Juskys PIM200L 2-in-1 Ice Cube and Water Dispenser
Instruction Manual
Introduction
Thank you for choosing the Juskys PIM200L Ice Cube and Water Dispenser. This appliance is designed to provide fresh ice cubes and chilled water efficiently. Please read this manual thoroughly before operating the device to ensure safe and optimal performance. Keep this manual for future reference.
Important Safety Instructions
- Read all instructions before use.
- Ensure the power supply matches the rating label on the appliance.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Unplug from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Keep the appliance away from heat sources and direct sunlight.
- Use only potable water in the water tank.
- This appliance is for household use only.
- Ensure proper ventilation around the appliance. Maintain a minimum clearance of 10 cm on all sides.
Package Contents
Please check that all items are present and in good condition:
- 1 x Juskys PIM200L Ice Cube Machine
- 1 x Instruction Manual
Product Overview
Familiarize yourself with the components of your ice cube machine.
Figure 1: Front view of the Juskys PIM200L Ice Cube Machine.
Figure 2: Detail of the control panel and display.
Control Panel Functions:
- TIMER: Activates or sets the timer for automatic shut-off.
- SELECT: Used to choose ice cube size (small/large) or adjust timer settings.
- ON/OFF: Powers the unit on or off.
- ICE: Dispenses ice cubes.
- WATER: Dispenses chilled water.
Setup
1. Unpacking and Placement:
- Remove all packaging materials.
- Place the ice maker on a stable, level surface, away from direct sunlight and heat sources.
- Ensure there is at least 10 cm of clear space around the appliance for proper ventilation.
2. Initial Cleaning:
- Before first use, clean the interior of the water tank and the ice basket with a soft cloth and mild detergent. Rinse thoroughly with clean water.
- Wipe the exterior with a damp cloth.
3. Filling the Water Tank:
Figure 3: Water tank opening for refilling.
- Open the water tank lid located on the top of the appliance.
- Fill the water tank with potable water up to the MAX fill line. Do not overfill. The tank capacity is 2 liters.
- Close the water tank lid securely.
4. Power Connection:
- Plug the power cord into a grounded electrical outlet (220-240V AC, 50Hz).
Operating Instructions
1. Turning On the Appliance:
- Press the ON/OFF button to power on the ice maker. The indicator light will illuminate.
2. Selecting Ice Cube Size:
- After turning on, press the SELECT button to toggle between small and large ice cube sizes. The selected size will be indicated on the display.
- The ice maker will begin producing ice cubes within 6-10 minutes.
3. Dispensing Ice Cubes:
- Place a glass or container under the ice dispenser outlet.
- Press the ICE button to dispense ice cubes directly into your glass. Release the button to stop dispensing.
4. Dispensing Chilled Water:
Figure 4: Dispensing chilled water.
- Place a glass or container under the water dispenser outlet.
- Press the WATER button to dispense chilled water. Release the button to stop dispensing.
5. Using the Timer Function:
- Press the TIMER button. The timer indicator will flash.
- Use the SELECT button to adjust the desired time for automatic shut-off.
- Press TIMER again to confirm the setting. The appliance will automatically turn off after the set time.
6. Standby Mode:
- The appliance features an activatable standby mode for energy saving. Refer to the display for standby indications.
Maintenance
1. Cleaning the Interior:
- Unplug the appliance before cleaning.
- Drain any remaining water from the tank.
- Clean the water tank and ice basket with a solution of mild detergent and warm water. Rinse thoroughly.
- For stubborn deposits, a solution of water and vinegar can be used, followed by thorough rinsing.
- Ensure all parts are dry before reassembling or storing.
2. Cleaning the Exterior:
- Wipe the exterior surface with a soft, damp cloth.
- Do not use abrasive cleaners or solvents that could damage the finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on | No power supply | Check if the power cord is securely plugged into a working outlet. |
| No ice production | Water tank is empty | Fill the water tank with potable water. |
| No ice production | Air temperature is too high | Ensure the appliance is in a room with an ambient temperature between 5-25 °C. |
| Ice cubes are too small | Small ice cube size selected | Press the SELECT button to choose the large ice cube size. |
| Water not dispensing | Water tank is empty | Refill the water tank. |
Technical Specifications
| Feature | Specification |
|---|---|
| Model | PIM200L |
| Material | ABS Plastic |
| Color | Silver |
| Daily Ice Production | Up to 12 kg / 24 hours |
| Water Tank Capacity | 2 Liters |
| Ice Cube Storage Capacity | 0.6 kg |
| Ice Production Time | 6-10 minutes per cycle |
| Ice Cube Sizes | 2 (Small, Large) |
| Climate Class | SN/N/ST/T |
| Refrigerant | R600a / 23g |
| Power Supply | 220-240 V AC, 50 Hz |
| Power Consumption | 120-165 W |
| Protection Class | I |
| Operating/Storage Conditions | 5 - 25 °C |
| Dimensions (L x W x H) | 38.9 cm x 25.2 cm x 36.3 cm |
Figure 5: Product dimensions.
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Juskys customer support.
For technical assistance, troubleshooting beyond this manual, or spare parts, please visit the official Juskys website or contact their customer service department.
