Hotel Spa 2649M

Hotel Spa AquaCare High Pressure 8-Mode Handheld Shower Head

Instruction Manual

1. Product Overview

The Hotel Spa AquaCare High Pressure 8-mode Handheld Shower Head is designed to enhance your showering experience with advanced features and superior water pressure. It includes innovative self-clean anti-clog nozzles and a built-in power wash function for versatile cleaning.

Hotel Spa AquaCare Shower Head with water streams
Figure 1: Hotel Spa AquaCare Shower Head in Satin Nickel finish, demonstrating powerful water streams.

Key Features:

2. Setup

The Hotel Spa AquaCare shower head is designed for quick and easy, tools-free installation, fitting any standard shower arm.

Included Components:

Installation Steps:

  1. Prepare Shower Arm: Remove your existing shower head. Clean any residue from the shower arm threads.
  2. Apply Teflon Tape: Wrap the provided Teflon tape clockwise around the threads of your shower arm.
  3. Install Overhead Bracket: Screw the angle-adjustable overhead bracket onto the shower arm. Hand-tighten firmly to ensure a secure, leak-free connection.
  4. Connect Hose: Attach one end of the 72-inch stainless steel hose to the overhead bracket and the other end to the handheld shower head. Ensure washers are properly seated in both connections. Hand-tighten.
  5. Mount Low-Reach Bracket: Choose a convenient location on your shower wall for the low-reach bracket. Ensure the surface is clean and dry. Remove the adhesive backing and firmly press the bracket onto the wall for several seconds. Allow adhesive to set for a few hours before use.
  6. Place Shower Head: Insert the handheld shower head into either the overhead bracket or the low-reach wall bracket for storage.
Diagram showing installation of Hotel Spa AquaCare Shower Head with two brackets and hose
Figure 2: Components and typical installation of the AquaCare shower system, including both mounting brackets.

3. Operating Instructions

Your AquaCare shower head offers 8 distinct spray settings for a customized showering experience, plus two powerful cleaning modes.

Changing Spray Settings:

Rotate the dial on the face of the shower head to cycle through the 8 available spray settings. These include:

Grid showing 8 different spray settings of the shower head
Figure 3: Visual representation of the 8 distinct spray settings available on the AquaCare shower head.

Using the Built-in Power Wash:

The unique built-in power wash feature allows for targeted cleaning. Simply flip the handle of the shower head to activate these modes:

Hotel Spa AquaCare Shower Head demonstrating the Wide Fan and Point Jet power wash modes
Figure 4: The AquaCare shower head's built-in power wash function, showing both Wide Fan and Point Jet sprays.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Hotel Spa AquaCare shower head.

Nozzle Care:

The AquaCare shower head features Self-Clean Anti-Clog Nozzles made with a special revolutionary material. This material works 24/7 on a molecular level to protect against contamination and degradation, significantly reducing the need for manual cleaning of the nozzles. Unlike traditional shower heads, these nozzles are designed to remain clean and clog-free for years.

Close-up of AquaCare shower head nozzles with explanation of self-clean technology
Figure 5: Detail of the self-clean anti-clog nozzles and their protective technology.

General Cleaning:

To clean the exterior of the shower head and hose, use a soft cloth with mild soap and water. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the satin nickel finish.

5. Troubleshooting

If you encounter any issues with your AquaCare shower head, refer to the common problems and solutions below.

ProblemPossible CauseSolution
Low Water PressureFlow restrictor installed; mineral buildup in shower arm or hose.Ensure the flow restrictor (if present and removable per local regulations) has been removed during installation. Check and clean the shower arm and hose for any debris or mineral deposits.
Leaking ConnectionsLoose connections; missing or improperly seated washers; insufficient Teflon tape.Ensure all connections are hand-tightened securely. Verify that washers are correctly placed in each connection point. Reapply Teflon tape if necessary, ensuring a tight seal.
Nozzles Not Spraying EvenlyMinor debris or mineral residue on nozzle surface.While nozzles are anti-clog, a quick wipe with a finger or soft cloth can dislodge any surface residue.

6. Specifications

7. Warranty and Support

Warranty Information:

The Hotel Spa AquaCare High Pressure 8-mode Handheld Shower Head comes with a Limited Lifetime Warranty. This warranty covers defects in material and workmanship under normal use and service.

Customer Support:

For warranty claims, technical assistance, or any questions regarding your product, please contact the manufacturer, Interlink Products. Refer to the original packaging or the official Hotel Spa website for the most current contact information.

Note: Please retain your proof of purchase for any warranty claims.