Introduction
Thank you for choosing the TecTake XXL Rattan Lounge Set. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new outdoor furniture. Please read it carefully before use to ensure safe and optimal performance.
This versatile lounge set, designed for maximum comfort and flexibility, includes 5 armchairs, a table, and a storage container, allowing for various configurations to suit your outdoor space.
Safety Instructions
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity for each component: Chair 120 kg, Table 70 kg, Storage Container 20 kg.
- Keep cushions dry. While the rattan is weather-resistant, cushions are not fully waterproof and should be stored in dry conditions or covered during rain.
- Avoid placing hot items directly on the glass tabletop without protection.
- Regularly inspect the furniture for any signs of wear or damage. Do not use if damaged.
Setup and Assembly
The TecTake XXL Rattan Lounge Set requires assembly. It typically arrives in multiple boxes. While assembly can be time-consuming, patience and careful adherence to instructions will ensure a successful setup.
Unboxing
Carefully unpack all components. Verify that all parts listed in the packing list are present and undamaged. Keep the packaging materials until assembly is complete, in case any parts need to be returned or replaced.
Assembly Steps
- Identify Components: Lay out all parts and identify them using the provided parts list. The set includes 5 chairs (various configurations), 1 table, 1 storage container, fixing clips, and assembly materials.
- Assemble Frames: Begin by assembling the steel frames for each chair, the table, and the storage container. Ensure all screws are tightened securely. The robust steel frame is powder-coated for durability.
- Attach Rattan Panels: Secure the polyrattan panels to the assembled frames. The high-quality polyrattan is durable and resistant.
- Install Feet: Attach the anti-slip and anti-scratch feet to the bottom of each furniture piece for stability.
- Tabletop Installation: Place the safety glass top onto the table. It is removable and secured by suction cups.
- Cushion Placement: Place the 8 cm thick soft cushions onto the chairs. Note that cushions are not water-repellent and should be protected from rain.
- Modular Configuration: Use the practical plastic clips to connect the individual modules (chairs, storage container) to create your desired layout.
Operating Instructions
Modular Configuration
The lounge set offers infinite configuration possibilities. You can arrange the 5 chairs, table, and storage container in various layouts to suit your space and needs. Use the provided plastic clips to secure the modules together, preventing them from shifting.
Comfort and Use
The 8 cm thick cushions provide exceptional comfort. The generous seating dimensions offer an ideal place for relaxation. The storage container provides ample space for storing cushions or other outdoor items, and its automatic mechanism facilitates easy opening.
Care and Maintenance
Proper care will extend the life and appearance of your TecTake XXL Rattan Lounge Set.
- Cleaning: Wipe down the rattan and steel frame with a damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
- Cushions: The cushions are not water-repellent. It is recommended to store them in the integrated storage box or indoors during rain or prolonged periods of non-use to prevent water damage and mold.
- Glass Tabletop: Clean the glass tabletop with a standard glass cleaner. The glass is removable for easier cleaning.
- Winter Storage: During winter months or harsh weather conditions, it is advisable to cover the furniture or store it indoors to protect it from extreme temperatures and elements.
- Screws: The screws are made of stainless steel, ensuring durability. Periodically check all screws and tighten if necessary to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty during assembly. | Instructions may be basic or unclear; parts not aligning. | Review the assembly steps carefully. Ensure all parts are oriented correctly before tightening screws. A socket set ratchet with an appropriately sized bit can make tightening easier. If a part is bent or damaged, contact customer support for replacement. |
| Cushions get wet in rain. | Cushions are not water-repellent. | Always store cushions in the integrated storage box or indoors during rain or when not in use. Consider purchasing waterproof covers for the entire set for added protection. |
| Furniture feels unstable or wobbly. | Screws are loose or not fully tightened. | Check all assembly screws and tighten them firmly. Ensure the furniture is placed on a flat, even surface. |
| Missing or damaged parts upon delivery. | Shipping damage or packing error. | Contact TecTake customer support immediately with details of the missing/damaged parts and your purchase information for assistance. |
Product Specifications
| Feature | Detail |
|---|---|
| Model | B08RZ1TMBP |
| Material | Polyrattan, Steel (powder-coated), Fabric (100% polyester), Glass |
| Color | Grey |
| Overall Dimensions (Approx.) | 220 x 220 x 65 cm (L x W x H) |
| Total Weight (Approx.) | 71 kg |
| Seat Height | 34 cm |
| Cushion Thickness | 8 cm |
| Load Capacity (Chair) | 120 kg |
| Load Capacity (Table) | 70 kg |
| Load Capacity (Storage Container) | 20 kg |
| Manufacturer Reference | 800825 |
Warranty Information
TecTake products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official TecTake website. Generally, products are covered against manufacturing defects for a specified period from the date of purchase.
Please retain your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact TecTake customer support.
Contact Information:
- Website: www.tectake.de (Please check for your regional website for specific contact details)
- Email: Refer to the product packaging or official website for email support.
- Phone: Refer to the product packaging or official website for phone support.
When contacting support, please have your product model number (B08RZ1TMBP) and purchase date ready.
