1. Introduction
The WAVLINK AX1800 Outdoor WiFi Extender is designed to provide robust and extended wireless coverage in outdoor environments. Compliant with IEEE 802.11ax/ac/a/b/g/n standards, this dual-band device offers high-speed internet access, making it ideal for large outdoor areas such as farms, yards, RV parks, and campsites. Its durable, waterproof design ensures reliable performance in various weather conditions.
Image 1.1: The WAVLINK AX1800 Outdoor WiFi Extender, showcasing its compact design and external antennas.
2. Key Features
- AX1800 Dual-Band WiFi 6: Supports speeds up to 1201Mbps on 5GHz and 574Mbps on 2.4GHz, reducing interference and congestion for fast internet.
- Outdoor Durability: Equipped with IP67 waterproof enclosure, 15kV ESD protection, and 6kV lightning protection for reliable operation in harsh weather.
- High Power & Long Range: Features 4x8dBi fiberglass tube high-gain omnidirectional antennas and built-in high-power amplifiers for extensive WiFi coverage and penetration.
- Multiple Operating Modes: Supports Mesh, AP, Router, Repeater, and AP+Repeater modes to suit various outdoor networking requirements.
- Flexible Power Supply: Supports 802.3AF/AT active PoE and passive PoE, allowing data and power transfer over a single Ethernet cable for flexible outdoor installation.
Image 2.1: The extender's IP67 waterproof design and robust build ensure performance in various outdoor conditions.
Image 2.2: Illustration of the AX1800's dual-band WiFi 6 capabilities, providing high-speed connectivity.
3. What's in the Box
Verify that all items are present in your package:
- 1 x Wi-Fi6 Outdoor Mesh Router/AP/Repeater
- 4 x Omni Antennas
- 4 x Cable Ties
- 1 x Ethernet Cable Connectors
- 1 x Quick Installation Guide
- 1 x Wrench
- 2 x Silicone Pads
- Several Screws
- Passive PoE (Optional): 1 x 54V Power Adapter, 1 x PoE Converter, 1 x Ethernet Cable
Image 3.1: All components included in the WAVLINK AX1800 Outdoor WiFi Extender package.
4. Setup Guide
4.1 Installation and Placement
Proper installation and placement are crucial for optimal performance. Consider the following guidelines:
- Line of Sight: Position the WAVLINK AP with a clear line of sight to cover your desired outdoor area. Minimize obstructions such as walls, trees, and buildings.
- Central Location: Place the AP at the center of your intended outdoor coverage area to ensure even signal distribution.
- Height: Mounting the AP at a higher elevation (e.g., on a pole, under an eave, or on a wall) typically improves coverage and reduces interference from ground-level obstacles.
- Ethernet Cable Range: Ensure the location is reachable by the Ethernet cable from your router. CAT5E or above cables generally support up to 100 meters.
4.2 Power Supply (PoE)
The WAVLINK outdoor AP supports PoE (802.3at/af). If your router lacks a PoE port, a PoE adapter may be required to power the AP via the Ethernet cable. PoE simplifies wiring by combining data and power transmission into a single cable. When using PoE, confirm voltage and power requirements for both the WAVLINK AP and PoE injector (Active PoE: 48V; Passive PoE: 54V).
Image 4.1: PoE connection diagram, illustrating how power and data are supplied via a single Ethernet cable.
4.3 Starlink Integration Guide
For Starlink users, the standard Gen 2 router lacks an Ethernet port. An additional Starlink Ethernet adapter is required to connect the WAVLINK outdoor AP to the Starlink router when operating in Access Point (AP) mode.
Image 4.2: Connection diagram for integrating the WAVLINK AP with a Starlink router.
Image 4.3: Illustration of a wireless mesh setup with multiple WAVLINK APs extending coverage from a Starlink router.
5. Operating Modes
The WAVLINK AX1800 supports various operating modes to adapt to different network setups and requirements:
- Mesh Mode: Creates a seamless mesh network with other compatible devices for extended coverage and seamless roaming.
- AP (Access Point) Mode: Converts a wired network connection into a wireless one, acting as a central hub for wireless devices.
- Router Mode: Functions as a primary router, managing network traffic and providing internet access.
- Repeater Mode: Extends the range of an existing wireless network by repeating its signal.
- AP+Repeater Mode: Combines Access Point functionality with signal repeating for broader coverage.
Image 5.1: Overview of Mesh Technology support, showing how the extender integrates into a mesh network.
Image 5.2: Visual representation of the various flexible operating modes available for the device.
6. Specifications
| Attribute | Value |
|---|---|
| Product Dimensions | 3.46 x 12.99 x 17.64 inches |
| Item Weight | 4.97 pounds |
| Wireless Communication Standard | 802.11ac, 802.11ax |
| Data Transfer Rate | 1800 Megabits Per Second |
| Frequency Band Class | Dual-Band |
| Special Features | Fiberglass tube high-gain antennas, IP67 waterproof enclosure, Mesh Seamless WiFi Roaming, Optional PoE Power Supply, Outdoor wifi extender long range |
7. Troubleshooting
Common questions and solutions for the WN573HX1 model:
7.1 How to make the WiFi signal reach 3km?
If you want the WiFi signal to reach 3km, please try to use two devices to work together. You could configure the 1st Wavlink device as AP mode and configure the 2nd Wavlink device as repeater mode to repeat the WiFi signal of the 1st Wavlink device.
7.2 Why the WiFi signal could not reach the advertised distance?
- Please make sure there is no obstacle between the Wavlink device and the target area. If there is an obstacle between them, the performance will be limited.
- Please do not install the Wavlink device too high for better performance; it is better to install the Wavlink device 2-3m higher than the ground.
- There should be four antennas; two of them should be the 2.4G antennas and two of them should be the 5G antennas. Please make sure you install the antennas at the corresponding connectors.
7.3 Why the Wavlink device could not repeat the WiFi signal of the existing WiFi signal?
- Our device does not support the WiFi signal with the Captive Portal. If you connect the WiFi signal by your phone, you will enter a web page and enter or confirm some information. This means the WiFi signal should come with the Captive Portal.
- When you try to repeat the existing WiFi signal, please make sure you enter the correct WiFi password of the existing WiFi signal.
- To repeat the 5G signal of the host router, there should be less Wireless Interference on the 5G signal.
- Please make sure the MAC filter of the host router should be disabled and the DHCP should be enabled.
Image 7.1: Detailed troubleshooting steps for common issues with the WAVLINK AX1800 extender.
8. Warranty and Support
All WAVLINK products include a 30-day free return and refund service, and a 12-month warranty.
For technical support, please contact WAVLINK:
- Phone Support: +18889730883 (UTC-5) Mon - Fri 9AM - 6PM
- Email Support: Contact@wavlink.com
WAVLINK aims to provide solutions within 8 hours and offers life-long technical support.