COSTWAY 3-Piece Bar Table Set Instruction Manual

1. Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Always assemble according to the provided instructions.
• Be cautious when using the swivel stools to prevent injury.
• Do not exceed the weight capacity of the table and stools to avoid tip-over risks.
• Ensure all connections are securely tightened before use. Periodically check and re-tighten fasteners as needed.
• Keep small parts away from children during assembly.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact COSTWAY customer service.

• 1 x Round Bar Table
• 2 x Bar Stools
• 1 x Instruction Manual
• Hardware Pack (screws, bolts, Allen wrench, etc.)

3. Assembly Instructions

Assembly is required. Follow the steps carefully to ensure proper and safe construction. It is recommended to assemble on a soft, clean surface to prevent scratches.

3.1 Bar Table Assembly

1. Attach the table column to the table base using the provided hardware. Ensure a secure connection.
2. Carefully place the tabletop onto the assembled column and base. Secure it with the appropriate screws from underneath.
3. Verify all connections are tight and the table is stable.

3.2 Bar Stool Assembly

1. Insert the gas lift cylinder into the center hole of the stool base.
2. Slide the footrest ring over the gas lift cylinder.
3. Attach the stool seat to the top of the gas lift cylinder, ensuring it clicks into place.
4. Verify all connections are secure and the stool operates smoothly.

4. Operating Instructions

4.1 Stool Height Adjustment

To adjust the stool height, locate the metal lift lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up; the seat will rise automatically. Release the lever at the desired height.

4.2 Stool Swivel Function

The bar stools feature a 360-degree swivel design. Simply rotate the seat in any direction for convenience and flexibility.

5. Maintenance

Proper care will extend the life and appearance of your bar table set.

• Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish or upholstery.
• Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary.
• Protection: Avoid placing hot items directly on the tabletop. Use coasters or placemats to protect the surface.
• Placement: Keep the furniture away from direct sunlight and extreme temperature changes to prevent material degradation.

6. Troubleshooting

If you encounter any issues, refer to the following common solutions:

• Wobbling Table/Stool: Ensure all assembly screws and bolts are fully tightened. Check that the floor surface is even.
• Stool Not Adjusting Height: Verify the gas lift lever is fully engaged. Ensure there are no obstructions in the gas lift mechanism. If the issue persists, the gas lift cylinder may need replacement.
• Scratches on Floor: The table and stools are equipped with non-scratch rubber rings under the base. Ensure these are intact and properly positioned.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact COSTWAY customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: COSTWAY