Naviocean Infrared Red Light Therapy Belt User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective operation of your Naviocean Infrared Red Light Therapy Belt. This device utilizes both 660nm Red light and 850nm Near-Infrared light to support cellular repair and improve circulation, offering a convenient solution for targeted light therapy.

Important Safety Information

Please read all safety warnings before using the device. Failure to follow these instructions may result in injury or damage to the product.

• Caution: This product can generate heat and may cause potential burn hazards.
• Do not directly touch the LEDs during operation.
• Monitor skin temperature to prevent overheating. If the device feels too hot or causes discomfort, discontinue use immediately.
• Do not use near water or with wet skin.
• Keep out of reach of children.
• Individuals with diabetes, poor circulation, or skin conditions should consult a healthcare professional before using this device.
• Do not use on open wounds or broken skin.

Product Overview and Working Principle

The Naviocean Infrared Red Light Therapy Belt is equipped with 105 LEDs, combining two specific wavelengths for therapeutic benefits.

660nm Red Light

This wavelength can reach deep layers of the skin, stimulating cellular repair and increasing circulation. It is visible to the naked eye and contributes to the red glow of the device.

850nm Near-Infrared Light

Invisible to the naked eye, this light penetrates deeper into tissues, causing thermal effects that increase tissue temperature, promote blood circulation, enhance metabolism, and improve cell vitality.

The image displays the main components of the therapy belt: the flexible belt with visible red LEDs, the power adapter, and the wired control panel.

This diagram illustrates the two types of light emitted by the belt (660nm Red and 850nm Near-Infrared) and highlights various body areas where the belt can be applied for pain and soreness relief, including joints and muscles.

Package Contents

Upon opening your package, please verify that all the following items are included:

• 1 x Naviocean Infrared Red Light Therapy Belt
• 1 x Control Panel
• 1 x Power Cord (AC 100-240V plug)
• 1 x USB Cable (suitable for 5V power bank)
• 1 x User Manual
• 1 x Exquisite Gift Box

Specifications

Setup

Follow these steps to set up your Naviocean Infrared Red Light Therapy Belt:

1. Unpack all components from the gift box.
2. Connect the control panel cable securely to the therapy belt's input port.
3. Choose your power source:
   • For Wall Outlet Use: Connect the power cord to the control panel and plug it into a standard AC 100-240V wall outlet.
   • For Portable Use: Connect the USB cable to the control panel and plug the other end into a 5V power bank (not included).
4. Ensure all connections are secure before proceeding to operation.

Operating Instructions

The control panel allows you to manage the device's settings for an optimal therapy session.

This image shows the wired control panel with clearly labeled buttons for power, adjusting brightness levels (L0-L4), and setting the treatment timer (5/10/15/20/25/30 minutes).

1. Power On/Off: Press the On/Off switch button on the control panel to turn the device on or off. The LEDs will illuminate upon activation.
2. Adjust Brightness: Use the "Brightness Increase" (+) and "Brightness Diminish" (-) buttons to cycle through 5 brightness levels (L0 to L4). L0 is the lowest brightness, and L4 is the highest. Higher brightness levels correspond to increased heat output.
3. Set Timer: Press the "Time Setting" button to select your desired treatment duration: 5, 10, 15, 20, 25, or 30 minutes. The device will automatically shut off after the selected time has elapsed.
4. Application: Wrap the belt around the desired body area. The flexible design allows for comfortable and effective use on the back, chest, arms, shoulders, knees, and other body parts. Ensure the LED side is facing the skin.

A woman is shown comfortably using the therapy belt around her waist, highlighting its wearable and portable nature for use at home or office.

This image illustrates the compact dimensions and light weight of the belt, emphasizing its portability. It also includes a visual representation of its potential 'fat burning effect' over time.

This graphic demonstrates the versatility of the therapy belt, showing its applicability for pain relief and other benefits on the back, shoulder, neck, legs, and even for use on pets.

Maintenance

Proper care and maintenance will extend the life of your therapy belt.

• Cleaning: Disconnect the device from the power source before cleaning. Wipe the surface of the belt with a soft, damp cloth. Do not immerse the device in water or use harsh chemicals.
• Storage: Store the belt in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original gift box or a protective case to prevent damage.
• Handling: Avoid bending or creasing the LED section excessively to prevent damage to the internal components. Do not fold the belt tightly.

Troubleshooting

If you encounter any issues with your device, please refer to the following table for common problems and solutions.

Warranty and Support

Naviocean is committed to providing high-quality products and excellent customer service.

• Warranty: Your product comes with a warranty that includes free return, replacement, and other services. Please refer to the product packaging or contact customer service for specific warranty terms and conditions.
• Customer Support: For any needs, questions, or issues, please contact Naviocean customer service. They are available 7x24 hours to assist you.
• Contact Information: For support, please visit the official Naviocean store on Amazon or use the contact details provided in your product packaging.