Introduction
This manual provides detailed instructions for using Hiipoo 120g 8.5x11 inch sublimation paper. Designed for high transfer rates and instant drying, this paper is compatible with sublimation inks and various inkjet printers, including E, Sawgrass, and Ricoh models. Follow these guidelines to achieve vibrant and precise transfers on a range of sublimation blanks.
1. Setup and Preparation
1.1 Unpacking and Inspection
Upon receiving your Hiipoo Sublimation Paper, inspect the package for any signs of damage. The package contains 110 sheets of 120g 8.5x11 inch sublimation paper.
Image: Comparison of original and upgraded Hiipoo sublimation paper packaging. Both versions contain authentic Hiipoo products.
1.2 Printer Compatibility
Hiipoo sublimation paper is designed to work with inkjet printers that use sublimation ink, such as E, Sawgrass, and Ricoh printers. Ensure your printer is set up for sublimation printing.
1.3 Loading the Paper
Load the sublimation paper into your printer tray. The white side is the printing side, and the pink side is the back side. Ensure the paper is loaded correctly to print on the white, coated surface.
Image: An inkjet printer loading Hiipoo sublimation paper, illustrating the correct printing side (white) and back side (pink).
1.4 Printer Settings
Before printing, adjust your printer settings:
- Set the print quality to the highest available setting.
- Ensure the "Mirror Image" or "Flip Horizontal" setting is enabled. This is crucial for correct transfer orientation.
- Select the appropriate paper type, such as "Premium Presentation Paper Matte" or a similar setting for heavy, coated paper.
2. Operating Instructions: Sublimation Transfer Process
Follow these steps for a successful sublimation transfer:
- Design and Print: Create your design and print it onto the white side of the Hiipoo sublimation paper using sublimation ink. Remember to enable the "Mirror Image" setting in your printer software.
- Prepare the Blank: Ensure your sublimation blank (e.g., mug, t-shirt, phone case) is clean and free of dust or lint. For fabric items, pre-press to remove moisture and wrinkles.
- Position the Design: Place the printed sublimation paper onto your blank with the printed side facing the blank. Secure it with heat-resistant tape if necessary to prevent shifting.
- Heat Press Application: Place the prepared blank and paper into your heat press machine. Adjust the temperature, time, and pressure according to the specific blank material. Refer to the suggested transfer settings below.
- Remove and Reveal: Once the heat press cycle is complete, carefully remove the blank and peel off the sublimation paper. The design should now be permanently transferred to your blank.
Image: Visual guide illustrating the five-step process for creating a sublimation t-shirt.
2.1 Suggested Transfer Settings
The following table provides general guidelines for heat press settings. Optimal settings may vary based on your specific equipment and blank materials. Always perform a test transfer if unsure.
| Substrates | Temperature | Time | Pressure |
|---|---|---|---|
| Textile Applications | 356°F-374°F | 25-30 sec | Heavy |
| Ceramic Mug | 356°F-374°F | 170-190 sec | Medium |
| Mouse Pad | 374°F | 30 sec | Heavy |
| Key Chain | 347-365°F | 15-25 sec | Heavy |
| Wood | 400°F | 50-60 sec | Medium |
2.2 Applicable Blanks
Hiipoo sublimation paper is suitable for transferring designs onto various light-colored sublimation blanks, including:
- Fabrics with ≤ 30% cotton or polyester content (e.g., t-shirts, pillow cases, canvas bags)
- Ceramic items (e.g., mugs, plates)
- Metal items (e.g., tumblers, keychains)
- Other coated sublimation blanks (e.g., phone cases, puzzles, mouse pads)
Image: Various items demonstrating the wide application of Hiipoo sublimation paper, such as a mouse pad, tote bag, phone case, flip-flops, and a decorative pillow.
Image: A white ceramic mug featuring a transferred fox design, illustrating the paper's great water absorption and quick drying properties, leading to a high transfer rate.
3. Maintenance and Storage
3.1 Paper Storage
To maintain the quality of your Hiipoo sublimation paper:
- Store unused paper in its original packaging or a sealed bag to protect it from moisture and humidity.
- Keep the paper flat to prevent curling or bending, which can cause feeding issues in printers.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
3.2 Printer Maintenance
Regularly clean your sublimation printer's print heads according to the manufacturer's instructions to ensure consistent print quality and prevent clogging from sublimation ink.
4. Troubleshooting Common Issues
4.1 Poor Transfer Quality or Faded Colors
- Check Ink: Ensure you are using genuine sublimation ink.
- Printer Settings: Verify that "Mirror Image" is enabled and print quality is set to high.
- Heat Press Settings: Confirm that the temperature, time, and pressure settings are appropriate for your specific blank material (refer to the Suggested Transfer Settings table). Insufficient heat or time can lead to poor transfer.
- Blank Material: Ensure your blank is specifically designed for sublimation and has a proper polymer coating.
4.2 Paper Jamming or Rolling
Hiipoo 120g sublimation paper is designed to be thicker to prevent rolling and ensure smooth printing. If you experience jamming:
- Paper Loading: Re-check that the paper is loaded correctly and flat in the printer tray.
- Storage: Ensure the paper has been stored flat and in a dry environment to prevent curling.
- Printer Rollers: Clean your printer's rollers if they appear dirty or worn.
4.3 "Gear Prints" or Marks on Transfer
The 120g thickness of Hiipoo sublimation paper helps minimize gear prints. If marks appear:
- Printer Rollers: Inspect your printer's internal rollers for any debris or damage that might be causing marks.
- Paper Quality: Ensure the paper is free from creases or imperfections before printing.
5. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Hiipoo |
| Model | 120g 8.5x11'' |
| Sheet Size | 8.5 x 11 inches |
| Paper Weight | 120 gsm |
| Sheet Count | 110 sheets |
| Paper Finish | Smooth |
| Color | White (printing side), Pink (back side) |
| Material Features | Biodegradable |
| Transfer Rate | ≥ 98% |
| Drying Time | Instant Dry |
6. Warranty and Support
6.1 Return Policy
This product is subject to a 30-day return policy for refund or replacement. Please refer to the retailer's specific return guidelines for detailed information.
6.2 Customer Support
For further assistance or inquiries regarding Hiipoo products, please visit the official Hiipoo store or contact their customer service through the retailer's platform.