1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your ELEKICO Super Bright 50W 4FT V-Shape LED Shop Lights. Please read this manual thoroughly before installation and retain it for future reference.
These 4-foot LED shop lights are designed for various indoor applications, including garages, basements, workshops, storage rooms, laundry rooms, and warehouses. They offer high brightness, energy efficiency, and a long lifespan.
2. Product Features
- High Performance: 50W power consumption, 7200 Lumens output, 5000K daylight color temperature, 50,000 hours lifespan. Equivalent to 80W fluorescent lights, saving approximately 52% on electricity.
- V-Shape Design: Provides a 270-degree beam angle for wide and uniform illumination without wasted light, delivering about 40% more lumens than standard flat LED tubes.
- Easy Installation: Plug-and-play design with included snap joints for hanging and a power cord with an on/off switch. Operates on AC100-277V.
- Extendable Design: Lights can be connected in series, allowing up to 6 units to be linked using provided connectors or connector cords.
- Durable Construction: Made with aluminum and plastic for durability and efficient heat dissipation.
- Wide Application: Suitable for indoor lighting in basements, laundry rooms, storage rooms, toolsheds, garages, cellars, workshops, craft rooms, and warehouses.
3. What's in the Box
The ELEKICO 4FT-10PACK LED Shop Lights package includes the following components:
- 10 x 4FT LED Shop Lights
- Power Cords (7.87 inch)
- Connection Wires (23.62 inch)
- Power Cords with On/Off Switch (39 inch)
- Mounting Hardware (screws, wall anchors, clips)
- Seamless Connectors
- User Manual
4. Setup and Installation
The ELEKICO LED Shop Lights are designed for easy, plug-and-play installation. Follow these steps for a successful setup:
4.1 Safety Precautions
- Turn off the power before installing.
- This lamp is non-dimmable and not suitable for dimmers or remote controllers.
- Do not use in totally enclosed luminaires.
- Install this item away from radios, remote control doors, etc., which may cause electromagnetic interference (EMI).
4.2 Mounting the Lights
- Determine the desired location for your lights on the wall or ceiling.
- Secure the provided mounting clips to the surface using screws and wall anchors (if necessary). Ensure clips are spaced appropriately to support the 4-foot light bar.
- Snap the LED light fixture into the buckles of the mounted clips.
4.3 Connecting the Lights
You have several options for connecting your LED shop lights:
- Single Light Setup (Plug and Play): Connect the power cord with the on/off switch directly to one LED light fixture and plug it into a standard AC100-277V outlet.
- Linkable Design (Series Connection): Use the provided connection wires to link multiple LED light fixtures together. You can connect a maximum of 6 lights in a single series.
- Seamless Connection: For a continuous lighting effect, use the seamless connectors to directly join two light fixtures end-to-end.
- Hardwire Connection: If a permanent wired connection is desired, use the power cords with exposed wires to connect to an AC line power source (L and N) and earth line. Consult a qualified electrician if unsure.
Video: This video demonstrates the easy installation process of the ELEKICO 4FT LED Shop Lights, showing how to connect and mount them in a garage setting. It highlights the plug-and-play functionality and the brightness of the lights.
5. Operating Instructions
Once installed and connected, operating your ELEKICO LED Shop Lights is straightforward:
- If using the power cord with an on/off switch, simply press the switch to turn the lights on or off.
- For hardwired installations, operate the lights using the wall switch connected to the circuit.
- The lights provide instant-on illumination with no flickering.
6. Maintenance
These LED shop lights are designed for low maintenance. To ensure optimal performance and longevity:
- Cleaning: Periodically wipe the light fixtures with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check the connections and mounting hardware to ensure they are secure.
- Avoid Water: These lights are rated as "Not Water Resistant." Avoid direct exposure to water or high humidity environments.
7. Troubleshooting
If you encounter any issues with your ELEKICO LED Shop Lights, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power supply, loose connection, faulty switch. | Check if the power outlet is working. Ensure all connections are secure. Test the on/off switch. |
| Lights flicker. | Loose connection, incompatible dimmer (if used, though not recommended), EMI. | Check all connections. Ensure no dimmer is used. Relocate away from sources of EMI. |
| Lights are dim. | Too many lights connected in series, power supply issue. | Ensure no more than 6 lights are connected in series. Check power supply voltage. |
If the problem persists after trying these solutions, please contact ELEKICO customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | ELEKICO |
| Model Name | 4FT-10PACK |
| Wattage | 50 Watts |
| Brightness | 7200 Lumens |
| Color Temperature | 5000 Kelvin (Cool White) |
| Voltage | 110 Volts (AC) |
| Product Dimensions | 48"L x 1.26"W x 1.3"H |
| Material | Aluminum, Plastic |
| Average Life | 50,000 Hours |
| Beam Angle | 270 Degrees |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
| Certification | IP67 |
9. Warranty and Support
ELEKICO provides a 5-year warranty for these LED shop lights, covering manufacturing defects and performance issues under normal use. For warranty claims, technical support, or any inquiries, please contact ELEKICO customer service.
Return Policy: The product is eligible for a refund/replacement within 30 days of purchase.
Video: This video provides a general overview of the ELEKICO LED shop lights, highlighting their brightness and ease of installation, suitable for various applications like garages.