1. Introduction
The Greenworks GD24X2TX 2x24V cordless grass trimmer and brush cutter is designed for precise and efficient lawn edging and clearing. This versatile tool operates on two 24V Li-Ion batteries (not included) and features a 40 cm cutting width, 5600 RPM, and uses either a 2 mm nylon line or a 25 cm blade. It includes an adjustable auxiliary handle and a 2-part telescopic shaft for user comfort and adaptability to various tasks and user heights.
The 24V batteries are part of Greenworks' universal battery system, compatible with numerous Greenworks garden and DIY tools, offering cordless operation and freedom of movement without the hassle of power cords. Integrated LEDs on the batteries provide a convenient indication of the remaining charge level. This package includes the GD24X2TX trimmer/brush cutter only; batteries and charger are sold separately.
2. Safety Information
WARNING: When operating the brush cutter or grass trimmer, flying objects can cause injury. Always wear appropriate personal protective equipment (PPE) including safety glasses, sturdy footwear, and protective clothing. Ensure that other individuals and animals are kept at a safe distance from the operating area to prevent accidents.
- Always read and understand the entire instruction manual before operating the tool.
- Keep hands and feet away from the cutting head while the tool is running.
- Do not operate the tool in wet conditions or rain.
- Inspect the work area for debris, rocks, or other objects that could be thrown by the cutting head.
- Ensure the auxiliary handle is securely fastened and adjusted for comfortable and controlled operation.
- Remove the battery pack when not in use, before cleaning, or when performing maintenance.
3. Product Components
Familiarize yourself with the main components of your Greenworks GD24X2TX trimmer/brush cutter:
- Motor Head: Contains the motor and variable speed trigger.
- Shaft: A 2-part telescopic shaft for adjustable length and easy storage.
- Adjustable Auxiliary Handle: Provides additional control and comfort during operation.
- Guard: Protects the user from flying debris.
- Cutting Head: Equipped with a 2.4mm dual line bump feed head for grass trimming, and compatible with a 25cm blade for brush cutting.
- Battery Compartment: Designed to hold two 24V Greenworks batteries (sold separately).
Image 3.1: Overview of the Greenworks GD24X2TX trimmer showing the variable speed trigger, adjustable auxiliary handle, 35.6/40.6cm cutting path, and 2.4mm dual line bump feed head. Note that batteries are not included.
4. Setup
4.1. Assembly of the Shaft
- Align the two sections of the shaft.
- Push them together until they click securely into place. Ensure the connection is firm and there is no wobble.
4.2. Attaching the Guard
- Position the guard over the cutting head assembly.
- Secure it using the provided screws or fasteners. Ensure it is tightly fastened to prevent movement during operation.
4.3. Installing the Auxiliary Handle
- Slide the auxiliary handle onto the shaft.
- Adjust its position for comfortable grip and balance.
- Tighten the handle securely using the locking mechanism.
Image 4.1: A user operating the Greenworks trimmer, demonstrating the adjustable handle for enhanced control and comfort.
4.4. Battery Installation
- Ensure the tool is turned off.
- Insert two fully charged Greenworks 24V batteries into the battery compartments until they click into place.
- Check the battery charge level using the integrated LED indicators on the batteries.
5. Operating Instructions
5.1. Starting and Stopping the Tool
- To start, press the safety lock-off button and then squeeze the variable speed trigger.
- To stop, release the variable speed trigger.
5.2. Adjusting for Comfort
Adjust the telescopic shaft length and the auxiliary handle position to achieve a comfortable and balanced operating posture. This reduces fatigue and improves control.
5.3. Using the Bump Feed Head
The trimmer features a dual line bump feed head. To advance the cutting line, gently tap the cutting head on the ground while the tool is running. The line will automatically extend to the correct length.
Image 5.1: Close-up view of the bump feed mechanism, illustrating how to advance the cutting line by tapping the head on the ground.
5.4. Trimming and Edging Techniques
- For general trimming, hold the cutting head parallel to the ground and swing it from side to side.
- For edging, tilt the cutting head to a vertical position and guide it along the edge of the lawn or pathway.
- Avoid cutting into hard surfaces or obstacles to prevent damage to the line or blade.
Image 5.2: A user demonstrating the Greenworks trimmer in action, effectively cutting grass and maintaining lawn edges.
6. Maintenance
6.1. Cleaning
- After each use, remove the battery pack.
- Clean the cutting head, guard, and motor housing with a damp cloth. Remove any grass clippings or debris.
- Do not use harsh chemicals or abrasive cleaners.
6.2. Line/Blade Replacement
- Regularly inspect the cutting line for wear and replace it when necessary. Refer to the specific instructions for reloading the bump feed head.
- If using a blade, inspect it for damage or dullness. Replace with a genuine Greenworks replacement blade if needed.
6.3. Battery Care and Storage
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store batteries in a discharged state for extended periods. Charge them periodically if not in use.
- Always use Greenworks original chargers for charging.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not inserted correctly or discharged; Safety lock-off not engaged. | Ensure batteries are fully charged and properly inserted. Press safety lock-off before squeezing trigger. |
| Cutting line does not advance | Line tangled or too short; Bump feed mechanism jammed. | Tap the cutting head firmly on the ground while running. If still stuck, remove battery and manually pull out line or replace spool. |
| Reduced cutting performance | Dull or worn cutting line/blade; Overgrown vegetation. | Replace cutting line or blade. Work in smaller sections for very dense growth. |
| Excessive vibration | Damaged or unbalanced cutting head/blade; Loose components. | Inspect cutting head/blade for damage and replace if necessary. Check all fasteners for tightness. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Greenworks customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | GD24X2TX (01-000002108107) |
| Power Source | 2x 24V Battery (48V total) |
| Cutting Width (Trimmer) | 40 cm |
| Cutting Line Diameter | 2 mm |
| Blade Diameter (Brush Cutter) | 25 cm |
| Speed | 5600 RPM |
| Weight (without batteries) | 4.05 kg |
| Product Dimensions (L x W x H) | 25.4 x 5.08 x 6.86 cm |
| Assembly Required | No (refers to main unit, some assembly of shaft/guard is needed) |
| Components Included | 1x Trimmer/Brush Cutter (batteries and charger sold separately) |
Image 8.1: Comparison highlighting the 48V (2x24V) power of the Greenworks trimmer, offering 20% more power than comparable 36V trimmers.
9. Warranty and Support
9.1. Warranty Information
The Greenworks GD24X2TX Cordless Grass Trimmer & Brush Cutter comes with a 3-year warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Image 9.1: Greenworks offers a 3-year product warranty, reflecting their commitment to quality and performance.
9.2. Customer Support
For technical assistance, warranty claims, or to purchase replacement parts, please visit the official Greenworks website or contact their customer service department. Contact information can typically be found on the Greenworks website or on the product packaging.
