Introduction
Thank you for purchasing the Ryght KWADRA Mini Wireless Speaker. This manual provides essential information for the safe and efficient use of your device. Please read it carefully before use and retain it for future reference.
Package Contents
- Ryght KWADRA Mini Wireless Speaker
- USB Charging Cable
- User Manual
Product Overview
Familiarize yourself with the various parts and controls of your Ryght KWADRA Mini Wireless Speaker.
Figure 1: Top view of the speaker, highlighting the textured speaker grille.
Figure 2: Angled view of the speaker, displaying the side control panel and the flexible carrying strap.
Figure 3: Close-up of the control buttons: Volume Up (+), Play/Pause/Next Track, and Volume Down (-).
Figure 4: Side panel with the On/Off switch, Micro USB charging port, and 3.5mm AUX-in port. A blue LED indicator is visible next to the charging port.
Setup
1. Charging the Speaker
- Connect the Micro USB end of the charging cable to the speaker's charging port (refer to Figure 4).
- Connect the USB-A end of the charging cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will illuminate during charging and turn off or change color when fully charged.
2. Powering On/Off
- To power on, slide the ON/OFF switch to the 'ON' position (refer to Figure 4). An audible tone or LED indicator will confirm power-on.
- To power off, slide the ON/OFF switch to the 'OFF' position.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing LED).
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "KWADRA Mini" from the list of found devices.
- Once paired, the speaker will emit a confirmation tone, and the LED indicator will stop flashing and remain solid.
Operating Instructions
Music Playback (Bluetooth Mode)
- Play/Pause: Press the Play/Pause button (center button, Figure 3) once.
- Next Track: Press and hold the Play/Pause button for approximately 2 seconds.
- Volume Up: Press the '+' button (Figure 3).
- Volume Down: Press the '-' button (Figure 3).
AUX-in Mode
- Connect a 3.5mm audio cable (not included) from your audio source to the AUX-in port on the speaker (Figure 4).
- The speaker will automatically switch to AUX-in mode.
- Volume control can be adjusted via the speaker's buttons or your audio source. Playback controls (play/pause, next track) may not function in AUX-in mode and should be controlled from the audio source.
Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the speaker to extreme temperatures, direct sunlight, or high humidity.
- Do not immerse the speaker in water.
- Store the speaker in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker using the provided USB cable. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode or too far from device. | Ensure speaker is on and LED is flashing. Move speaker closer to your device (within 10 meters). Turn Bluetooth off and on again on your device. |
| No sound or low volume. | Volume too low on speaker or connected device. | Increase volume on both the speaker and your connected device. Ensure the speaker is properly paired or connected via AUX-in. |
| Sound distortion. | Volume too high or weak Bluetooth signal. | Reduce volume on speaker and/or connected device. Move speaker closer to your device to improve signal. |
Specifications
- Model: R482181
- Output Power: 3 Watts
- Connectivity: Bluetooth
- Dimensions (L x W x H): 7 x 4 x 7 cm
- Weight: 78 Grams
- Mounting Type: Table Mount
- Speaker Type: Wireless
Safety Information
- Do not disassemble, repair, or modify the speaker.
- Keep the speaker away from water, fire, and high voltage equipment.
- Avoid prolonged exposure to loud volumes, which may cause hearing damage.
- Dispose of the product and its battery responsibly according to local regulations.
Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official RYGHT website or contact their customer service.