Generic 2.4GHz Wireless USB PowerPoint Presentation Presenter Remote Control Laser Pointer Pen GC863 User Manual

1. Introduction

This manual provides detailed instructions for the Generic 2.4GHz Wireless USB Presentation Remote Control, Model GC863. This device is designed to enhance your presentations by offering convenient remote control of slides and a built-in laser pointer. It operates on a 2.4GHz wireless frequency, ensuring a stable connection up to 15 meters.

2. Package Contents

1 x 2.4GHz Wireless USB Presentation Remote Control (Model GC863)
1 x USB Receiver
User Manual

Note: 1 x AAA battery is required and not included in the package.

3. Product Overview

The Generic GC863 presentation remote features an ergonomic design for comfortable handling and intuitive button placement for ease of use during presentations.

Image: Front view of the Generic 2.4GHz Wireless USB Presentation Remote Control GC863, showing the main buttons including the laser pointer activation, page up/down, and screen blank/full screen controls.

Button Functions:

Laser Pointer Button: Activates the red laser pointer.
Page Up Button: Moves to the previous slide in a presentation.
Page Down Button: Moves to the next slide in a presentation.
Screen Blank/Full Screen Button: Toggles between a blank screen and the full presentation display.
Escape/Play Button: Exits presentation mode or starts the presentation.

4. Setup

4.1 Battery Installation

Locate the battery compartment cover on the back of the remote control.
Slide the cover open.
Insert one AAA battery, ensuring correct polarity (+/-).
Close the battery compartment cover securely.

4.2 USB Receiver Connection

Remove the USB receiver from its storage slot, usually located within the remote's battery compartment or at the bottom.
Plug the USB receiver into an available USB port on your computer.
Your computer should automatically detect and install the necessary drivers. This is a plug-and-play device, requiring no manual driver installation.

The remote is now ready for use. No additional software is required.

5. Operating Instructions

5.1 Presentation Control

To start a presentation, press the 'Escape/Play' button.
To advance to the next slide, press the 'Page Down' button.
To go back to the previous slide, press the 'Page Up' button.
To black out the screen or return to the presentation, press the 'Screen Blank/Full Screen' button.
To exit the presentation, press the 'Escape/Play' button again.

5.2 Laser Pointer Usage

Press and hold the 'Laser Pointer' button to activate the red laser beam. Release the button to turn off the laser. Use the laser to highlight specific points on your presentation screen.

The remote offers a wireless control range of up to 15 meters (approximately 50 feet), allowing freedom of movement during your presentation.

System Compatibility: This device is compatible with Windows 2000, Windows XP, and Windows Vista operating systems.

6. Maintenance

Battery Replacement: Replace the AAA battery when the remote's performance diminishes or it stops responding.
Cleaning: Use a soft, dry cloth to clean the surface of the remote. Avoid using liquid cleaners or abrasive materials.
Storage: When not in use, store the USB receiver inside the remote's designated slot to prevent loss. Keep the remote in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem	Solution
Remote is unresponsive.	Check if the battery is inserted correctly and has sufficient charge. Replace if necessary. Ensure the USB receiver is securely plugged into the computer's USB port. Try plugging the USB receiver into a different USB port.
Laser pointer does not work.	Verify the battery is functional. Ensure you are pressing and holding the laser button.
Limited range or intermittent connection.	Ensure there are no major obstructions between the remote and the USB receiver. Avoid strong electromagnetic interference. Replace the battery.

8. Specifications

Feature	Detail
Transmitting Frequency	2.4GHz
Control Distance	Up to 15 meters
Laser Emissive Power	Below 0.5mW
Power Supply	1 x AAA Battery (not included)
Dimensions	106 x 38 x 26 mm
Unit Net Weight	28g
System Compatibility	Windows 2000/XP/Vista
Certifications	FC, CE, RoHS, Complies with IDA standards DA103073

9. Safety Information

Laser Safety: Do not stare directly into the laser beam. Do not point the laser at people or animals. Avoid pointing the laser at highly reflective surfaces.
Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Remove batteries if the device is not used for an extended period.
Keep the device away from water and other liquids.
Do not attempt to disassemble or modify the device.

10. Warranty and Support

For warranty information and technical support, please refer to the retailer or manufacturer's official website where the product was purchased. Keep your purchase receipt as proof of purchase.