Himalayan Salt Lamp Cord User Manual

1. Introduction

Thank you for choosing the SCOMX Himalayan Salt Lamp Cord with Dimmer Switch. This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your new salt lamp cord. Please read this manual thoroughly before use and retain it for future reference.

2. Product Overview

The SCOMX Himalayan Salt Lamp Cord is designed as a replacement or new installation power cord for Himalayan salt lamps. It features a convenient dimmer switch for adjustable brightness and comes with six E12 base 8W bulbs, ensuring you have spares for long-term use. The cord is 5 feet long, providing ample reach for various setups.

Figure 2.1: Complete set of the Himalayan Salt Lamp Cord, including the dimmer switch, base assembly, and six E12 8W bulbs.

3. Safety Instructions

• Always unplug the cord from the power outlet before installing, replacing bulbs, or performing any maintenance.
• Do not use this cord with lamps or bulbs exceeding the specified wattage (8W per bulb).
• Ensure the cord is not pinched or damaged. Do not operate if the cord or plug is damaged.
• Keep the cord and lamp away from water or excessive moisture. This product is for indoor use only.
• Do not attempt to modify or repair the cord or dimmer switch. Refer to qualified personnel for service.
• Keep out of reach of children and pets.

4. Package Contents

Please verify that all items are present and in good condition upon opening the package:

• 1 x Himalayan Salt Lamp Cord with Dimmer Switch and E12 Base Assembly (5 feet)
• 6 x E12 Base 8W Incandescent Bulbs

5. Setup and Installation

Follow these steps to properly install the salt lamp cord into your Himalayan salt lamp:

1. Prepare the Lamp: Ensure your Himalayan salt lamp is stable and on a flat surface. Locate the opening at the bottom of the salt lamp where the cord assembly will be inserted.
2. Insert Bulb: Gently screw one of the provided E12 8W bulbs into the socket of the cord assembly. Do not overtighten.


Figure 5.1: Close-up view of the E12 bulb socket, ready for bulb insertion.

3. Insert Cord Assembly: Carefully insert the entire cord assembly, with the bulb screwed in, into the opening at the bottom of your salt lamp. The base of the cord assembly is designed to fit snugly within the lamp's cavity.

Figure 5.2: Visual guide showing the process of inserting the cord assembly into the salt lamp (steps 1-6).
4. Secure the Base: Ensure the plastic clips or tabs on the base of the cord assembly are properly seated and secure within the lamp's opening. This provides stability for the bulb and cord.
5. Position the Lamp: Place the salt lamp in your desired location, ensuring the cord is not tangled or obstructing pathways.
6. Plug In: Plug the power cord into a standard 110V AC electrical outlet.

6. Operating Instructions

Your SCOMX salt lamp cord features an inline dimmer switch for convenient control of light intensity.

Figure 6.1: The inline dimmer switch allows for precise control over the lamp's brightness, from dim to bright.

• Turning On/Off: Rotate the dimmer knob clockwise until you hear a click. This turns the lamp on. To turn off, rotate the knob counter-clockwise until you hear a click.
• Adjusting Brightness: Once the lamp is on, continue rotating the dimmer knob clockwise to increase brightness, and counter-clockwise to decrease brightness.

Figure 6.2: A Himalayan salt lamp fully assembled and illuminated, demonstrating the product in use.

7. Maintenance

• Cleaning: Ensure the cord is unplugged before cleaning. Wipe the cord and dimmer switch with a dry, soft cloth. Do not use liquid cleaners.
• Bulb Replacement:
  1. Unplug the cord from the power outlet.
  2. Carefully remove the cord assembly from the salt lamp.
  3. Unscrew the old bulb counter-clockwise.
  4. Screw in a new E12 base, 8W incandescent bulb clockwise until snug.
  5. Reinsert the cord assembly into the salt lamp and plug it back in.
• Storage: If storing the lamp or cord for an extended period, ensure it is clean and dry. Store in a cool, dry place.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For any questions, concerns, or issues regarding your SCOMX Himalayan Salt Lamp Cord, please contact our customer support. While specific warranty details are not provided in this manual, we are committed to ensuring your satisfaction with our products.

Please refer to your purchase documentation or the retailer's website for specific warranty terms and conditions. For technical support or troubleshooting assistance beyond what is covered in this manual, please reach out to the seller or manufacturer directly.