Product Overview
This document provides essential information for the safe and effective use of your SapplySource AC Adapter, designed specifically for the VYBE Pro LV9 Percussive Massager Massage Gun.
Figure 1: SapplySource AC Adapter with its power cord neatly coiled and secured.
The SapplySource AC Adapter is a replacement power supply cord for the VYBE Pro LV9 Percussive Massager. It ensures your device receives the correct voltage and current for optimal performance and charging.
Important Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the DC output and tip size of the AC adapter are compatible with your device before connecting.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- If using the adapter for extended periods, ensure adequate ventilation and avoid placing it on heat-sensitive surfaces or skin.
- This adapter is designed with multiple safety features including protection against incorrect voltage, short circuits, and internal overheating.
- Do not attempt to disassemble or modify the adapter.
- Keep out of reach of children.
Figure 2: Built-in safety electronics of the SapplySource AC Adapter, providing comprehensive protection.
Setup
- Verify Compatibility: Before connecting, confirm that the adapter's DC output voltage and connector tip size match the requirements of your VYBE Pro LV9 Percussive Massager. Refer to your massager's manual for specifications.
- Connect to Device: Insert the DC output plug of the SapplySource AC Adapter firmly into the power input port of your VYBE Pro LV9 Percussive Massager.
- Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard 100-240V AC wall outlet.
The adapter is designed for immediate use upon proper connection.
Operating Instructions
Once connected, the SapplySource AC Adapter provides continuous power to your VYBE Pro LV9 Percussive Massager or charges its internal battery, depending on the massager's design.
- Ensure the adapter is securely plugged into both the device and the wall outlet during operation or charging.
- Monitor the device's charging indicator (if applicable) to confirm charging status.
- Disconnect the adapter from the wall outlet when not in use for extended periods.
Maintenance
Proper maintenance ensures the longevity and safe operation of your AC adapter.
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Cable Care: Regularly inspect the power cord for any signs of damage, such as fraying, cuts, or kinks. If damage is observed, discontinue use immediately and replace the adapter.
Figure 3: The compact design of the SapplySource AC Adapter, with a cable length of approximately 4 feet.
Troubleshooting
If you encounter issues with your SapplySource AC Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not providing power. | Not properly plugged in; faulty outlet; incompatible device. | Ensure secure connections at both ends. Test the outlet with another device. Verify adapter compatibility with your massager. |
| Device not charging. | Adapter not fully connected; device battery issue; adapter fault. | Check all connections. Try charging another compatible device if possible. If issues persist, contact support. |
| Adapter feels hot. | Normal operation (slight warmth); poor ventilation; overload. | A slight warmth is normal. Ensure adequate ventilation around the adapter. Disconnect if excessively hot and contact support. |
If troubleshooting steps do not resolve the issue, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | SapplySource |
| Input Voltage Range | 100-240V AC |
| Input Frequency | 50-60Hz |
| Compatibility | VYBE Pro LV9 Percussive Massager Massage Gun |
| Safety Features | Over Charge Protection, Over Voltage Protection, Short-circuit Protection, Over Current Protection, Over Temp Protection |
| Material | Plastic, Metal |
| Cable Length | Approximately 4 feet |
| Certifications | CE, FCC |
Warranty and Support
SapplySource products are manufactured with high-quality materials and undergo rigorous testing.
- Warranty: This product comes with a 24-month warranty from the date of purchase, covering manufacturing defects.
- Customer Support: If you have any questions, concerns, or require assistance, please do not hesitate to contact SapplySource customer service.
- Contact Information: Please refer to the packaging or the retailer's website for specific contact details.