the components of the Honoson toilet night light, including the motion sensor, LED light, flexible arm, and battery compartment for 3 AAA batteries. — Figure 1: Product components and battery compartment. The flexible arm can be adjusted to fit the toilet bowl.

3.2 Attaching to the Toilet

Adjust the length and bend of the flexible arm to fit the rim of your toilet bowl. The arm is designed to be pliable for a secure fit.
Clip the night light unit onto the rim of the toilet bowl, ensuring the motion sensor faces outwards and the LED light is positioned inside the bowl.
Ensure the unit is stable and does not interfere with the toilet seat or lid.

Step-by-step instructions for installing the Honoson toilet night light: 1. Adjust arm length. 2. Insert batteries and clip to toilet rim. 3. Light works in the dark, motion activated. 4. Press button to set single color or rotate colors. — Figure 2: Visual guide for installation steps, including arm adjustment and placement on the toilet rim.

4. Operating Instructions

4.1 Motion Activation

The toilet night light is equipped with a motion-activated sensor and a light sensor.
It will only activate in dark environments to conserve battery life.
When motion is detected in the dark, the light will automatically turn on.
The light will remain on for approximately 2 minutes after the last detected movement, then automatically shut off.

Comparison image showing a toilet in daylight with the night light off, and the same toilet at night with the night light glowing purple, illustrating its motion-activated feature in the dark. — Figure 3: The night light activates automatically in the dark when motion is detected.

4.2 Color Selection

The unit features 16 different LED colors.
By default, the light will cycle through all 16 colors in a rotation mode.
To select a single color, press the small button located on the side of the unit when your desired color is displayed. The light will then remain on that static color.
To return to the color rotation mode, press the button again.

A grid displaying 16 different colors illuminating a toilet bowl, demonstrating the multi-color changing capability of the Honoson toilet night light. — Figure 4: The night light offers 16 vibrant colors to choose from or cycle through.

5. Maintenance

5.1 Cleaning

To clean the unit, wipe it with a wet wipe or a damp cloth.
Do NOT immerse the unit in water or place it directly under running water, as it is not water resistant.

5.2 Battery Replacement

When the light dims or stops functioning, it's time to replace the batteries.
Follow the battery installation steps (Section 3.1) to replace the 3 x AAA batteries.
Dispose of old batteries according to local regulations.

6. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	Insufficient darkness; dead/incorrectly installed batteries; sensor blocked.	Ensure the room is dark. Replace batteries. Check battery polarity. Ensure sensor is clear and facing outwards.
Light stays on constantly.	Constant motion detected; unit in a brightly lit area.	Relocate the unit to an area with less ambient light or less frequent motion.
Light does not change colors.	Unit is set to a single color mode.	Press the color selection button to switch back to color rotation mode.
Flexible arm is loose.	Improper adjustment or fit.	Re-adjust and bend the flexible arm to ensure a tighter and more secure fit around the toilet rim.

7. Specifications

Model Number: Honoson-Lamp-S7882
Power Source: 3 x 1.5V AAA Batteries (not included)
Material: Polyvinyl Chloride
Switch Type: Motion Sensor
Light Source Type: LED
Number of Colors: 16
Motion Sensor Range: Detects movement up to a certain distance (typical for PIR sensors)
Auto Shut-off: Approximately 2 minutes after last motion detected
Water Resistance Level: Not Water Resistant
Installation Type: Hanging (flexible arm)
Battery Life: Approximately 100 hours (depending on usage and battery quality)

8. Important Safety Information

This product is designed for indoor use only.
Do not immerse the unit in water or expose it to excessive moisture.
Keep batteries and the unit out of reach of small children to prevent choking hazards.
Always insert batteries with correct polarity.
Remove batteries if the product is not used for an extended period.
Dispose of used batteries responsibly according to local environmental guidelines.

9. Product Videos

9.1 Honoson Toilet Night Light Installation and Features

This video demonstrates the battery installation, flexible arm adjustment, and motion-activated color-changing features of the Honoson Toilet Night Light. It shows how the light illuminates the toilet bowl in various colors.

9.2 Honoson Toilet Bowl Lights - Unboxing & Review

An unboxing and review of the Honoson Toilet Bowl Lights, highlighting the product's design, ease of use, and the effect of its motion-activated illumination in a bathroom setting.

Honoson Honoson-Lamp-S7882