Bandai Hobby Real Grade 1/144 Wing Gundam Zero EW Model Kit Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for the assembly and care of your Bandai Hobby Real Grade 1/144 Wing Gundam Zero from "Endless Waltz." This highly detailed model kit features a sophisticated "Zero Frame" internal structure, allowing for extensive posability and dynamic display options. The magnificent wings include unique joints for posable feathers, enhancing the model's expressive capabilities.

The kit includes parts molded in pale grey, dark grey, navy blue, red, clear, and yellow plastic, eliminating the need for paint for a complete look, though painting can be applied for further customization. Decals are also provided to add intricate markings and details. The primary assembly instructions are fully-illustrated in Japanese, designed for ease of understanding through visual steps.

Figure 1.1: Fully assembled Wing Gundam Zero EW model kit.

2. Safety Information

• This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
• Adult supervision is recommended during assembly, especially for younger builders (recommended age 15+).
• Exercise caution when using hobby knives or nippers for cutting parts from runners. Always cut away from your body.
• Keep plastic bags and packaging materials away from children to prevent suffocation.
• Avoid placing the assembled model in direct sunlight or near heat sources, as this may cause deformation or discoloration.

3. Assembly

The assembly process for the Real Grade Wing Gundam Zero EW involves carefully cutting plastic parts from runners and fitting them together. The kit utilizes an advanced "Zero Frame" internal structure, which forms the skeleton of the model, providing stability and articulation.

3.1. Tools Required

• Hobby Nippers: For cleanly cutting parts from the runners.
• Hobby Knife (optional): For trimming excess plastic or nubs.
• Tweezers (optional): For applying small decals.

3.2. Step-by-Step Process

1. Review Instructions: Carefully examine the included Japanese instruction manual. Although in Japanese, the diagrams are highly detailed and visually guide you through each step.
2. Part Identification: Identify the runners and individual parts as indicated in the manual. Each runner is labeled with a letter (e.g., A, B, C) and each part with a number (e.g., A1, B2).
3. Cutting Parts: Use hobby nippers to carefully cut the required parts from their respective runners. Cut slightly away from the part to avoid stress marks, then trim any remaining nubs with a hobby knife if desired.
4. Frame Assembly: Begin by assembling the internal "Zero Frame" as shown in the initial sections of the manual. This frame provides the core articulation for the model.
5. Armor and Weapon Assembly: Attach the various armor pieces, including the distinctive wings, to the frame. Assemble the Twin Buster Rifles and Beam Sabers according to the instructions.
6. Decal Application: Once the model is assembled, apply the included realistic decals to enhance its appearance. Refer to the manual for recommended decal placement.

Figure 3.1: Front view of the assembled model, showcasing its intricate details.

Figure 3.2: Rear view highlighting the detailed wing structure.

4. Operating and Posing

The Real Grade Wing Gundam Zero EW is designed for high articulation, allowing for a wide range of dynamic poses. Its "Zero Frame" and multi-jointed wings provide exceptional flexibility.

• Articulation: Gently manipulate the joints in the arms, legs, torso, and head to achieve desired poses. The shoulders feature Gatling guns that can be opened.
• Wing Movement: The individual feathers on the wings are posable. Carefully adjust them to replicate various flight or attack configurations.
• Twin Buster Rifle: The two included Twin Buster Rifles can be held separately or combined into a single, more powerful weapon. Ensure a secure fit in the model's hands.
• Beam Sabers: The Beam Sabers can be stored on the back of the wings and removed for display.

Figure 4.1: Model posed with the Twin Buster Rifle.

Figure 4.2: Model in a flying pose, demonstrating wing articulation.

5. Maintenance

• Cleaning: Dust the model regularly with a soft brush or a can of compressed air to prevent dust buildup in crevices.
• Handling: Handle the model gently to avoid accidental detachment of parts or damage to delicate joints.
• Storage: Store the model in a stable, dust-free environment away from direct sunlight, extreme temperatures, and high humidity.

6. Troubleshooting

• Loose Joints: If a joint becomes too loose, a small amount of clear nail polish or hobby-grade clear coat can be applied to the peg and allowed to dry before reassembling to create a tighter fit.
• Parts Not Fitting: Double-check the instruction manual to ensure the correct parts are being used and oriented properly. Sometimes, minor excess plastic (nubs) from the runners can prevent a snug fit; carefully trim these with a hobby knife.
• Decals Not Sticking: Ensure the surface is clean and dry before applying decals. For stubborn decals, a decal setting solution can be used.

7. Specifications

8. Warranty and Support

Warranty: This product does not come with a manufacturer's warranty.

Customer Support: For any questions regarding assembly, missing parts, or general inquiries, please visit the official BANDAI SPIRITS Store or contact their customer service directly.