Lucande Hayley LED Pendant Light User Manual

1. Introduction

The Lucande Hayley LED pendant light is an exclusive lighting element designed to illuminate your living spaces with a special radiance. This modern LED luminaire allows for energy-saving and energy-efficient illumination of your home (e.g., living room, dining room, bedroom, kitchen, hallway) or office with pleasant light. It features decorative glass spheres and metal accents with a glossy finish, making it an ideal choice for dining area lighting.

Figure 1: Overall view of the Lucande Hayley LED Pendant Light.

Figure 2: The Hayley pendant light illuminating a dining area.

2. Safety Information

General Safety Instructions

• Always disconnect the power supply at the main circuit breaker before installation, maintenance, or cleaning.
• Installation should only be performed by a qualified electrician in accordance with local electrical codes and regulations.
• Ensure the product is securely mounted to the ceiling to prevent falling.
• Do not modify the product in any way. Any modifications may void the warranty and pose a safety risk.
• This product is designed for indoor use only (IP20 protection class). Do not expose to water or high humidity.
• This product contains a light source of energy efficiency class E.

Important Notes

This product is an ambient product. Ambient products are luminaires that can be disassembled for separate verification of the contained light source(s). The light sources are integrated LEDs and are not user-replaceable.

3. Package Contents

The Lucande Hayley LED Pendant Light package includes the following components:

• 1 x Lucande Hayley LED Pendant Light fixture (with integrated LED light sources)
• Mounting hardware (screws, anchors, etc. - typically included for ceiling installation)

4. Installation Guide

Before You Begin

1. Ensure the power supply to the installation area is switched off at the main circuit breaker.
2. Unpack all components and check for any damage. Do not install if any parts are damaged.
3. Gather necessary tools (e.g., screwdriver, drill, wire strippers, ladder).

Mounting the Fixture

1. Mark the drilling points on the ceiling for the mounting bracket.
2. Drill holes and insert appropriate wall anchors if necessary.
3. Securely attach the ceiling canopy to the ceiling using the provided mounting hardware.
4. Connect the electrical wires from the ceiling to the fixture's terminal block. Ensure correct polarity (Live, Neutral, Earth) according to local wiring standards.
5. Carefully adjust the length of the pendant cables for each glass sphere to achieve the desired arrangement. The maximum length is 1500mm.
6. Ensure all connections are secure and the fixture is firmly attached before restoring power.

Figure 3: Internal view of the ceiling mount showing wiring connections.

Figure 4: Product dimensions (Diameter: 400mm, Max Height: 1500mm, Sphere Diameter: 90mm).

5. Operation

Once installed and connected to the power supply, the Lucande Hayley LED Pendant Light can be operated via a standard wall switch. There is no integrated switch on the fixture itself. Simply toggle your wall switch to turn the light on or off.

The light sources are integrated LEDs and do not require replacement. They are designed for long-lasting performance.

6. Care and Maintenance

To ensure the longevity and appearance of your Lucande Hayley LED Pendant Light, follow these care instructions:

• Always ensure the power is off at the main circuit breaker before cleaning the light fixture.
• Wipe the metal and glass surfaces with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Avoid direct contact with water on electrical components.

7. Troubleshooting

Light does not turn on:

• Check if the power supply to the fixture is connected and switched on at the main circuit breaker.
• Verify that the wall switch controlling the light is in the "ON" position.
• Ensure all electrical connections within the ceiling canopy are secure.
• If the issue persists after checking these points, consult a qualified electrician.

Light flickers:

• Check for any loose electrical connections.
• Ensure the voltage supply to your home is stable.
• If flickering continues, contact customer support or a qualified electrician.

8. Technical Specifications

Figure 5: Energy efficiency label (Class E). For more details, visit eprel.ec.europa.eu/qr/744688.

Figure 6: Product data sheet (may contain additional technical details).

9. Recycling and Disposal

This product contains electronic components and should not be disposed of with regular household waste. Please adhere to local regulations for the disposal of electrical and electronic equipment.

• Dispose of the product at designated collection points for electrical and electronic waste.
• For specific information on recycling lamps, refer to your local waste management authority's guidelines.
• In case of broken or damaged lamps, follow specific disposal guidelines to ensure safe handling.

10. Warranty Information

For detailed warranty information regarding your Lucande Hayley LED Pendant Light, please refer to the terms and conditions provided at the point of purchase or contact Lucande customer service directly. Keep your proof of purchase for warranty claims.

11. Customer Support

For technical support, product inquiries, or assistance with installation, please visit the official Lucande website or contact their customer support. You can find more information about Lucande products and services at their brand store:

Visit the Lucande Brand Store