1. Introduction and Safety Information
Thank you for choosing the BEAR YSH-A15W6 Electric Health Multi-Function Kettle. This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your new appliance. Please read this manual thoroughly before first use and retain it for future reference.
Important Safety Precautions
- Always ensure the kettle is placed on a stable, flat, heat-resistant surface away from the edge of the countertop.
- Do not immerse the kettle base, power cord, or plug in water or any other liquid.
- Keep the appliance out of reach of children and supervise children when near the kettle.
- Do not operate the kettle if the power cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way.
- Use only the provided power base with this kettle.
- Avoid touching hot surfaces. Use handles or knobs. Steam emitted during boiling can cause burns.
- Do not fill the kettle above the maximum fill line or below the minimum fill line.
- Unplug the kettle from the outlet when not in use and before cleaning.
- This appliance is intended for household use only.
2. Product Overview
The BEAR YSH-A15W6 is a versatile electric health kettle designed for various preparations, from boiling water to brewing teas and preparing health-focused recipes. It features a durable borosilicate glass pitcher and a food-grade stainless steel strainer.
Image of the BEAR YSH-A15W6 Electric Health Multi-Function Kettle, showing the glass pitcher, stainless steel strainer, control dial, and base.
Key Features:
- 1.5 Liter BPA-free Thicken High Borosilicate Pitcher
- Food-grade SUS304 Stainless Steel Strainer
- 20 Preset Functions for diverse cooking needs
- 360° Controlling Dial for easy program selection
- 8-level Heating System for precise temperature control
- Detachable Heating Base for convenience
- 9.5-hour Programmable Delay Working Timer
- 10 Minutes Pitcher Detaching Memory
Image illustrating the dimensions of the BEAR YSH-A15W6 Electric Health Multi-Function Kettle, showing a height of approximately 25 cm (10 inches).
3. Setup
- Unpacking: Carefully remove all packaging materials and inspect the kettle for any damage. Retain packaging for future transport if needed.
- Initial Cleaning: Before first use, fill the kettle with clean water to the maximum fill line. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues. Wipe the exterior with a damp cloth.
- Placement: Place the detachable heating base on a dry, stable, and level surface. Ensure the power cord is not dangling or in contact with hot surfaces.
- Power Connection: Plug the power cord into a suitable electrical outlet (220-240V, 50/60Hz).
4. Operating Instructions
Basic Operation:
- Fill the Kettle: Open the lid and fill the borosilicate pitcher with the desired amount of water or ingredients. Ensure the water level is between the MIN and MAX marks. If using the strainer for tea or other infusions, place ingredients inside the strainer before closing the lid.
- Place on Base: Carefully place the kettle onto the detachable heating base.
- Power On: The kettle will typically power on automatically when placed on the base and plugged in, or by pressing the main power button if available.
- Select Function: Use the 360° controlling dial to navigate through the 20 preset functions. Each function is optimized for specific preparations (e.g., various teas, soups, stews, baby food, yogurt). The selected function will be displayed on the control panel.
- Adjust Settings (if applicable): For some functions, you may be able to adjust the heating level (8 levels available) or duration using the dial or dedicated buttons.
- Start: Press the 'Start' or 'Confirm' button (usually the center of the dial) to begin the selected program.
- Completion: The kettle will typically beep and/or display a completion message when the program finishes. It may automatically switch to a 'keep warm' function depending on the program.
Using the Delay Timer:
The 9.5-hour programmable delay timer allows you to set the kettle to start a program at a later time.
- Fill the kettle and select your desired function as described above.
- Before pressing 'Start', activate the 'Delay' or 'Timer' function (refer to specific button on your control panel).
- Use the dial to set the desired delay time, up to 9.5 hours.
- Confirm the delay setting. The kettle will then enter standby mode and begin the program after the set delay time has elapsed.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your kettle.
Daily Cleaning:
- Exterior: Wipe the exterior of the kettle and the heating base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Interior: After each use, rinse the interior of the glass pitcher with warm water. For stubborn residues, use a soft sponge and mild dish soap. Rinse thoroughly.
- Strainer: Remove the stainless steel strainer and rinse it under running water. Use a small brush if necessary to clean mesh openings.
- Ensure all parts are completely dry before storing or next use.
Descaling:
Mineral deposits (limescale) can build up over time, especially in hard water areas. Descale your kettle regularly (monthly or as needed) to maintain efficiency.
- Fill the kettle with a mixture of white vinegar and water (1:2 ratio) or a commercial descaling solution according to product instructions.
- Boil the mixture. For heavy scale, let it soak for 30 minutes to an hour, or as recommended by the descaling solution.
- Discard the solution and rinse the kettle interior thoroughly several times with fresh water to remove any vinegar smell or descaler residue.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not turn on. | No power supply; Kettle not properly seated on base. | Check if the power plug is securely inserted. Ensure the kettle is correctly placed on the heating base. |
| Water not heating. | Program not started; Heating element malfunction. | Ensure a program has been selected and started. If the issue persists, contact customer support. |
| Unusual spots or discoloration on the heating plate. | Mineral deposits (limescale) from water. | Perform descaling as described in the Maintenance section. These are typically mineral deposits and not rust, and can be removed with proper descaling. |
| Kettle switches off too quickly. | Overfilling; Limescale buildup. | Do not fill above the MAX line. Descale the kettle if limescale is present. |
If you encounter any issues not listed here or if the problem persists after attempting the solutions, please contact customer support for assistance.
7. Specifications
| Brand | Bear |
| Model | YSH-A15W6 |
| Capacity | 1.5 Liters |
| Material | Borosilicate Glass, SUS304 Stainless Steel |
| Voltage | 220-240V |
| Wattage | 800-952W |
| Special Features | Temperature Control, 20 Preset Functions, Delay Timer |
| Dimensions (approx.) | 28L x 18W x 15H centimetres |
8. Warranty and Support
For warranty information, product support, or service inquiries, please refer to the warranty card included with your purchase or contact the authorized Bear distributor or customer service in your region. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official Bear website or contact their customer support channels.
