SilverStone Technology SX1000 Platinum Power Supply User Manual

Introduction

The SilverStone Technology SX1000 Platinum power supply is designed for high-performance small form factor PCs. It features an SFX-L form factor, a 120mm fan for optimal balance of power and quietness, and an 80 PLUS Platinum efficiency rating. This manual provides essential information for the proper installation, operation, and maintenance of your power supply.

Safety Information

Please read and understand all safety instructions before installing or operating this power supply. Failure to do so may result in personal injury or damage to the product.

• Ensure the power supply is disconnected from the AC outlet before installation or maintenance.
• Do not open the power supply casing. High voltages are present inside, and there are no user-serviceable parts. Opening the unit will void the warranty.
• Install the power supply in a well-ventilated area, away from heat sources, direct sunlight, and moisture.
• Use only the modular cables provided with this power supply. Using incompatible cables may cause damage to the PSU or connected components.
• Ensure all cables are securely connected before powering on the system.
• This power supply is designed for use in personal computer systems. Do not use it for other applications.

Package Contents

Verify that all items are present in your package:

• SilverStone SX1000 Platinum SFX-L Power Supply
• Modular Cable Set (including ATX 24-pin, CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral 4-pin connectors)
• AC Power Cord
• Mounting Screws
• User Manual (this document)
• ATX adapter bracket (for ATX case compatibility, if included)

Image: The SilverStone SX1000 Platinum power supply shown alongside its retail packaging, highlighting the product and its branding.

Product Overview

The SX1000 Platinum is a fully modular power supply designed for compact systems. Its SFX-L form factor allows for a larger 120mm fan, contributing to quieter operation and efficient cooling.

Image: An angled view of the SX1000 Platinum power supply, showcasing its compact SFX-L design and the 120mm fan grill.

Image: A top-down perspective of the power supply, emphasizing the large 120mm fan for superior cooling and quiet operation.

Image: Close-up of the fully modular cable connection ports, allowing for clean cable management and only using necessary cables.

Image: Side view of the power supply, featuring the SilverStone SX1000 Platinum branding and 80 PLUS Platinum certification logo.

Image: Rear panel of the power supply, showing the AC input, power switch, and ventilation grille.

Setup and Installation

Follow these steps to properly install your SilverStone SX1000 Platinum power supply into your PC system.

1. Prepare Your System: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your PC case to access the power supply mounting area.
2. Mount the Power Supply:
   • If installing in an SFX-L compatible case, slide the power supply into the designated bay and secure it with the provided screws.
   • If installing in an ATX case, attach the included ATX adapter bracket (if applicable) to the power supply first, then mount it into the ATX power supply bay.
3. Connect Essential Cables:
   • Connect the 24-pin ATX cable to your motherboard.
   • Connect the 4+4-pin CPU (EPS) cable(s) to your motherboard's CPU power connector(s).
   • Connect the 6+2-pin PCIe cables to your graphics card(s) as required.
   • Connect SATA power cables to your SSDs/HDDs and Peripheral (Molex) cables to any other components requiring them.
   

   Image: A detailed diagram illustrating the various types of modular cables included with the SX1000 Platinum, their connector quantities, and lengths for proper system integration.

4. Cable Management: Route cables neatly to ensure proper airflow within the case. Utilize cable ties or straps if necessary.
5. Close Case and Connect Power: Once all connections are secure, close your PC case. Connect the AC power cord to the power supply and then to a wall outlet.
6. Power On: Flip the power switch on the back of the power supply to the "On" position. You can now power on your computer.

Operating Instructions

The SilverStone SX1000 Platinum power supply is designed for continuous operation once properly installed. It features a semi-fanless mode for silent operation under low load conditions.

• Semi-Fanless Operation: The 120mm fan will not spin at idle or low load conditions to minimize noise. It will automatically activate when the power supply reaches a certain temperature or load threshold to ensure optimal cooling.
• Power On/Off: Use the main power switch on the rear of the power supply to completely cut power to the unit. For daily use, power your system on and off via the operating system or case power button.
• Continuous Power Output: This unit provides 1000W continuous power output, rated for 24/7 operation at 50℃ operating temperature, ensuring stable power delivery for demanding systems.

Maintenance

Proper maintenance helps ensure the longevity and optimal performance of your power supply.

• Dust Removal: Periodically clean dust from the power supply's fan grille and ventilation openings using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Cable Inspection: Occasionally check all modular cable connections to ensure they are secure and free from damage.
• Environmental Conditions: Maintain a stable operating environment for your PC, avoiding extreme temperatures and high humidity.
• No User Serviceable Parts: Do not attempt to disassemble the power supply. Any internal servicing should only be performed by authorized personnel.

Troubleshooting

If you encounter issues with your power supply, refer to the following common problems and solutions:

For more detailed troubleshooting or persistent issues, please refer to the official SilverStone support resources or contact their customer service.

Specifications

Warranty and Support

SilverStone Technology provides a limited warranty for its products. Please retain your proof of purchase for warranty claims.

• Warranty Period: Refer to the official SilverStone Technology website or your product packaging for specific warranty duration.
• Technical Support: For technical assistance, troubleshooting beyond this manual, or warranty service, please visit the official SilverStone Technology website or contact their customer support team.
• Online Resources: Additional resources, including updated drivers, FAQs, and detailed product information, may be available on the SilverStone Technology website.

For the most up-to-date information regarding warranty terms and support contacts, please visit: www.silverstonetek.com