Product Overview
The Sicsmiao Projection Alarm Clock BLE007 is a versatile device designed to enhance your daily routine with multiple features including time projection, dual alarms, FM radio, sunrise simulation, and USB charging ports. This manual provides detailed instructions for setup, operation, and maintenance.
Image: Overview of the Sicsmiao Projection Alarm Clock highlighting its multifunctional capabilities including time display, projection, alarms, radio, and charging ports.
Setup
1. Unboxing and Package Contents
Carefully remove all components from the packaging. The package should contain:
- 1 x Sicsmiao LED Digital Alarm Clock
- 1 x User Manual (this document)
- 1 x USB Cable
- 1 x Power Adapter (5.0V, 2A)
2. Power Connection
Connect the provided USB cable to the alarm clock and then plug the power adapter into a standard electrical outlet (AC 100-240V, 50/60Hz). The clock requires AC power for all functions, including the night light, time projection, FM radio, U-disk, and alarm.
3. Battery Backup
The clock includes a built-in CR2030 battery. This battery serves as a backup to maintain time and alarm settings during power outages. It does not power the clock's display or functions.
4. Initial Time Setting
Upon first power-up or after a prolonged power loss without battery backup, the clock may require time adjustment. Refer to the 'Operating' section for detailed instructions on setting the time and date.
Operating Instructions
1. Time Display and Format
The 4-inch LED display shows the current time. You can switch between 12-hour and 24-hour formats. The 12-hour format is the default setting.
- Setting Time: Press and hold the 'Time Set' button. Use the '+' and '-' buttons to adjust hours and minutes. Press 'Time Set' again to confirm.
- Changing 12/24 Hour Format: While in time setting mode, press the '12/24H' button to toggle between formats.
2. Time Projection Feature
The clock can project the time onto a ceiling or wall. The projector is 180° adjustable for optimal viewing.
Image: The clock projecting the time onto a ceiling, demonstrating its 180° adjustable projection feature and different brightness levels.
- Activating Projection: Press the 'Projection' button to turn the projection on or off.
- Adjusting Brightness: Press the 'Projection' button repeatedly to cycle through projection brightness levels: OFF, Low, Mid, High.
- Adjusting Projection Angle: Manually rotate the projector lens on the side of the clock to adjust the angle of the projected time.
- Automatic Projection On/Off: The projection can be set to automatically turn on and off at specific times (e.g., PM 10:00 to AM 8:00). Refer to the full user manual for specific button sequences for this advanced setting.
3. Alarm Settings
The clock features dual alarms with snooze functionality and various ringtone options.
Image: Illustration of dual alarm settings, including weekday and weekend modes, and options for various alarm sounds.
- Setting Alarms: Press and hold 'Alarm 1' or 'Alarm 2' button. Use '+' and '-' to set the desired alarm time. Press the alarm button again to confirm.
- Alarm Repeat Modes: Choose from 4 repeat modes: Everyday (1-7), Mon-Sat (1-6), Mon-Fri (1-5), Sat-Sun (6-7).
- Ringtone Selection: Select from 5 built-in songs (S01-S05), use your own songs from a U-disk (S06), or use the FM radio (S07) as a ringtone.
- Alarm Volume: Adjust the alarm volume with 5 selectable levels (V01-V05).
- Snooze Function: When an alarm sounds, press the 'Snooze/Light' button for an additional 9 minutes of sleep. This can be repeated up to 5 times.
4. Sunrise Simulation and Night Light
The clock features a sunrise simulation light and a 7-color mood light with 30 levels of brightness adjustment.
Image: The clock displaying the sunrise simulation feature, showing light intensity increasing over time, and various mood light color options.
- Sunrise Simulation: For Alarm 1 only, the light gradually increases over a 30-minute period before your set alarm time, simulating a natural sunrise.
- 7-Color Mood Light: Press the 'Light' button to cycle through different colors or set a specific color.
- Brightness Adjustment: Use the '+' and '-' buttons to adjust the brightness of the mood light across 30 levels.
5. FM Radio and U-Disk Playback
Enjoy FM radio or play music directly from a U-disk.
Image: The clock displaying FM radio functionality and the option to play music from a U-disk, along with sleep timer settings.
- FM Radio: Extend the 60-inch antenna for better signal reception. Press the 'FM' button to turn on the radio. Press and hold to auto-scan and save available stations (87.0-108.0MHz). Use '+' and '-' to tune manually or select saved stations.
- U-Disk Playback: Insert a U-disk into the designated USB port. The clock will automatically detect and play audio files. Use the control buttons to navigate tracks.
- Sleep Timer: Set a sleep timer from 1 to 90 minutes. The sound and light will gradually decrease and turn off after the set duration, allowing you to fall asleep to music or ambient light.
6. USB Charging Ports
The clock features dual 5V/1.8A USB output interfaces on the back, allowing you to charge smartphones or other devices while you sleep.
Maintenance
1. Cleaning
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
2. Battery Replacement
The internal CR2030 backup battery is designed for long-term use. If the clock consistently loses settings during power outages, the backup battery may need replacement. This typically requires opening the device and should be performed by a qualified technician if you are unsure.
Troubleshooting
- No Display/Power: Ensure the power adapter is securely plugged into both the clock and a working electrical outlet. Check if the outlet is functional.
- Projection Unclear/Fuzzy: Adjust the focus of the projection lens by rotating it. Ensure the projection surface is within the optimal range (7-10ft).
- Alarm Not Sounding: Verify that the alarm is activated (alarm icon visible on display) and the volume is not set to zero. Check the alarm repeat mode.
- FM Radio Static: Extend the FM antenna fully. Try repositioning the clock for better reception. Perform an auto-scan to find stronger signals.
- USB Charging Not Working: Ensure the clock is powered by the AC adapter. Check the USB cable and the device being charged.
Specifications
Image: Detailed dimensions of the Sicsmiao Projection Alarm Clock and its included power accessories.
| Feature | Detail |
|---|---|
| Model | BLE007 |
| Size | 7 x 2.85 x 2.25 inches (17.8 x 7.2 x 5.7 cm) |
| Net Weight | 0.3 KG |
| Display | 4-inch LED Display |
| Projecting Range | 3-10 ft (Optimal: 7-10 ft) |
| Time Format | 12/24 Hour Switchable (12 Hour Default) |
| Projection Dimmer | OFF-Low-Mid-High |
| Screen Display Dimmer | OFF-Low-Mid-High |
| Light Features | Sunrise Simulation White Light & 7 Colors Mood Light (30-level adjustment) |
| Alarm Setting | Dual Alarms with 4 Repeat Modes |
| Alarm Sounds | 5 Built-in Songs, U-disk Custom Songs, FM Radio |
| Snooze Duration | 9 Minutes (up to 5 times) |
| FM Radio Frequency | 87.0-108.0MHz |
| Sleep Timer Selections | 1-90 minutes |
| Adapter Input | DC 100-240V, 50/60Hz, 0.4A |
| Adapter Output | 5.0V, 2A |
| Backup Battery | CR2030 (Built-in) |
| USB Charging Port | Dual 5V, 1.8A |
Warranty and Support
Sicsmiao is committed to providing quality products and customer satisfaction. This product is covered by the following:
- 30-Day Refund Policy: If you are not satisfied with your purchase, you may be eligible for a refund within 30 days.
- 3-Month Replacement: In case of product defects or malfunctions, a replacement may be provided within 3 months of purchase.
- 24-Hour Customer Service: For any inquiries, technical support, or warranty claims, please contact our customer service team. Refer to the product packaging or purchase platform for contact details.