Equator EZ5500CV Ver 3 Combo Washer Dryer Instruction Manual

1. Product Overview

The Equator EZ5500CV Ver 3 Combo Washer Dryer is an all-in-one appliance designed for washing and drying laundry. This unit features a 1.9 cubic feet stainless steel drum, 1400 RPM spin speed, and offers both vented and ventless drying options. It operates on standard 110-volt electricity and includes various wash and dry cycles for different fabric types.

Front view of the Equator EZ5500CV Combo Washer Dryer, highlighting its compact design and control panel.

2. Safety Information

Before operating the appliance, read all instructions thoroughly to prevent injury or damage. Keep children away from the appliance during operation. Ensure the machine is properly installed and leveled to avoid operational issues.

• Child Lock: This feature secures cycle settings to prevent unintended changes by children.
• Proper Detergent: Use only High-Efficiency (HE) detergent for optimal performance and to prevent oversudsing.
• Leveling: The machine must be level to avoid leaks and excessive vibration during operation.

Image demonstrating the child lock feature, showing a child near the appliance.

3. Setup and Installation

3.1 Unpacking and Initial Inspection

Upon delivery, inspect the appliance for any shipping damage. Retain all packaging materials until you are satisfied with the product's condition.

3.2 Removing Shipping Rods

Important: Before installation, remove all shipping rods. Failure to do so will cause severe vibration and potential damage during operation.

3.3 Leveling the Appliance

Use a level to ensure the machine is perfectly balanced. Adjust the adjustable legs as needed. Proper leveling is crucial to prevent leaks and reduce noise during cycles.

3.4 Connecting Water and Power

Connect the provided fill hose to a cold water supply. Ensure all connections are secure to prevent leaks. Plug the power cord into a standard 110-volt electrical outlet. The unit requires 13 Amps and 1300 watts.

3.5 Venting Options (Vented/Ventless)

This combo unit offers convertible venting. You can choose between vented (hot air) or ventless (condensing) drying modes. Refer to the diagram below for setup.

Diagram showing how to configure the appliance for either vented or ventless drying.

3.6 Included Components

• Drain Hose
• Fill Hose
• Power Cord

4. Operating Instructions

4.1 Loading Laundry

Load laundry into the stainless steel drum. Avoid overloading to ensure proper washing and drying. The unit has a 1.9 cubic feet capacity.

4.2 Adding Detergent and Fabric Softener

Use the detergent dispenser tray to add High-Efficiency (HE) detergent and fabric softener. Refer to the product image for dispenser location.

Labeled diagram of the appliance, indicating the detergent dispenser tray and other key components.

4.3 Selecting a Cycle

The electronic control panel features a knob and touch controls. Select from 10 washing cycles and 2 drying cycles, totaling 14 option cycles. Common cycles include:

• Normal
• Pre-wash + Heavy
• Quick 20
• Delicate
• Wool
• Pet Cycle

The color-coded LED display simplifies cycle selection and monitoring.

Close-up view of the appliance's color-coded LED display, showing cycle information.

4.4 Drying Modes

Switch between vented and ventless drying modes via the control panel. Vented drying is approximately 30% faster.

Image showing the control panel with options to select between vented and ventless drying modes.

4.5 Special Features

• Add-a-Sock: Pause the cycle for 5 seconds. The door unlocks after 2 minutes, allowing you to add items. Reload, close, and restart.
• Quiet Cycle: Operates at a low RPM, producing less than 60 dB of noise.
• Winterize: A quick 2-minute cycle designed for winterization.
• Delay Start: Program the machine to start a cycle at a later time.

Image depicting the 'Add-a-Sock' feature, where a user can pause the cycle to add forgotten items.

5. Maintenance

5.1 Cleaning the Coin Trap

The appliance features an easy-to-open coin trap. Regularly check and clean the coin trap to prevent blockages and ensure efficient drainage.

Image illustrating the location and accessibility of the coin trap for maintenance.

5.2 Self-Clean Cycle

Utilize the self-clean cycle periodically to maintain the cleanliness of the drum and internal components, preventing odors and residue buildup.

5.3 Oversuds Control

The appliance is equipped with oversuds control to manage excessive foam, which can occur if too much detergent is used. Always use HE detergent.

6. Troubleshooting

If you encounter issues with your Equator EZ5500CV, refer to the following common troubleshooting tips:

• Machine Vibrates Excessively: Ensure all shipping rods have been removed. Verify the appliance is perfectly level using its adjustable legs.
• Water Leaks: Check all hose connections for tightness. Confirm the machine is level. Inspect the coin trap for blockages.
• Drying Takes Too Long / Clothes Remain Damp: Ensure the load size is appropriate for the machine's capacity. Verify the correct drying mode (vented or ventless) is selected. For vented mode, ensure the vent hose is clear and unobstructed.
• E5 Error Code: This typically indicates an issue with water drainage or supply. Check water inlet and drain hoses for kinks or blockages. Clean the coin trap.
• Door Will Not Open: Ensure the cycle has completed and the machine has cooled down. If the machine is still running or has recently finished a hot cycle, there may be a safety delay before the door unlocks.
• Unpleasant Odor: Run a self-clean cycle. Ensure you are using HE detergent and not overloading the machine.

For persistent issues, contact customer support.

7. Specifications

8. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Equator Appliances website. For technical assistance, troubleshooting not covered in this manual, or to inquire about service, please contact Equator customer support.

Manufacturer: Eco Appliances Inc