Midea Cube 35 Pint Dehumidifier

1. Introduction

The Midea Cube 35 Pint Dehumidifier is designed to efficiently remove moisture from your home, creating a more comfortable environment. Its unique lift-and-twist design offers flexibility in operation and storage, while smart controls provide convenient management of humidity levels. This manual provides essential information for the safe and effective use of your dehumidifier.

Figure 1: Midea Cube Dehumidifier in operation, demonstrating multi-directional air flow.

2. Product Features

• Lift-and-Twist Design: Offers unparalleled flexibility, allowing the unit to operate in extended or nested form for compact storage.
• Large Water Tank Capacity: Features a 4.2-gallon (15.9L) removable bucket, providing up to 3 times more capacity than traditional dehumidifiers, reducing the frequency of emptying.
• Continuous Drain Option: Includes a drain hose for continuous moisture removal without needing to empty the bucket.
• Smart Control: Wi-Fi enabled for remote control via the Midea SmartHome app (iOS/Android) and voice commands through Alexa or Google Assistant.
• Auto Restart: Automatically resumes operation with previous settings after a power outage.
• Auto-Defrost: Prevents collected water from freezing, protecting the machine.
• Washable Filter: Maintains air quality and is easy to clean, eliminating the need for expensive replacements.

Figure 2: The dehumidifier's large 4.2-gallon water tank capacity.

3. Package Contents

Ensure all items are present upon unpacking:

• Midea Cube 35 Pint Dehumidifier Unit
• Water Bucket (integrated)
• Drain Hose
• User Manual (this document)

4. Setup

4.1 Unpacking

Carefully remove the dehumidifier and all packaging materials from the box. Inspect the unit for any damage during transit. Keep packaging for future storage or transport.

4.2 Attaching Wheels

The dehumidifier comes with optional wheels for easy mobility. To attach, carefully tilt the unit and insert each wheel into the designated slots on the bottom of the water bucket until they click securely into place. Ensure all four wheels are firmly attached before placing the unit upright.

4.3 Positioning the Dehumidifier

Place the dehumidifier on a level, stable surface. Ensure there is at least 8 inches (20 cm) of space around the unit for proper air circulation. Avoid placing it near heat sources, in direct sunlight, or in areas where it could be exposed to splashing water.

4.4 Power Connection

Plug the power cord into a grounded electrical outlet. The unit is now ready for operation.

Figure 3: The dehumidifier's flexible extended and nested forms.

5. Operating Instructions

5.1 Control Panel Overview

The control panel is located on the top of the unit and features several buttons and a digital display:

• Power Button: Turns the unit ON/OFF. Press and hold for 3 seconds to connect to Wi-Fi.
• Up/Down Arrows: Adjust humidity levels or timer settings.
• Fan Button: Selects fan speed (Low/High). Press and hold for 3 seconds to reset the filter indicator.
• Mode Button: Cycles through operation modes (Set, Continuous, Max).
• Fill Level Button: Sets the desired water fill level (1-4) for the bucket.
• Timer Button: Sets the 24-hour ON/OFF timer.
• Digital Display: Shows current humidity, target humidity, or timer settings.

Figure 4: Midea Cube Dehumidifier Control Panel.

5.2 Setting Desired Humidity

Press the 'Mode' button until 'Set' mode is active. Use the Up/Down arrows to select your desired humidity level (e.g., 35% to 85%). The unit will operate until the room humidity reaches the set level, then cycle ON/OFF to maintain it.

5.3 Fan Speed Adjustment

Press the 'Fan' button to toggle between Low and High fan speeds.

5.4 Operation Modes

• Set Mode: Maintains a user-defined humidity level.
• Continuous Mode: Runs continuously regardless of humidity level.
• Max Mode: Operates at the highest fan speed continuously for maximum moisture removal.

5.5 Timer Function

Press the 'Timer' button and use the Up/Down arrows to set a desired ON/OFF time (up to 24 hours). The unit will automatically turn ON or OFF after the set time has elapsed.

5.6 Smart App and Voice Control

The Midea Cube is Wi-Fi enabled for smart control. Download the Midea SmartHome app on your iOS or Android device. Follow the in-app instructions to connect your dehumidifier. Once connected, you can monitor humidity levels, adjust settings, receive full-water alerts, and integrate with Alexa or Google Assistant for voice control.

Figure 5: App and voice control functionality.

6. Water Drainage

6.1 Manual Bucket Drainage

When the water bucket is full, the unit will automatically stop operating and send a notification via the SmartHome app. To empty:

1. Lift the top unit from the water bucket using the integrated handle.
2. Carefully carry the water bucket to a sink or drain.
3. Pour out the collected water.
4. Return the empty bucket and top unit to their original position.

You can also use the 'Fill Level' button on the control panel to set a lower fill level (1-4) if you prefer to empty the bucket more frequently when it's less heavy.

Figure 6: Emptying the water tank.

6.2 Continuous Drainage

For continuous operation without manual emptying, use the included drain hose:

1. Remove the water bucket from the unit.
2. Connect one end of the drain hose to the drainage port on the back of the unit.
3. Route the other end of the hose to a suitable floor drain or sink, ensuring a continuous downward slope for gravity drainage.
4. Place the unit above the sink or drain, or position it over a floor drain.

Figure 7: Connecting the drain hose for continuous drainage.

7. Maintenance

7.1 Cleaning the Air Filter

The dehumidifier features a washable filter to maintain optimal performance and air quality. Clean the filter regularly (approximately every 250 hours of operation or when the filter indicator light illuminates):

1. Unplug the unit from the power outlet.
2. Remove the air filter from the back of the unit.
3. Wash the filter with warm, soapy water. Rinse thoroughly.
4. Allow the filter to air dry completely before reinserting.
5. Press and hold the 'Fan' button for 3 seconds to reset the filter indicator.

7.2 Cleaning the Unit

To keep your dehumidifier looking new and functioning properly:

• Always unplug the unit before cleaning to prevent electric shock.
• Wipe the exterior with a soft, damp cloth.
• Clean the water bucket regularly to prevent mold or mildew growth.

7.3 Storage

When not in use for extended periods, empty the water bucket, clean the filter, and store the unit in its nested form for compact storage. Ensure the unit is dry before storing.

Figure 8: Lift-and-twist design for easy access and storage.

8. Troubleshooting

If your dehumidifier is not operating as expected, consult the following common issues:

• Unit does not turn ON: Check if the power cord is securely plugged into a grounded outlet. Ensure the water bucket is correctly seated and not full.
• Dehumidifier is not collecting water: Verify that the ambient temperature and humidity are within the operating range (e.g., above 41°F/5°C and 30% relative humidity). Ensure the air filter is clean and not blocked.
• Unit is noisy: Check for any obstructions in the fan or air intake/outlet. Ensure the unit is on a level surface.
• Water bucket is full but unit continues to run: This model is designed to stop when the bucket is full. If it continues, ensure the float switch in the bucket is not obstructed.
• App connectivity issues: Ensure your Wi-Fi network is active and the dehumidifier is within range. Follow the app's troubleshooting steps for re-pairing.

9. Specifications

10. Warranty and Support

10.1 Warranty Information

The Midea Cube 35 Pint Dehumidifier comes with a 1 Year Parts & Labor Warranty. Please retain your proof of purchase for warranty claims.

10.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Midea Customer Support. Refer to the contact information provided on the Midea website or your product registration materials.