Introduction
The Bandai CSM Altering is a highly detailed replica of the transformation belt used by Shouichi Tsugami in the Kamen Rider Agito series. This Complete Selection Modification (CSM) series item features advanced sound effects, LED lighting, and infrared sensors for an immersive transformation experience, faithfully reproducing the on-screen appearance and functionality.
Safety Information
WARNING: CHOKING HAZARD - Small Parts. This product contains small parts and is not suitable for children under 3 years of age. The manufacturer recommends this product for ages 12 years and up. Adult supervision is recommended during assembly and use.
Always ensure batteries are installed correctly and disposed of properly. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product will not be used for an extended period.
Package Contents
- Bandai CSM Altering Kamen Rider Transformation Belt Main Unit
- Belt Straps (Left and Right)
- Instruction Manual
Setup
Battery Installation
The CSM Altering requires 6 AAA batteries (not included). Locate the battery compartment on the back of the main unit. Use a small Phillips head screwdriver to open the compartment cover. Insert 6 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Securely close the compartment cover with the screw.
Assembly
Attach the left and right belt straps to the main Altering unit. Align the connectors on the belt straps with the corresponding slots on the main unit and push firmly until they click securely into place. Ensure both sides are firmly attached before wearing.
Image: Side view of the assembled CSM Altering belt.
Operating Instructions
Power On/Off
Locate the power switch, typically on the side or back of the main unit. Slide it to the 'ON' position to power on the device. Slide it to 'OFF' to conserve battery life when not in use.
Transformation Sequence
The CSM Altering features two infrared sensors on the waist. To initiate transformation, perform the designated transformation pose. The sensors will detect your movement, activating the belt's appearance sound and transformation standby sound. Press the buttons located on both sides of the waist to complete the transformation and activate the full transformation sound effect.
Image: The CSM Altering belt in its default state.
Form Changes and LED Effects
The belt incorporates 12 LEDs designed to reproduce the emission colors of all Kamen Rider Agito forms. Specific button combinations or actions will trigger different form changes, altering the LED colors and activating corresponding sound effects. Refer to the detailed instructions for specific button sequences to activate each form.
Image: The CSM Altering belt displaying a form with yellow, red, and blue lights.
Image: The CSM Altering belt displaying a form with a purple central core.
Image: Detailed view of the purple central core, indicating a specific form.
Sound Modes
The CSM Altering features a greatly evolved audio system, reproducing various sounds from the Kamen Rider Agito series. This includes transformation sounds, form change sounds, weapon appearance sounds, and special move sounds. Consult the included detailed instructions for specific button presses and sequences to activate each sound mode and explore the full range of audio effects.
Maintenance
- Clean the belt with a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish.
- Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
- Remove batteries if the product will not be used for an extended period to prevent potential battery leakage and damage.
Troubleshooting
- No Power: Ensure batteries are correctly installed with the proper polarity and are not depleted. Replace with fresh AAA batteries if necessary.
- No Sound: Check battery power. If there is a volume control, ensure it is not set to minimum.
- Infrared Sensors Not Responding: Ensure there are no obstructions blocking the infrared sensors on the belt. Verify that the transformation pose is performed clearly and within range of the sensors.
- Lights Not Functioning: Check battery power. If specific LEDs are not working, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 11.41 x 15.35 x 4.37 inches |
| Item Weight | 14.4 ounces |
| Item Model Number | BAN58617 |
| Batteries Required | 6 AAA batteries (not included) |
| Recommended Age | 12 years and up |
| Manufacturer | Bandai |
| Release Date | December 15, 2021 |
Warranty and Support
For product support, warranty information, and assistance within the United States, please refer to the Bluefin / Bandai Namco warning label affixed to the product box. This label serves as proof of an officially licensed Bandai product and provides details for authorized support services.
