Curtis MIS165PEP Pepsi Mini Beverage Cooler User Manual

1. Important Safety Information

Please read all instructions carefully before using this appliance to ensure safe operation and to prevent damage. Keep this manual for future reference.

• Electrical Safety: Ensure the cooler is connected to a properly grounded electrical outlet. Do not use extension cords or ungrounded adapters.
• Ventilation: Allow adequate space around the cooler for proper ventilation (at least 5 inches on sides and back) to prevent overheating.
• Flammable Materials: Do not store explosive substances or flammable materials inside the appliance.
• Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Cleaning: Always unplug the cooler before cleaning or performing any maintenance.

2. Product Overview

The Curtis MIS165PEP Pepsi Mini Beverage Cooler is a compact refrigeration unit designed for cooling beverages. It features a transparent glass door, adjustable vinyl-coated shelves, and an adjustable thermostat for temperature control. This model has a capacity of 1.8 cubic feet.

Figure 2.1: Front view of the Curtis MIS165PEP Pepsi Mini Beverage Cooler, showcasing its design and capacity for beverages.

Key Features:

• 1.8 cu. ft. capacity
• Glass door with silver trim
• Adjustable thermostat control
• Two adjustable, full-width, vinyl-coated shelves
• Reversible door hinge
• Compact, flat-back design

3. Setup and Installation

3.1 Unpacking

1. Carefully remove all packaging materials, including foam and adhesive tape.
2. Inspect the cooler for any shipping damage. If damage is found, do not plug in the unit and contact customer support.
3. Clean the interior and exterior of the cooler with a soft cloth and mild detergent before use.

3.2 Placement

• Place the cooler on a flat, stable surface strong enough to support the unit when fully loaded.
• Ensure there is at least 5 inches (12.7 cm) of space on the sides, back, and top of the cooler for proper air circulation.
• Avoid placing the cooler in direct sunlight or near heat sources (e.g., ovens, radiators) as this can affect cooling performance and energy efficiency.
• The compact, flat-back design allows for versatile placement in various settings such as home, office, or dorm rooms.

3.3 Electrical Connection

• Allow the cooler to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle.
• Plug the cooler into a dedicated, grounded 110V AC outlet. Do not share the outlet with other high-power appliances.

Figure 3.1: Front view of the cooler with the door closed, illustrating its compact form factor.

4. Operating Instructions

4.1 Temperature Control

• The cooler features an adjustable thermostat control dial, typically located inside the unit or on the back.
• Turn the knob to adjust the temperature setting. Settings usually range from 'Cool' to 'Coldest'.
• Start with a medium setting and adjust as needed to achieve your desired beverage temperature. It may take several hours for the temperature to stabilize after adjustment.

4.2 Loading Beverages

• Arrange beverages to allow for proper air circulation around items. Overloading can impede cooling performance.
• The two adjustable shelves can be repositioned to accommodate different sizes of cans or bottles.

Figure 4.1: The cooler with its door open, revealing the interior layout and adjustable shelves for beverage storage.

4.3 Reversible Door

• The door hinge is reversible, allowing you to change the door swing direction to suit your space. Refer to the detailed instructions in the separate door reversal guide (if provided) or contact customer support for assistance.

5. Maintenance and Care

5.1 Cleaning

1. Always unplug the cooler before cleaning.
2. Clean the interior with a soft cloth, warm water, and a mild, non-abrasive detergent. Rinse thoroughly and dry completely.
3. Wipe the exterior with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
4. Clean the door gasket regularly to ensure a tight seal.

5.2 Defrosting

• This cooler features manual defrost. Frost buildup on the interior cooling plate is normal.
• When frost accumulation reaches approximately 1/4 inch (6 mm) thick, unplug the unit and remove all contents.
• Allow the frost to melt naturally. Do not use sharp objects or heating devices to remove frost, as this can damage the cooling system.
• Once defrosted, clean and dry the interior thoroughly before plugging the unit back in.

5.3 Power Outage

• In case of a power outage, keep the door closed to maintain the internal temperature for as long as possible.
• Avoid opening the door unnecessarily.

6. Troubleshooting Guide

Before contacting customer service, please review the following common issues and solutions:

7. Product Specifications

8. Warranty and Support

This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and limitations. Keep your proof of purchase for warranty claims.

Customer Support:

For technical assistance, troubleshooting beyond this guide, or warranty inquiries, please contact Curtis customer support. Contact information can typically be found on the product packaging, the warranty card, or the official Curtis website.

When contacting support, please have your model number (MIS165PEP) and purchase date readily available.