Product Overview
The GFW-MIC-0501 desktop microphone stand by Gator Frameworks provides a functional and simplified mic stand solution for streaming, podcasts, broadcasts, and desktop audio production. This stand is designed for stability and adjustability, making it suitable for various applications.
Key Features:
- Stable & Adjustable: Features a round weighted base with a height range of 9.5 inches (241mm) to 14.5 inches (368mm).
- Universal Mic Compatibility: Designed to fit popular podcast microphones, including Shure SM7B, Shure MV7, RODE Procaster, and RODE PodMic.
- Versatile Use: Ideal for streaming, podcasts, broadcasting, desktop recording, kick drums, and low-profile speaker cabinets.
- Durable & Compact: Constructed with heavy-duty steel tubing and a 5.88-inch (149mm) round cast-iron base for enhanced stability.
- Non-Slip & Vibration Resistant: The base is equipped with rubber feet to minimize movement and reduce unwanted noise transference.
Package Contents
- Gator Frameworks Desktop Microphone Stand (GFW-MIC-0501)
Setup Instructions
1. Attaching the Base
Carefully unpackage all components. Place the round weighted base on a stable, flat surface. Align the threaded rod of the stand's main shaft with the threaded hole in the center of the base. Rotate the main shaft clockwise until it is securely fastened to the base. Do not overtighten.
2. Attaching the Microphone Clip/Mount
The stand features a 5/8-27 threaded adapter at the top. If your microphone clip or shock mount uses a 5/8-inch thread, screw it directly onto the top of the stand. If your microphone clip requires a 3/8-inch thread, remove the included 5/8-27 adapter by unscrewing it counter-clockwise, then attach your 3/8-inch compatible clip.
3. Securing the Microphone
Once the microphone clip is attached, gently insert your microphone into the clip. Ensure the microphone is seated firmly and securely to prevent accidental drops.
Operating Instructions
Adjusting Height
To adjust the height of the microphone stand, locate the locking twist clutch on the main shaft. Rotate the clutch counter-clockwise to loosen it. Extend or retract the upper shaft to the desired height, which ranges from 9.5 inches (241mm) to 14.5 inches (368mm). Once the desired height is achieved, rotate the twist clutch clockwise to securely lock the shaft in place. Ensure the clutch is tightened sufficiently to prevent slippage.
Maintenance
- Regularly inspect all components for signs of wear or damage.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the twist clutch mechanism operates smoothly. If it becomes stiff, a small amount of silicone lubricant can be applied, avoiding contact with the microphone.
- Check the rubber feet on the base periodically to ensure they are intact and provide adequate grip.
Troubleshooting
Stand is unstable or tips easily
- Ensure the base is placed on a flat, stable surface.
- Verify that the main shaft is securely tightened into the weighted base.
- Confirm that the microphone is properly balanced in its clip. Heavy microphones may require careful positioning to maintain stability.
Height adjustment mechanism slips
- Ensure the twist clutch is fully tightened after adjusting the height.
- Check for any debris or foreign objects within the clutch mechanism that might prevent proper locking.
Microphone does not fit the stand's thread
- Confirm whether your microphone clip requires a 5/8-inch or 3/8-inch thread. The stand includes a removable 5/8-27 adapter. Remove it for 3/8-inch compatibility.
- If your microphone requires a different thread size, a separate adapter may be needed.
Specifications
| Feature | Detail |
|---|---|
| Brand | Gator Frameworks |
| Model Number | GFW-MIC-0501 |
| Material | Steel, Iron |
| Item Weight | 2.6 Pounds (1.17 kg) |
| Item Dimensions (L x W x H) | 15 x 5.87 x 5.87 inches (381 x 149 x 149 mm) |
| Maximum Height | 14.5 inches (368 mm) |
| Minimum Height | 9.5 inches (241 mm) |
| Base Type | Round Weighted |
| Base Diameter | 5.88 inches (149 mm) |
| Microphone Stand Thread Size | 5/8 Inch (with removable adapter) |
| Finish Type | Powder Coated |
Warranty Information
This Gator Frameworks Desktop Microphone Stand (GFW-MIC-0501) is covered by a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, including specific coverage and limitations, please refer to the official Gator Frameworks website or contact their customer support department.
Customer Support
For further assistance, technical support, or warranty claims regarding your Gator Frameworks Desktop Microphone Stand, please utilize the following resources:
- Official Website: Visit the Gator Frameworks website for product information, FAQs, and support contact details.
- Amazon Brand Store: Explore the Gator Frameworks Amazon Store for additional products and information.