Mooas Dual LED Moon Night Light Digital Alarm Clock User Manual

Introduction

This manual provides instructions for the setup, operation, and maintenance of your Mooas Dual LED Moon Night Light Digital Alarm Clock (Model: MC-RLEDW2R). Please read this manual thoroughly before using the product to ensure proper function and longevity.

Figure 1: Mooas Dual LED Moon Night Light Digital Alarm Clock

Important Safety Information

• Do not expose the device to water or excessive moisture.
• Avoid placing the device near heat sources or in direct sunlight.
• Use only the provided power adapter and cables.
• Keep out of reach of children.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.

Package Contents

Verify that all items are present in your package:

• Mooas Dual LED Moon Night Light Digital Alarm Clock
• Remote Control
• Power Adapter (USB cable and wall adapter)
• User Manual (this document)
• CR2032 Battery (pre-installed for time memory)

Setup

1. Power Connection

1. Connect the provided USB cable to the clock's power input port.
2. Plug the other end of the USB cable into the wall adapter.
3. Insert the wall adapter into a standard electrical outlet.
4. The clock display will illuminate.

Note: A CR2032 battery is pre-installed to maintain time settings during power outages. Ensure any protective tab is removed from the battery compartment if the clock does not retain time after initial setup.

2. Remote Control Setup

The remote control is used for all settings and operations. It may have a protective plastic tab that needs to be removed from the battery compartment before first use.

Figure 2: Remote Control for the Mooas Clock

The remote control can be magnetically attached to the base of the clock for convenient storage.

Operating Instructions

1. Setting Time and Date

Use the remote control to adjust time and date settings.

• Set Time: Press the "Time Set" button on the remote. Use the arrow buttons to adjust hours and minutes. Press "Time Set" again to confirm.
• Set Date: Press the "Date Set" button. Use arrow buttons to adjust year, month, and day. Press "Date Set" again to confirm.
• 12/24 Hour Mode: Press the "12/24H" button to switch between 12-hour and 24-hour display formats.

2. Alarm Function

• Set Alarm: Press the "Alarm Set" button. Use arrow buttons to set the desired alarm time. Press "Alarm Set" again to confirm.
• Activate/Deactivate Alarm: Press the "Alarm ON/OFF" button to toggle the alarm. An alarm icon will appear on the display when active.
• Snooze: When the alarm sounds, press the "Snooze" button on the remote to temporarily silence it. The alarm will sound again after a set interval (typically 5-10 minutes).
• Stop Alarm: To stop the alarm completely, press any other button on the remote or the "Alarm ON/OFF" button.

3. Adjusting Clock Display Brightness

The clock display has three brightness levels (High, Medium, Low).

• Press the "Clock Brightness" button on the remote control to cycle through the brightness levels.

Figure 3: Clock Display with White LED

Figure 4: Clock Display with Orange LED

4. Night Light Function

The moon night light offers 7 distinct colors and an automatic color change mode.

• Change Color: Press the "LED Color" button on the remote control to cycle through blue, sky blue, green, yellow, red, purple, white, and RGB auto change mode.
• Night Light Brightness: The night light brightness is not independently adjustable via remote.
• Automatic Dimming Mode: The clock features an automatic dimming mode where the night light's color and brightness will automatically adjust to a dimmer setting during a specified time period (default: 6:00 PM to 6:00 AM). This setting can be customized using the remote control. Refer to the remote control's specific buttons for "Auto Dim Set" or similar.

Figure 5: Available Night Light Colors

5. Usage Modes

The device can be used in various configurations:

• Clock Mode: Only the digital clock display is active.
• Night Light Mode: Only the moon night light is active.
• Clock + Night Light Mode: Both the digital clock and the moon night light are active simultaneously.

Specific buttons on the remote control allow switching between these modes. Consult the remote for labels such as "Mode" or dedicated ON/OFF buttons for clock and night light.

Figure 6: Wall-mounted usage example

Figure 7: Desk clock usage example

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement (Remote Control): If the remote control's functionality decreases, replace its battery (type not specified, usually CR2025 or CR2032).
• Time Memory Battery (CR2032): The CR2032 battery for time memory typically lasts several years. If the clock loses time settings after a power outage, replace this battery.

Troubleshooting

Specifications

Warranty Information

Mooas products are covered by a limited warranty against defects in materials and workmanship. The specific warranty period may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Mooas customer support.

Customer Support

If you encounter any issues or have questions regarding your Mooas Dual LED Moon Night Light Digital Alarm Clock that are not addressed in this manual, please contact Mooas customer support. Contact information can typically be found on the product packaging or the official Mooas website.

For online support, visit: www.mooas.com