1. Product Overview
The Splash N Color Bumper Extender Guard Height Adjuster is designed to prevent robotic vacuum cleaners, such as Roomba and Eufy models, from becoming stuck or lost under furniture. This product provides an additional height barrier, allowing your robot vacuum to navigate more effectively around obstacles.
Each package includes two (2) bumper extender pieces, crafted from durable material for long-lasting use. The 0.6-inch height adjustment helps ensure your vacuum avoids low-clearance areas.
Image 1.1: Two Splash N Color Bumper Extenders positioned next to a robotic vacuum cleaner.
2. Package Contents
- 2 x Bumper Extender Guard Height Adjusters (0.6 Inches)
Note: Adhesive is not included and must be purchased separately. Super glue or strong double-sided mounting tape is recommended for secure attachment.
3. Setup and Installation
Proper installation of the bumper extenders is crucial for their effectiveness and durability. Follow these steps for optimal results:
- Prepare the Surface: Ensure the surface of your robotic vacuum cleaner where the extenders will be attached is clean, dry, and free from dust, dirt, or grease. Use an alcohol wipe if necessary and allow it to dry completely.
- Choose Adhesive: Select a strong adhesive. Super glue or heavy-duty double-sided mounting tape (e.g., nano tape, Gorilla mounting tape) is recommended for a secure bond.
- Position the Extenders: Carefully position the bumper extenders on the top surface of your robotic vacuum. Ensure they are placed symmetrically and do not obstruct any sensors, charging contacts, or operational buttons. Avoid placing them too close to the home sensor if applicable.
- Apply Adhesive:
- For Super Glue: Apply a thin, even layer of super glue to the bottom surface of the bumper extender. Press firmly onto the vacuum cleaner's surface and hold for the recommended time as per the glue manufacturer's instructions.
- For Mounting Tape: Cut the mounting tape to the appropriate size for the bumper extender. Apply the tape to the bottom surface of the extender, then peel off the backing and press firmly onto the vacuum cleaner's surface.
- Allow to Cure: Allow the adhesive to cure fully before operating the vacuum cleaner. This may take several hours, or up to 24 hours, depending on the adhesive used. Refer to the adhesive product's instructions for specific curing times.
Image 3.1: Illustration of the easy installation process, emphasizing cleaning the surface and using super glue for best results.
Image 3.2: A robotic vacuum cleaner with installed bumper extenders, demonstrating how it navigates near furniture.
4. Operating Instructions
Once installed, the bumper extenders work passively to enhance your robotic vacuum's navigation. They increase the overall height of your vacuum, preventing it from entering spaces that are too low, such as under certain sofas, cabinets, beds, or other furniture.
- The extenders act as a physical barrier, causing the vacuum to detect an obstacle sooner than its original height would allow.
- This helps to avoid situations where the vacuum gets wedged, stuck, or damaged by attempting to clean in areas it cannot fully clear.
- The extenders are designed not to interfere with the robot's normal cleaning functions or its ability to return to its charging dock, provided they are positioned correctly and do not block sensors.
Image 4.1: A robotic vacuum cleaner on carpet, demonstrating the function of bumper extenders in preventing it from getting stuck.
Image 4.2: Examples of furniture (couch, cabinet, bed, baby cot) where the bumper extenders help prevent the robot vacuum from becoming trapped.
5. Maintenance
The bumper extenders require minimal maintenance to ensure their longevity and effectiveness:
- Cleaning: Periodically wipe the extenders with a damp cloth to remove any dust or debris. Avoid harsh chemicals that could degrade the material or adhesive.
- Inspection: Regularly check the extenders for any signs of wear, damage, or loosening from the vacuum cleaner.
- Re-attachment: If an extender becomes loose, clean both surfaces thoroughly and re-attach using a strong adhesive as described in the "Setup and Installation" section.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bumper extender falls off. | Insufficient adhesive strength or improper surface preparation. | Clean both the vacuum surface and the extender thoroughly. Re-attach using a high-strength adhesive like super glue or heavy-duty mounting tape. Allow adequate curing time. |
| Vacuum still gets stuck under furniture. | Furniture clearance is still too low, or extenders are not positioned optimally. | Verify the height of the furniture. If the clearance is only slightly above 0.6 inches, the extender may not be sufficient. Ensure extenders are placed at the highest points of the vacuum's bumper. Consider if a larger extender size (if available from the manufacturer) would be more suitable for your specific furniture. |
| Extender breaks or cracks. | Excessive force from impacts or material fatigue. | While made from durable material, extreme impacts can cause damage. Replace the damaged extender. Ensure the vacuum's navigation system is functioning correctly to minimize hard impacts. |
| Vacuum cannot dock or navigate properly. | Extenders are obstructing sensors or charging contacts. | Carefully reposition the extenders to ensure they do not cover any sensors (e.g., home sensor) or interfere with the charging dock connection. |
7. Specifications
- Brand: Splash N Color
- Model Number: IJ-PCP7-ZSII
- UPC: 785939617696
- Color: Black
- Height Adjustment: 0.6 Inches (for this specific variant)
- Compatible Devices: Roomba, Eufy robot vacuum cleaners (and similar models)
- Material: Durable Material (3D printed plastic, as per reviews)
- Included Components: 2-pack Roomba extension vacuum robot bumper
- Recommended Use: Preventing vacuum cleaner from getting stuck, efficient cleaning around furniture.
Image 7.1: Key features of the bumper extender: durable material, prevention of getting stuck, and ease of installation.
8. Customer Support
For further assistance, questions, or concerns regarding your Splash N Color Bumper Extender Guard Height Adjuster, please contact the manufacturer directly through their official channels or the platform where the product was purchased.
Please have your model number (IJ-PCP7-ZSII) and purchase details ready when contacting support.