PhoneSoap PSBASv1W

PhoneSoap Basic UV Cell Phone Sanitizer User Manual

Model: PSBASv1W

Introduction

The PhoneSoap Basic is a UV-C light sanitizing device designed to disinfect the surfaces of your cell phone and other small, high-touch items. This device utilizes germicidal UV-C light to achieve disinfection. It is designed for ease of use and integrates into daily hygiene routines.

PhoneSoap Basic UV Sanitizer with lid open, showing the interior and UV-C bulb.

Image: PhoneSoap Basic UV Sanitizer with its lid open, revealing the interior chamber and the UV-C bulb. This view demonstrates the device's design for placing items inside for sanitization.

Safety Information

Please read all safety instructions before using the PhoneSoap Basic. UV-C light can be damaging to human skin and eyes. Do not attempt to open the device or expose yourself to the UV-C light directly. Use the device only as directed. Keep out of reach of children.

  • Do not tamper with the device.
  • Ensure the lid is fully closed during operation.
  • Store and dispose of the device according to local laws and statutes.

Package Contents

  • PhoneSoap Basic UV Cell Phone Sanitizer
  • Power Cord
  • User Manual (this document)

Setup

  1. Unpack: Carefully remove the PhoneSoap Basic and its accessories from the packaging.
  2. Placement: Place the device on a stable, flat surface near a power outlet.
  3. Connect Power: Plug the provided power cord into the power port on the back of the PhoneSoap Basic, then plug the other end into a standard electrical outlet.

Operating Instructions

The PhoneSoap Basic is designed for simple, automatic operation.

  1. Open Lid: Lift the lid of the PhoneSoap Basic.
  2. Place Item: Carefully place your smartphone or other small item (e.g., keys, wallet, headphones, jewelry, glasses) into the sanitizing chamber. Ensure the item fits completely within the chamber.
  3. A hand placing a smartphone into the open PhoneSoap Basic UV Sanitizer.

    Image: A hand carefully placing a smartphone into the open sanitizing chamber of the PhoneSoap Basic. This illustrates the correct method for inserting items.

    The chamber accommodates items up to 3.74 inches wide by 6.8 inches long.

    The PhoneSoap Basic UV Sanitizer shown with various small items like a smartphone, earbuds, keys, and a watch, demonstrating its capacity.

    Image: The PhoneSoap Basic UV Sanitizer displayed with a variety of small personal items, including a smartphone, earbuds, keys, and a watch, illustrating the range of objects that can be sanitized.

  4. Close Lid: Close the lid completely. The sanitization cycle will begin automatically. A blue indicator light will illuminate, indicating the UV-C bulbs are active.
  5. Sanitization Cycle: The device will perform a 10-minute disinfection cycle. The unique design ensures 360-degree UV-C light exposure to the item's surfaces.
  6. Diagram showing 360-degree UV-C disinfection and a 10-minute cycle time.

    Image: A diagram illustrating the 360-degree UV-C disinfection process within the PhoneSoap Basic, highlighting the comprehensive coverage and the 10-minute disinfection cycle duration.

  7. Completion: Once the 10-minute cycle is complete, the indicator light will turn off. You can then open the lid and remove your disinfected item.

The device can also charge your phone while sanitizing if a charging cable is connected to your phone and routed through the designated port on the device.

Maintenance

The PhoneSoap Basic requires minimal maintenance. The UV-C bulbs are designed for long-term use. If a bulb burns out, it may be covered under warranty.

  • Cleaning: To clean the exterior of the device, wipe with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
  • Bulb Replacement: UV-C bulbs are not user-replaceable. If you suspect a bulb has failed, please contact PhoneSoap customer support for assistance.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on / Indicator light does not illuminate.
  • Power cord not properly connected.
  • Power outlet is not active.
  • Lid is not fully closed.
  • Ensure power cord is securely plugged into the device and the wall outlet.
  • Test the outlet with another device.
  • Close the lid completely until it clicks into place.
Sanitization cycle seems ineffective.
  • Item too large for chamber.
  • Bulbs may be burnt out.
  • Ensure the item fits entirely within the chamber without obstructing the lid.
  • Contact PhoneSoap support if bulbs appear non-functional.

Specifications

  • Model Number: PSBASv1W
  • Product Dimensions: 8.11 x 5 x 1.77 inches
  • Item Weight: 16 ounces
  • Color: Basic - White
  • Special Features: Antibacterial UV-C Disinfection
  • Disinfection Time: 10 minutes
  • Manufacturer: PhoneSoap
  • Compatibility: Fits smartphones up to 3.74 x 6.8 inches, and other small items.

Warranty and Support

PhoneSoap offers a limited warranty on its products. A lifetime warranty is provided for burnt-out UV-C bulbs. For warranty claims, technical support, or any questions regarding your PhoneSoap Basic, please contact PhoneSoap customer support.

Manufacturer: PhoneSoap
Website: www.phonesoap.com (Please refer to the official website for the most current support contact information and warranty details.)

© 2025 PhoneSoap. All rights reserved.

Related Documents - PSBASv1W

Preview PhoneSoap Med Pro: Setup, Features, and Safety Guide
Learn how to set up and use your PhoneSoap Med Pro mobile device disinfection station. Includes features, safety information, FCC compliance, and support details.
Preview Pride@Boeing Kitchen & Home Product Catalog
Explore a curated selection of premium kitchen and home goods from Pride@Boeing, featuring brands like DeWalt, Orrefors, Wusthof, SMEG, Ralph Lauren, Vitamix, Viking, and more. Discover high-quality tools, elegant decor, and innovative appliances designed to enhance your lifestyle.