METAL MACHINES Gorilla Rampage Garage Track Set Instruction Manual

Introduction

Welcome to the world of METAL MACHINES! This instruction manual provides essential information for the assembly, operation, and maintenance of your new Gorilla Rampage Garage Track Set. Prepare for action-loaded fun with a multi-level garage, a massive gorilla hand trap, and various interactive features designed for endless play. Please read this manual carefully before use to ensure safe and optimal enjoyment of the playset.

Important Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Always supervise children during play.
• Ensure all parts are securely connected before play to prevent detachment.
• Keep small parts away from young children to avoid choking hazards.
• Do not modify the playset in any way, as this may compromise its safety and functionality.

What's in the Box

Before assembly, please verify that all components listed below are present:

• 1x Metal Machines Gorilla
• 1x Elevator mechanism
• 1x Helicopter accessory
• 1x Repair station
• 1x Metal Machines Car
• 1x 3m / 10ft of track pieces
• 2x Floor levels for the garage
• 1x Instruction Manual (this document)

Image: Overview of the Metal Machines Gorilla Rampage Playset components.

Setup Instructions

Follow these steps to assemble your Gorilla Rampage Garage Track Set:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Refer to the 'What's in the Box' section to ensure all pieces are present.
2. Assemble Base: Connect the main base pieces of the garage. Ensure they click securely into place.
3. Install Elevator Tower: Attach the multi-level elevator tower to the designated slot on the base. Make sure the elevator mechanism moves freely.
4. Attach Gorilla Head and Hand: Secure the Gorilla head to the main structure, ensuring the track piece through its mouth is correctly aligned. Attach the movable gorilla hand to its pivot point.
5. Connect Garage Levels: Place the two garage floor levels onto the support pillars, connecting them to the elevator tower and other track sections.
6. Assemble Track Sections: Connect the various track pieces, including the long 3m/10ft sections, to create the ramps and loops. Ensure all connections are firm.
7. Add Accessories: Place the repair stations, helicopter platform, and other small accessories in their respective locations on the playset.
8. Apply Stickers: Use the provided sticker sheet to add details and signage to the playset, such as parking spots and 'Metal Machines' logos.

Image: An overview of the assembled Gorilla Rampage Garage Track Set, highlighting key features like the working elevator, 20-car storage, giant gorilla, helicopter, and massive track.

Operating the Playset

The Gorilla Rampage Garage Track Set offers multiple interactive play scenarios:

• Gorilla Hand Trap: Drive your Metal Machines car over the designated section near the gorilla's hand. Watch out as the massive gorilla hand may grab your car, adding an exciting challenge to the race.
• Gorilla Mouth Ramp: Speed through the monstrous gorilla mouth, which acts as a thrilling ramp or trap depending on the play scenario.
• Multi-Level Garage & Elevator: Utilize the manually operated 2-car elevator to transport your Metal Machines between the two garage levels. The garage features parking spots for over 20 cars, allowing for extensive vehicle storage and display.
• Auto Repair Stations: Use the two integrated auto repair stations on the first floor to simulate vehicle maintenance and preparation before races.
• Helicopter Rescue: The helicopter platform houses a rescue helicopter that can transport cars, providing an aerial escape route or strategic repositioning during play.
• Interchangeable Tracks: Most track and playset pieces are interchangeable, and track directions can be changed, offering infinite combination possibilities for customized racing layouts.
• Underground Tunnel: If the action gets too intense, Metal Machines can drive through the underground tunnel to escape the beast or take a shortcut.

Image: Two children enthusiastically playing with the multi-level Gorilla Rampage Garage Track Set, showcasing its interactive features.

Image: A close-up view of the gorilla's open mouth, which serves as a track entrance or trap, with a Metal Machines car speeding towards it.

Image: A Metal Machines car being caught by the gorilla's movable hand on the track, demonstrating the playset's interactive trap feature.

Image: A child placing a Metal Machines car onto the helicopter's cargo bay on the playset's helicopter platform, ready for transport.

Maintenance

• Cleaning: Wipe the playset surfaces with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, store the playset in a dry, cool place away from direct sunlight to prevent material degradation.
• Inspection: Periodically check all connections and moving parts for wear or damage. Replace any broken or worn parts immediately to ensure continued safe play.

Troubleshooting

• Cars getting stuck: Ensure all track pieces are fully connected and aligned. Check for any debris on the track or in the car wheels.
• Elevator not moving smoothly: Verify that no objects are obstructing the elevator's path. Ensure the manual crank is operated gently and consistently.
• Track pieces detaching: Press firmly on all connection points until you hear a click to ensure a secure fit. Avoid lifting the playset by individual track sections.

Product Specifications

Image: The Metal Machines Gorilla Rampage Playset with indicated dimensions of 69 inches (width) and 18 inches (height).

Warranty and Support

For any questions, concerns, or support regarding your METAL MACHINES Gorilla Rampage Garage Track Set, please contact ZURU customer service. Specific warranty details may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

You can visit the official METAL MACHINES store for more information and products: METAL MACHINES Store