1. Introduction
Thank you for choosing uvce Bell Glides Caster Wheels. This manual provides detailed instructions for the proper installation and use of your new furniture glides. These glides are designed to convert rolling chairs or furniture into stationary units, offering stability and protecting floor surfaces.
Please read this manual thoroughly before installation to ensure correct assembly and optimal performance.
2. Product Components
The package includes the following items:
- 5 x Bell Glides (stationary feet)
- 5 x Mounting Stem Sleeve Sockets
Image 2.1: Contents of the uvce Bell Glides package, showing five black bell glides with silver accents and five silver mounting sleeve sockets.
Image 2.2: A detailed view of a single uvce Bell Glide and its corresponding mounting sleeve socket, highlighting the stem and socket design.
3. Specifications
| Feature | Specification |
|---|---|
| Model | CW55 |
| Brand | uvce |
| Material | Nylon |
| Color | Black |
| Mounting Type | Stem Mount |
| Stem Dimensions | 8mm (0.32") diameter x 36mm (1.42") length |
| Overall Glide Height (installed) | Approximately 56mm (2.2") |
| Glide Base Diameter | Approximately 60mm (2.36") |
| Socket Dimensions | 8mm (0.31") inner diameter x 30mm (1.18") length |
| Load Capacity | 550 pounds (total for 5 glides) |
| Surface Recommendation | Multi-Surface (ideal for carpets and mats; may damage wood flooring) |
Image 3.1: Detailed measurements of the uvce Bell Glide, showing its height and base diameter.
Image 3.2: Detailed measurements of the mounting stem sleeve socket, including its length and diameter.
4. Installation Instructions
These bell glides are designed for friction stem installation, where the stem locks into a socket located inside the furniture leg. This method allows for easy insertion and removal.
Tools Required:
- Drill
- Appropriate size drill bit (8mm or 5/16" for the socket hole)
- Hard mallet or small hammer
Installation Steps:
- Prepare the Furniture Leg: If replacing existing casters, remove them. If installing on new furniture, identify the center point on the bottom of each furniture leg where the glide will be installed.
- Drill the Hole: Using a drill and an appropriate drill bit (approximately 8mm or 5/16" in diameter), drill a hole into the wooden furniture leg. Ensure the hole depth is sufficient to accommodate the 30mm length of the sleeve socket.
- Insert the Socket: Place a mounting stem sleeve socket into the drilled hole. Use a hard mallet or small hammer to gently tap the socket into place until it is flush with the furniture surface.
- Attach the Glide: Align the stem of the bell glide with the installed sleeve socket. Push the stem firmly into the socket until it locks securely in position.
- Repeat: Repeat these steps for all remaining furniture legs.
Image 4.1: Visual representation of the installation process: drilling a hole, tapping in the socket, and pushing in the glide stem.
Image 4.2: Examples of the bell glides installed on various furniture items, including an office chair, cabinet, and shelving unit.
5. Operating Instructions
Once installed, the uvce Bell Glides convert your furniture into a stationary unit. This provides stability and prevents unwanted movement. The glides are designed to allow for occasional repositioning by lifting and moving the furniture, rather than rolling it.
Important Note: The glide bells are made of a hard nylon material. While suitable for carpets and mats, the density of this material may cause damage to delicate wood flooring if dragged. Exercise caution when moving furniture equipped with these glides on wood surfaces.
6. Maintenance
These bell glides require minimal maintenance. Periodically inspect the glides and their connection to the furniture legs to ensure they remain securely in place. Clean the glides with a damp cloth if dust or debris accumulates.
7. Troubleshooting
Problem: Glide does not fit into the existing hole.
- Solution: The stem diameter is 8mm (0.32"). Ensure your furniture's socket hole is compatible. If the existing hole is too large (e.g., 3/8"), these glides may not fit securely without an adapter (not included). If the hole is too small, it may need to be drilled to the correct size.
Problem: Glide feels loose after installation.
- Solution: Ensure the sleeve socket was fully inserted and flush with the furniture surface. The stem of the glide should be pushed firmly into the socket until it locks. If the hole is too wide for the socket, the connection may not be secure.
8. Warranty and Support
For any questions, concerns, or support needs regarding your uvce Bell Glides, please refer to your purchase documentation or contact the seller directly. Specific warranty details are typically provided at the point of purchase.