Yesido YSP-06

Yesido YSP-06 Bluetooth Sports In-Ear Headphones User Manual

Model: YSP-06 | Brand: Yesido

Introduction

Thank you for choosing the Yesido YSP-06 Bluetooth Sports In-Ear Headphones. This manual provides essential information for the safe and efficient use of your new headphones. Please read these instructions carefully before use and retain them for future reference.

Package Contents

Ensure all items are present in the package:

  • Yesido YSP-06 Bluetooth Sports In-Ear Headphones
  • USB Charging Cable
  • Multiple Pairs of Ear Cushions (various sizes)
  • User Manual (this document)
USB charging cable and three pairs of black ear tips

Image: USB charging cable and three pairs of black ear tips, indicating included accessories.

Product Overview

The Yesido YSP-06 headphones feature a lightweight, in-ear design with a neckband for secure wear during sports and activities. The control module is integrated into the neckband for easy access.

Close-up of the black Yesido YSP-06 in-ear headphones

Image: A close-up view of the black in-ear headphones, highlighting the earbud design and cable.

Front view of the Yesido YSP-06 headphones retail packaging

Image: The front of the retail packaging for the Yesido YSP-06 headphones, showing the product and key features.

Setup

1. Charging the Headphones

  1. Connect the USB charging cable to the charging port on the headphone's control module.
  2. Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer's USB port.
  3. The indicator light will show the charging status. A full charge takes approximately 2 hours.
  4. Once fully charged, disconnect the charging cable.

2. Pairing with a Bluetooth Device

  1. Ensure the headphones are turned off.
  2. Press and hold the multi-function button (usually the power button) until the indicator light flashes red and blue alternately, indicating pairing mode.
  3. On your device (e.g., smartphone), enable Bluetooth and search for available devices.
  4. Select "YSP-06" from the list of found devices.
  5. Once paired, the indicator light will typically turn solid blue or flash blue slowly.

Operating Instructions

Power On/Off

  • Power On: Press and hold the multi-function button for approximately 3 seconds until the indicator light flashes blue.
  • Power Off: Press and hold the multi-function button for approximately 5 seconds until the indicator light flashes red and then turns off.

Music Playback

  • Play/Pause: Press the multi-function button once.
  • Next Track: Press and hold the Volume Up (+) button.
  • Previous Track: Press and hold the Volume Down (-) button.
  • Volume Up: Short press the Volume Up (+) button.
  • Volume Down: Short press the Volume Down (-) button.

Call Management

  • Answer/End Call: Press the multi-function button once.
  • Reject Call: Press and hold the multi-function button for approximately 2 seconds.
  • Redial Last Number: Double-press the multi-function button.

Video: An overview of the Yesido YSP-06 Bluetooth Sports In-Ear Headphones, demonstrating its design and features. This video is provided by the seller.

Maintenance

  • Keep the headphones dry. Do not expose them to moisture or extreme temperatures.
  • Clean the earbuds and charging port regularly with a soft, dry cloth to prevent dust and debris buildup.
  • Avoid using abrasive cleaners or solvents.
  • Store the headphones in a cool, dry place when not in use.

Troubleshooting

Problem Solution
Headphones do not power on. Ensure the headphones are fully charged. Connect to a power source and charge for at least 30 minutes.
Cannot pair with device.
  • Ensure headphones are in pairing mode (flashing red and blue).
  • Make sure Bluetooth is enabled on your device.
  • Move headphones closer to your device (within 10 meters).
  • Forget "YSP-06" from your device's Bluetooth list and try pairing again.
No sound or low volume.
  • Adjust the volume on both the headphones and your connected device.
  • Ensure the headphones are properly connected to your device.
  • Check if the ear tips are correctly seated in your ears.
Intermittent connection.
  • Ensure there are no obstructions between the headphones and your device.
  • Move away from other wireless devices that may cause interference.
  • Keep within the 10-meter operating range.

Specifications

Feature Detail
BrandYesido
Model NameYSP-06
Model Number (ASIN)B08WJMBJSB
Connectivity TechnologyBluetooth
Wireless Communication TechnologyBluetooth
Headphone Form FactorIn-Ear
Ear PlacementOver-Ear (Note: Refers to the neckband style, earbuds are in-ear)
Noise ControlNone
Control TypeVolume Control
Special FeaturesLightweight
MaterialPlastic
Compatible DevicesCellphones
Cable FeatureWithout Cable
Water Resistance LevelNot Water Resistant
Included ComponentsEar cushions
Battery Capacity110mAh
Complete Charge TimeAbout 2 hours
Music Playback TimeAbout 8 hours
Talking TimeAbout 8 hours
Standby TimeAbout 500 hours
Operating RangeAbout 10 meters
Sensitivity96+/-3DB
Working FrequencyISM(2.401-2.482GHz)
Speaker TypeØ8mm, 16Ω/2.5mW
Product Weight140 grams
Dimensions (L x W x H)23 x 15.8 x 2.9 cm

Note: Some specifications are derived from product packaging and may vary slightly.

Warranty and Support

Please refer to the product packaging for specific warranty information. The product specifications state "No Warranty," however, the packaging image indicates a "24 Months Warranty." For accurate details, consult the physical product packaging or contact the manufacturer directly.

Contact Information:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.