1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Kindred RSL2020-1N Top Mount Stainless Steel Single Hole Kitchen Sink. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
This image displays the Kindred RSL2020-1N kitchen sink. It is a top-mount, single-basin sink made of stainless steel, featuring a single pre-drilled hole for a faucet and a standard drain opening at the bottom of the basin. The surface has a brushed finish.
2. Safety Information
- Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
- Ensure all water supply lines are turned off before beginning any plumbing work.
- If you are unsure about any step of the installation process, consult a qualified professional plumber or installer.
- Handle the sink with care to avoid scratches or damage to the finish.
3. Package Contents
Verify that all components are present before beginning installation:
- Kindred RSL2020-1N Kitchen Sink
- Installation Template
- Mounting Hardware (EZ Torque fasteners)
- Drain Assembly (Pop-Up type)
Note: Faucet and plumbing connections are sold separately and are not included.
4. Setup and Installation
The Kindred RSL2020-1N sink is designed for drop-in installation, suitable for most countertop materials. It features the EZ Torque simplified fastener system for secure mounting.
4.1. Pre-Installation Steps
- Review Dimensions: Ensure your cabinet size is a minimum of 24 inches to accommodate the sink.
- Prepare Countertop: Use the provided template to mark and cut the opening in your countertop. Ensure the cut is clean and precise.
- Clean Area: Clear the installation area of any debris or dust.
4.2. Sink Installation
- Apply Sealant: Apply a bead of plumber's putty or silicone sealant around the perimeter of the sink opening on the underside of the sink rim.
- Position Sink: Carefully lower the sink into the pre-cut countertop opening. Ensure it is centered and aligned correctly.
- Secure with EZ Torque Fasteners: From underneath the countertop, engage the EZ Torque fasteners. Tighten them evenly around the sink perimeter. The EZ Torque system allows for quick and secure locking of the sink to the countertop. Do not overtighten.
- Install Faucet and Drain: Install your chosen faucet into the pre-drilled hole. Connect the pop-up drain assembly to the sink basin according to its specific instructions, ensuring a watertight seal.
- Connect Plumbing: Connect the faucet to the water supply lines and the drain assembly to the P-trap and waste pipe.
- Test for Leaks: Turn on the water supply and check all connections for leaks. Tighten any leaking connections as necessary.
5. Operating Instructions
Your Kindred RSL2020-1N sink is designed for standard kitchen use. Simply turn on your faucet to use the sink for washing, rinsing, or filling. The single basin design provides ample space for various tasks.
- Ensure the drain stopper is open or closed as needed for water retention or drainage.
- Avoid placing extremely hot items directly onto the sink surface for prolonged periods, although stainless steel is highly heat resistant.
6. Maintenance and Care
Proper care will help maintain the appearance and extend the life of your stainless steel sink. The smooth stainless steel surface resists staining and helps prevent bacteria growth, and the gentle sloping corners make cleaning easy.
6.1. Daily Cleaning
- After each use, rinse the sink thoroughly with water to remove food particles and soap residue.
- Wipe the sink with a dry, soft cloth to prevent water spots and maintain the brushed finish.
- For general cleaning, use a mild dish soap and a soft sponge or cloth.
6.2. Avoiding Damage
- Do not use abrasive cleaners, steel wool, or scouring pads, as these can scratch the stainless steel surface.
- Avoid harsh chemicals such as bleach, ammonia, or drain cleaners, which can corrode the finish.
- Do not leave acidic foods (e.g., citrus, tomatoes) or corrosive substances in contact with the sink surface for extended periods.
- The sink is equipped with sound-reducing pads. Avoid damaging these pads during cleaning or installation.
7. Troubleshooting
This section addresses common issues you might encounter with your kitchen sink.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaking from connections | Loose plumbing connections or improper sealant application. | Ensure all connections are tightened securely. Reapply plumber's putty or sealant if necessary. |
| Slow drainage | Drain blockage or improper P-trap installation. | Clear any debris from the drain. Check P-trap for obstructions and correct installation. |
| Water spots or streaks on sink surface | Hard water deposits or improper drying. | Wipe the sink dry after each use. For stubborn spots, use a stainless steel cleaner and polish in the direction of the grain. |
If issues persist, contact customer support or a qualified professional.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Kindred |
| Model Number | RSL2020-1N |
| Material | Stainless Steel |
| Color | Stainless Steel |
| Finish Type | Brushed |
| Installation Type | Drop In (Top Mount) |
| Overall Dimensions (Left-to-right x Front-to-back x Bowl Depth) | 20.13 in x 20.56 in x 7 in |
| Interior Bowl Dimensions (Left-to-right x Front-to-back) | 18 in x 16 in |
| Minimum Cabinet Size | 24 inches |
| Hole Count | 1 (for faucet) |
| Drain Type | Pop-Up |
| Item Weight | 9 pounds |
| UPC | 039487167227 |
9. Warranty and Support
For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official Kindred website. For technical support or assistance with your Kindred RSL2020-1N sink, please contact Kindred customer service.
Contact information for Kindred customer service can typically be found on the manufacturer's website or on your purchase receipt.
