Introduction
This manual provides essential information for the assembly, safe use, and maintenance of your Relaxdays Garden Bench, Model 10036089. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This 2-seater bench features an antique design with floral ornaments, suitable for gardens, balconies, and terraces.
Image: The Relaxdays Garden Bench, Model 10036089, showcasing its full antique design and white-green finish.
Safety Warnings
- Do not expose the bench to extreme temperatures, as this may damage the material.
- Always ensure the bench is placed on a level and stable surface to prevent tipping and potential injury.
- Do not exceed the maximum load capacity of 200 kg (approximately 440 lbs).
- Keep small children and pets away during assembly to prevent access to small parts.
- Regularly check all fasteners to ensure they remain tight and secure.
Package Contents
Before beginning assembly, please verify that all parts listed below are present and undamaged.
- 1x Garden Bench (disassembled parts)
- Assembly Hardware (screws, bolts, washers, nuts)
- Assembly Instructions (this manual)
Note: Decorative items shown in product images are not included.
Assembly Instructions
Assembly is straightforward and requires basic tools, which are typically included with the hardware. It is recommended to assemble the bench on a soft, clean surface to prevent scratching.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the parts list (if provided separately, or visually confirm main components: seat, backrest, two side frames/legs, hardware).
- Attach Side Frames to Seat: Position the seat upside down. Align one side frame (leg assembly) with the pre-drilled holes on one side of the seat. Insert the appropriate bolts and washers, and loosely secure with nuts. Repeat for the other side frame.
- Attach Backrest: Position the backrest. Align its attachment points with the corresponding holes on the side frames and/or seat. Insert bolts and washers, and loosely secure with nuts.
- Tighten All Fasteners: Once all parts are loosely assembled, carefully turn the bench upright. Ensure it is stable and level. Systematically tighten all bolts and nuts using the provided wrench or your own tools. Do not overtighten, but ensure all connections are firm.
- Adjust Feet: The bench is equipped with adjustable feet to compensate for uneven surfaces. Turn the feet clockwise or counter-clockwise until the bench is perfectly level and stable.
Image: Detail of the adjustable feet, allowing for stability on uneven ground.
Operating Guidelines
The Relaxdays Garden Bench is designed for outdoor seating for up to two individuals. Its robust construction of aluminum and cast iron ensures durability.
- Placement: Choose a suitable location in your garden, on your balcony, or terrace. Ensure the surface is firm and level.
- Comfort: For enhanced comfort, consider adding cushions (not included) to the seat.
- Weight Distribution: Distribute weight evenly when sitting to maintain stability.
Image: The garden bench in use, demonstrating its suitability for outdoor relaxation.
Care and Maintenance
Proper care will extend the life and preserve the appearance of your garden bench.
- Cleaning: Wipe the bench regularly with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with clean water. Avoid abrasive cleaners or harsh chemicals.
- Rust Prevention: Although made from durable materials, inspect the bench periodically for any signs of rust, especially on cast iron components. Touch up any chipped paint to prevent rust formation.
- Winter Storage: During harsh winter conditions or prolonged periods of non-use, it is advisable to store the bench indoors or cover it with a protective outdoor furniture cover to shield it from extreme weather.
- Fastener Check: Periodically check all bolts and nuts and tighten them if necessary to ensure the bench remains stable and secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bench is wobbly or unstable. | Uneven surface; loose fasteners. | Adjust the leveling feet. Check and tighten all assembly bolts and nuts. Ensure the bench is on a flat surface. |
| Difficulty during assembly. | Parts misaligned; bolts not fully inserted. | Review assembly steps. Loosen all fasteners, realign parts, then retighten. Do not force components. |
| Surface discoloration or minor rust. | Exposure to harsh weather; lack of regular cleaning. | Clean with mild soap and water. For rust, gently remove with a fine-grade steel wool and apply rust-inhibiting paint. Store or cover during extreme weather. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Relaxdays |
| Model Number | 10036089 |
| Color | White-Green |
| Overall Dimensions (H x W x D) | 78 x 98 x 55.5 cm (approx. 30.7 x 38.6 x 21.9 inches) |
| Seat Surface (W x D) | 90.5 x 33 cm (approx. 35.6 x 13 inches) |
| Seat Height | 41 cm (approx. 16.1 inches) |
| Maximum Load Capacity | 200 kg (approx. 440 lbs) |
| Weight | 9.52 kg (approx. 21 lbs) |
| Material | Aluminum, Cast Iron, Plastic |
| Style | Antique |
Image: Detailed dimensions of the garden bench, including height, width, depth, and seat area.
Warranty Information
Specific warranty details for the Relaxdays Garden Bench Model 10036089 are not provided in the product information. Please refer to your purchase receipt or contact the retailer directly for warranty terms and conditions.
Customer Support
Contact information for customer support is not explicitly provided in the product details. For assistance with your Relaxdays Garden Bench, please refer to the contact details provided by your retailer or visit the official Relaxdays website.