JLeisure JL-17808

JLeisure Avenli 17807 Inflatable Swimming Pool User Manual

Model: JL-17808

Introduction

Thank you for choosing the JLeisure Avenli 17807 Inflatable Swimming Pool. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new pool. Please read all instructions carefully before use and retain this manual for future reference.

This JLeisure Prompt Set Above Ground Pool measures 10 feet in diameter and 30 inches in height, designed for ages 6 and up. It features super tough sidewalls constructed with three separate layers of puncture-resistant material for enhanced durability. The pool includes a convenient drain plug that accepts a garden hose, allowing for easy water drainage away from the pool area. Designed for quick setup, it can be ready for water in approximately 10 minutes without the need for special tools. Proper storage during the off-season will significantly extend the product's lifespan.

Safety Information

WARNING: Failure to follow these instructions can result in serious injury or death.

Setup Instructions

Setting up your JLeisure Avenli pool is quick and easy. No tools are required for assembly.

  1. Site Preparation: Choose a flat, level area in your backyard, free from rocks, sharp objects, or debris. Ensure the ground is firm and can support the weight of the filled pool.
    A JLeisure Avenli inflatable pool set up on a green lawn, ready for use.

    Image: The JLeisure Avenli pool positioned on a level, grassy area, demonstrating proper site selection.

  2. Unfold the Pool: Carefully unfold the pool liner and spread it out evenly on the prepared ground. Ensure the drain plug is positioned where it can be easily accessed for drainage.
  3. Inflate the Top Ring: Locate the inflation valve on the top ring of the pool. Use an air pump (not included) to inflate the top ring until it is firm to the touch but not over-inflated.
    A person using a hand pump to inflate the top ring of the JLeisure Avenli inflatable pool.

    Image: A user inflating the top ring of the pool with a manual air pump, illustrating the inflation process.

  4. Fill with Water: Begin filling the pool with water using a garden hose. As the pool fills, the sidewalls will rise. Smooth out any wrinkles in the bottom of the pool as it fills. Stop filling when the water level reaches the fill line indicated on the pool, or approximately 80% full (956 gallons capacity).
    A person filling the JLeisure Avenli inflatable pool with water using a garden hose.

    Image: A person filling the inflatable pool with water from a garden hose, showing the pool expanding as it fills.

    The JLeisure Avenli 10-foot by 30-inch inflatable swimming pool filled with water, ready for use.

    Image: The JLeisure Avenli inflatable pool, fully set up and filled with water, showcasing its round shape and blue color.

  5. Pump Connection (Optional): If using a pool pump (JLeisure 29P414US 300Gal/H Cartridge Pump recommended, sold separately), connect it according to the pump's instructions.

Operating the Pool

Once set up, your JLeisure Avenli pool is ready for enjoyment.

A family enjoying the JLeisure Avenli inflatable swimming pool.

Image: A family of five, including adults and children, enjoying the JLeisure Avenli inflatable pool, demonstrating its capacity for recreational use.

Maintenance

Regular maintenance will prolong the life of your pool and ensure a clean swimming environment.

Troubleshooting

ProblemPossible CauseSolution
Pool losing air from top ring.Puncture or loose valve cap.Locate the leak using soapy water. Patch small holes with the included repair kit. Ensure valve cap is tightly secured.
Water level decreasing rapidly.Leak in the pool liner.Inspect the pool liner for punctures or tears. Use the repair kit to patch any damage.
Water is cloudy or green.Improper water chemistry or insufficient filtration.Test water chemistry and adjust chemicals as needed. Clean or replace filter cartridge if using a pump. Shock treat the water if algae is present.
Pool is lopsided after filling.Uneven ground or insufficient inflation of top ring.Drain the pool, re-level the ground, and re-inflate the top ring firmly before refilling.

Specifications

Diagram showing the dimensions of the JLeisure Avenli inflatable pool: 10 feet diameter and 30 inches height.

Image: A diagram illustrating the 10-foot diameter and 30-inch height of the JLeisure Avenli inflatable pool.

Warranty and Support

This JLeisure product comes with a 6-month manufacturer warranty. Please retain your proof of purchase for warranty claims.

For technical support, replacement parts, or warranty inquiries, please contact JLeisure customer service.

JLeisure Customer Service: Refer to the contact information provided on the product packaging or visit the official JLeisure website for support details.

You can also visit the JLeisure Store on Amazon for more information and products.