AXA 606-Ebike 6-48 Volt 15 Lux Black

Introduction

Thank you for choosing the AXA 606-Ebike front light. This light is designed for e-bikes operating on a 6-48 Volt system, providing 15 Lux of illumination for enhanced visibility and safety during your rides. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.

Important Safety Information

• Always ensure the light is securely mounted before riding.
• Do not look directly into the light beam when it is active, as it may cause temporary vision impairment.
• Ensure the e-bike's electrical system voltage is within the specified 6-48 Volt range to prevent damage to the light.
• Keep the light clean and free from obstructions to maintain optimal brightness.
• While the light is water resistant (IPX6), avoid submerging it in water.

Package Contents

• AXA 606-Ebike Front Light
• Mounting Bracket (Handlebar Mount)
• Mounting Hardware (Screws, Nuts, Washers)
• Instruction Manual

Setup and Installation

The AXA 606-Ebike light is designed for easy handlebar mounting. Follow these steps for proper installation:

Image: The AXA 606-Ebike front light, featuring a sleek black casing and a clear, multi-faceted lens. A silver mounting bracket is visible at the base, designed for handlebar attachment.

1. Choose Mounting Location: Select a suitable position on your e-bike's handlebar that provides clear visibility and does not obstruct other controls.
2. Attach Mounting Bracket: Secure the provided handlebar mounting bracket to your chosen location using the appropriate screws and nuts. Ensure it is tightened sufficiently to prevent movement.
3. Mount the Light: Slide the AXA 606-Ebike light onto the mounting bracket until it clicks securely into place.
4. Connect Electrical Wires: Connect the light's power wires to your e-bike's 6-48 Volt electrical system. Refer to your e-bike's manual for specific wiring instructions. Ensure correct polarity (positive to positive, negative to negative) to avoid damage.
5. Adjust Angle: Once mounted and connected, adjust the angle of the light to illuminate the path ahead effectively without blinding oncoming traffic.

Operating Instructions

The AXA 606-Ebike light is designed for straightforward operation, typically controlled via your e-bike's integrated lighting system.

• Power On/Off: The light will typically turn on and off with your e-bike's main power switch or dedicated light switch. Consult your e-bike's user manual for specific controls.
• Brightness Setting: This model features a single brightness setting of 15 Lumen, optimized for consistent illumination.

Care and Maintenance

Proper care will extend the life and performance of your AXA 606-Ebike light.

• Cleaning: Wipe the light's casing and lens with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic.
• Inspection: Periodically check the mounting bracket and electrical connections for tightness and signs of wear.
• Storage: If storing your e-bike for an extended period, ensure the light is clean and stored in a dry environment.

Troubleshooting

If you encounter issues with your AXA 606-Ebike light, refer to the table below for common problems and solutions.

Technical Specifications

Warranty and Customer Support

AXA products are manufactured to high quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or contact your retailer. In general, products are covered against manufacturing defects for a specified period.

Please note that this product is eligible for a 30-day return policy from the date of purchase, as per standard retail terms.

For technical support, warranty claims, or further assistance, please contact your authorized AXA dealer or the retailer from whom you purchased the product. When contacting support, please have your product model number (93961495SC) and purchase date ready.