BEAST Mini Bluetooth Speaker Model QUVE User Manual

1. Introduction

This manual provides detailed instructions for the operation and maintenance of your BEAST Mini Bluetooth Speaker Model QUVE. Please read this manual thoroughly before using the product to ensure proper function and to extend its lifespan. Keep this manual for future reference.

2. Product Features

• Bluetooth 5.0 for wireless audio streaming.
• Integrated FM Radio tuner.
• USB port for audio playback from flash drives.
• 3.5mm Auxiliary input for wired connections.
• Micro SD card slot for direct audio playback.
• Compact and portable design.

3. Package Contents

Please check the package for the following items:

• BEAST Mini Bluetooth Speaker Model QUVE
• USB Charging Cable
• User Manual (this document)

Image: The BEAST Mini Bluetooth Speaker Model QUVE in its retail packaging, showing the speaker and its key features.

4. Product Overview

4.1 Front Panel Controls

Image: Front view of the BEAST Mini Bluetooth Speaker, highlighting the control buttons at the top.

• ☀ (Mode/Light Button): Short press to switch between modes (Bluetooth, FM, USB, Micro SD, AUX). Long press to control LED lighting (if applicable).
• ⏻ (Power Button): Long press to power on/off. Short press to play/pause in music modes, or answer/end calls in Bluetooth mode.
• ◀◀ (Previous/Volume Down): Short press for previous track/station. Long press to decrease volume.
• ▶▶ (Next/Volume Up): Short press for next track/station. Long press to increase volume.

4.2 Rear Panel Ports

Image: Rear view of the BEAST Mini Bluetooth Speaker, showing the various input ports.

• Micro USB Port: For charging the speaker.
• USB Port: For connecting USB flash drives for audio playback.
• Micro SD Card Slot: For inserting Micro SD cards for audio playback.
• AUX Input (3.5mm): For connecting external audio devices via a 3.5mm audio cable.

5. Setup

5.1 Charging the Speaker

1. Connect the supplied USB charging cable to the Micro USB port on the speaker.
2. Connect the other end of the USB cable to a USB power adapter (5V) or a computer's USB port.
3. The charging indicator light will illuminate (color may vary by model) to show that the speaker is charging.
4. Once fully charged, the indicator light will change or turn off. Disconnect the charging cable.

Note: For first-time use, it is recommended to fully charge the speaker.

5.2 Powering On/Off

• To Power On: Long press the ⏻ (Power) button until you hear an audible prompt or see an indicator light.
• To Power Off: Long press the ⏻ (Power) button again until the speaker powers down.

6. Operating Instructions

6.1 Bluetooth Connection

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing light and/or an audible prompt.
2. On your mobile device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
3. Select "QUVE" or "BEAST QUVE" from the list of found devices.
4. Once connected, the speaker will provide an audible confirmation, and the indicator light will stop flashing.
5. You can now play audio from your device through the speaker.

Note: The speaker will automatically attempt to reconnect to the last paired device when powered on.

6.2 FM Radio Mode

1. Power on the speaker. Short press the ☀ (Mode) button repeatedly until you enter FM Radio mode.
2. In FM mode, long press the ⏻ (Power) button to automatically scan and save available FM stations.
3. Use the ◀◀ (Previous) and ▶▶ (Next) buttons to switch between saved stations.

6.3 USB Playback Mode

1. Insert a USB flash drive containing MP3 audio files into the USB port on the rear of the speaker.
2. Short press the ☀ (Mode) button repeatedly until you enter USB playback mode. The speaker will automatically begin playing audio files.
3. Use the ◀◀ (Previous) and ▶▶ (Next) buttons to navigate tracks.
4. Short press the ⏻ (Power) button to play/pause.

6.4 Micro SD Card Playback Mode

1. Insert a Micro SD card containing MP3 audio files into the Micro SD card slot on the rear of the speaker.
2. Short press the ☀ (Mode) button repeatedly until you enter Micro SD card playback mode. The speaker will automatically begin playing audio files.
3. Use the ◀◀ (Previous) and ▶▶ (Next) buttons to navigate tracks.
4. Short press the ⏻ (Power) button to play/pause.

6.5 Auxiliary (AUX) Input Mode

1. Connect one end of a 3.5mm audio cable (not included) to the AUX input port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your external device.
3. Short press the ☀ (Mode) button repeatedly until you enter AUX mode.
4. Control audio playback directly from your connected external device.

6.6 Volume Control

• Increase Volume: Long press the ▶▶ (Next/Volume Up) button.
• Decrease Volume: Long press the ◀◀ (Previous/Volume Down) button.

7. Maintenance

• Keep the speaker away from water, moisture, and extreme temperatures.
• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid dropping the speaker or subjecting it to strong impacts.
• When not in use for extended periods, store the speaker in a cool, dry place and charge it periodically to maintain battery health.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official BEAST website. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: BEAST