JONJUMP 12 Cans Massage Vacuum Cupping Set User Manual

1. Introduction

Thank you for choosing the JONJUMP 12 Cans Massage Vacuum Cupping Set. This product integrates modern technology with traditional Chinese medicine principles to provide an effective and convenient cupping experience. Designed for ease of use, this set aims to support relaxation, alleviate discomfort, and promote overall well-being.

The vacuum cupping method simplifies the traditional cupping process, making it accessible for home use while maintaining therapeutic benefits. It is ideal for various applications, including aiding in the treatment of rheumatism, promoting decompression, relieving fatigue, and supporting detoxification processes.

2. Safety Information

Please read all safety instructions carefully before using the cupping set. Improper use may lead to injury or adverse effects.

• Do not use on open wounds, inflamed skin, or areas with skin conditions.
• Avoid using on sensitive areas such as eyes, nose, or mouth.
• Consult a healthcare professional before use if you have any pre-existing medical conditions, are pregnant, or are taking medication.
• Do not leave cups on for excessively long periods. Recommended duration is typically 5-15 minutes.
• Discontinue use immediately if you experience severe pain, dizziness, or discomfort.
• Keep out of reach of children.
• Clean cups thoroughly before and after each use to maintain hygiene.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not intended to replace professional medical advice or treatment.

3. Package Contents

Verify that all components are present and in good condition upon opening the package.

Image Description: This image displays the complete JONJUMP 12 Cans Massage Vacuum Cupping Set. It includes a dark brown box, a white and grey vacuum pump, twelve clear plastic cupping cups of various sizes, a grey connecting hose, and several small white valve caps. The items are neatly arranged on a light grey surface.

• 12 x Vacuum Cupping Cups (various sizes)
• 1 x Hand-operated Vacuum Pump
• 1 x Connecting Hose (for self-application on back)
• Magnetic Needles/Points (pre-installed in cups)
• User Manual (this document)

4. Setup

Follow these steps to prepare your cupping set for use:

1. Clean the Cups: Before first use and after each subsequent use, thoroughly clean all cupping cups with mild soap and warm water. Rinse well and allow them to air dry completely.
   

   Image Description: This image shows two clear plastic cupping cups. One cup is upright, displaying its transparent body and yellow top valve. The other cup is on its side, revealing the black rubber seal around its rim, which is crucial for creating a vacuum.

2. Prepare the Skin: Ensure the skin area where you intend to apply the cups is clean, dry, and free of excessive hair. For better suction and glide, you may apply a small amount of massage oil or lotion to the skin.
3. Assemble the Pump (if needed): The hand-operated vacuum pump is typically pre-assembled. If using the connecting hose for self-application on the back, attach one end of the hose to the pump's nozzle and the other end to the top valve of the cupping cup.
   

   Image Description: This image shows the white and grey hand-operated vacuum pump connected to a clear cupping cup by a long, flexible grey hose. This setup allows for self-application of cupping on areas that are difficult to reach directly with the pump.

5. Operating Instructions

Follow these steps for effective and safe cupping:

1. Select a Cup: Choose a cup size appropriate for the area of the body you wish to treat.
   

   Image Description: A close-up view of a clear plastic cupping cup, lying on its side. A red overlay highlights the opening, indicating a diameter of 78mm, demonstrating the size of one of the cups.

2. Apply the Cup: Place the opening of the cup firmly onto the desired skin area. Ensure a good seal is formed between the cup rim and the skin.
3. Create Vacuum: Attach the vacuum pump to the top valve of the cup. Pump the handle 1-3 times to create the desired level of suction. Do not over-pump, as excessive suction can cause discomfort or bruising. The skin inside the cup should be slightly raised.
   

   Image Description: A hand is shown holding the white and grey vacuum pump. A red label on the pump indicates a measurement of "40mm", likely referring to a dimension of the pump's handle or body.
4. Duration: Leave the cups in place for 5 to 15 minutes. The exact duration depends on individual comfort and desired intensity. Do not exceed 20 minutes per session.
5. Remove the Cup: To release the vacuum, gently pull the small yellow valve stem at the top of the cup. Air will enter, and the cup will detach easily. Do not forcefully pull the cup off the skin.
6. Target Areas: This cupping set can be used on various body parts, including shoulders, neck, back, knees, and hands.
   

   Image Description: This image illustrates common application areas for the cupping cups. It features three circular insets showing a cupping cup applied to a person's shoulder/neck, knee, and hand, with text labels indicating "Shoulders.Neck", "Knees", and "Hands" respectively.

6. Maintenance

Proper care and maintenance will extend the life of your cupping set.

• Cleaning: After each use, disassemble the cups (if applicable) and wash them with mild soap and warm water. Use a soft cloth or sponge to clean the inside and outside surfaces. Rinse thoroughly to remove all soap residue.
  

  Image Description: A close-up shot of a single clear plastic cupping cup, standing upright. The image highlights the transparent material, the yellow valve stem at the top, and the smooth, rounded rim at the bottom.

• Drying: Allow all components to air dry completely before storing. Do not use abrasive cleaners or harsh chemicals, as they may damage the plastic.
• Storage: Store the cupping set in a clean, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a dedicated storage container to protect it from dust and damage.
• Pump Care: The vacuum pump generally requires minimal maintenance. If suction weakens, check for any blockages in the nozzle or hose.

7. Troubleshooting

If you encounter any issues while using your cupping set, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

This product is manufactured by JONJUMP. For any questions, concerns, or support needs regarding your JONJUMP 12 Cans Massage Vacuum Cupping Set, please contact the seller directly through the platform where you made your purchase.

While specific warranty details are not provided in this manual, most products come with a standard return or replacement policy. Please refer to your purchase receipt or the seller's policy for details on returns, replacements, or warranty claims.

Seller: jingjingshishidashangmaoyouxiangongsi