Blomiky 35-ZJ02 Wheel Tire Instruction Manual

Introduction

This manual provides essential information for the proper installation, use, and maintenance of your Blomiky 35-ZJ02 Wheel Tires. These tires are designed as spare parts for various 1/16 scale RC trucks, ensuring optimal performance and durability. Please read this manual thoroughly before installation and use.

Product Overview

The Blomiky 35-ZJ02 Wheel Tire set includes two complete wheel and tire assemblies. These are direct replacement parts for a range of RC truck models.

Part Number: 35-ZJ02
Compatibility:
- Blomiky XLH Hosim 4WD 9130, 9135, 9136, 9137, 9138, Q901, Q902, Q903 RC trucks
- BEZGAR HM164, HM163 1/16 brushless RC Truck
- Leagendary 1/16 Brushless RC trucks
- VATOS Spirit 1/16 Brushless RC trucks
- MIEBELY and Gxatt 1:16 All Terrain Green Remote Control Truck

Front view of two Blomiky 35-ZJ02 RC truck wheel tires with silver rims

Image 1: Front view of the Blomiky 35-ZJ02 Wheel Tires, showcasing the aggressive tread pattern and silver-colored wheel rims.

Setup and Installation

Follow these steps to replace or install the Blomiky 35-ZJ02 Wheel Tires on your compatible RC truck.

Preparation: Ensure your RC truck is powered off and placed on a stable, flat surface. Gather any necessary tools, such as a small cross wrench or hex wrench, typically included with your RC truck for wheel removal.
Remove Old Wheel (if applicable): Carefully loosen the wheel nut located at the center of the wheel hub. Once loose, remove the nut and gently pull the old wheel and tire assembly off the axle. Keep the wheel nut and any washers safe.
Inspect Axle: Check the RC truck's axle for any debris or damage. Clean if necessary.
Install New Wheel: Align the new Blomiky 35-ZJ02 Wheel Tire with the axle. Ensure the hex hub on the wheel properly engages with the hex on the axle. Push the wheel firmly onto the axle.
Secure Wheel: Re-attach the wheel nut (and washers, if any) onto the axle. Tighten the nut securely, but do not overtighten, as this can damage the wheel hub or axle. The wheel should spin freely without excessive wobble.
Repeat: Repeat the process for all wheels you intend to replace.

Rear view of two Blomiky 35-ZJ02 RC truck wheel tires, showing the internal structure

Image 2: Rear view of the Blomiky 35-ZJ02 Wheel Tires, illustrating the internal spoke structure and hex mounting point for installation.

Operating Considerations

While these tires are designed for various terrains, their performance can vary based on the surface. For optimal control and longevity, consider the following:

Traction: The tread pattern is designed for general off-road use. On very smooth or low-traction surfaces, the grip may be reduced compared to specialized racing tires.
Driving Style: Aggressive driving, such as sharp turns at high speeds or frequent wheelies, can accelerate tire wear and potentially affect handling.
Surface Conditions: Avoid prolonged use on extremely abrasive surfaces (e.g., rough concrete, sharp gravel) to prevent premature wear or damage to the tire rubber.

Maintenance

Regular maintenance will extend the life of your Blomiky 35-ZJ02 Wheel Tires and ensure consistent performance.

Cleaning: After each use, especially in dirty or muddy conditions, clean the tires and wheels. Use a soft brush or cloth and mild soap with water to remove dirt and debris. Rinse thoroughly and allow to air dry completely before storage.
Inspection: Periodically inspect the tires for signs of wear, cracks, punctures, or damage to the wheel rims. Check that the wheel nuts are still securely tightened.
Storage: Store the tires in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to UV light and heat can degrade the rubber material.

Troubleshooting

Problem	Possible Cause	Solution
Reduced Traction/Poor Grip	Tire material characteristics (harder rubber) Worn tread Driving surface conditions (smooth, dusty)	Adjust driving style for current surface. Consider using on surfaces where these tires perform best. Replace tires if tread is excessively worn.
Wheel Wobble	Loose wheel nut Improper installation on axle hex Damaged wheel or axle	Tighten wheel nut securely. Re-install wheel, ensuring proper alignment with axle hex. Inspect wheel and axle for damage; replace if necessary.
Tire Puncture or Tear	Impact with sharp object Extreme wear	Replace the damaged tire. Avoid driving on surfaces with sharp debris.

Specifications

Feature	Detail
Product Dimensions	3.35 x 1.85 x 1.85 inches (per tire)
Item Weight	1.9 ounces (per tire)
Item Model Number	35-ZJ02 (also referred to as 30-ZJ02 or QZJ01)
Manufacturer Recommended Age	14 years and up
Manufacturer	Xinlehong

Warranty and Support

For warranty information or technical support regarding your Blomiky 35-ZJ02 Wheel Tires, please contact the retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

You can visit the official Blomiky store on Amazon for more product information and support: Blomiky Store

Blomiky 35-ZJ02