Fresh 'n Rebel Code ANC Bluetooth On-Ear Headphones User Manual

Introduction

Welcome to your Fresh 'n Rebel Code ANC Bluetooth On-Ear Headphones user manual. These headphones are designed for everyday use, offering a comfortable fit, slim design, and advanced Active Noise Cancellation (ANC) technology. This manual provides essential information on setting up, operating, and maintaining your headphones to ensure optimal performance.

Image: The Fresh 'n Rebel Code ANC Bluetooth On-Ear Headphones in Silky Sand, showcasing their sleek design.

What's Included

Your Fresh 'n Rebel Code ANC headphones package includes the following items:

Image: The Fresh 'n Rebel Code ANC headphones, along with their accessories: a 3.5mm audio cable, a USB-C charging cable, and a grey storage bag.

• Fresh 'n Rebel Code ANC Bluetooth On-Ear Headphones
• Audio cable (3.5 mm)
• Charging cable (USB-C)
• Storage bag

Setup

1. Charging the Headphones

Before first use, fully charge your Code ANC headphones. A full charge takes approximately 2 hours.

1. Connect the supplied USB-C charging cable to the USB-C port on the headphones.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator on the headphones will show charging status (refer to LED indicator section for details).
4. Once fully charged, disconnect the cable.

Image: Illustration showing the USB-C charging port on the headphones and the charging process. The headphones offer 30 hours of playtime, or 17 hours with Active Noise Cancellation enabled, and fully charge in 2 hours.

2. Bluetooth Pairing

Pair your headphones with your Bluetooth-enabled device (smartphone, tablet, computer).

1. Ensure the headphones are turned off.
2. Press and hold the power button until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device, go to Bluetooth settings and enable Bluetooth.
4. Select "Code ANC" from the list of available devices.
5. Once connected, the LED indicator will turn solid blue.

3. Wired Connection (Optional)

You can also use the headphones with the included 3.5mm audio cable for devices without Bluetooth or when the battery is depleted.

1. Connect one end of the 3.5mm audio cable to the audio input port on the headphones.
2. Connect the other end to the 3.5mm audio jack on your device.
3. The headphones will function as passive headphones in wired mode.

Operating Your Headphones

1. Power On/Off

• Power On: Press and hold the power button for 3 seconds. The LED will light up.
• Power Off: Press and hold the power button for 3 seconds. The LED will turn off.

2. Music Playback Controls

• Play/Pause: Press the multi-function button once.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.
• Volume Up: Press the '+' button briefly.
• Volume Down: Press the '-' button briefly.

3. Call Management

• Answer/End Call: Press the multi-function button once.
• Reject Call: Press and hold the multi-function button for 2 seconds.

4. Active Noise Cancellation (ANC)

The Code ANC headphones feature advanced Active Noise Cancellation to reduce ambient noise by up to 25 dB, particularly effective against low-frequency sounds like engine hum.

Image: A visual representation of how ANC works, depicting sound waves of ambient noise being cancelled out to enhance the listening experience.

• Activate ANC: Press the ANC button once. The ANC indicator light will illuminate.
• Deactivate ANC: Press the ANC button once again. The ANC indicator light will turn off.

5. Voice Assistant

Activate your device's voice assistant (e.g., Siri, Google Assistant) directly from your headphones.

• Activate Voice Assistant: Double-press the multi-function button.

Maintenance

Proper care and maintenance will extend the life of your headphones.

• Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the headphones in the provided storage bag to protect them from dust and scratches. Avoid storing in extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge regularly.

Troubleshooting

If you encounter any issues with your headphones, please refer to the table below for common problems and their solutions.

Specifications

Key technical specifications for the Fresh 'n Rebel Code ANC headphones:

Warranty and Support

Your Fresh 'n Rebel Code ANC headphones come with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Fresh 'n Rebel website.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Fresh 'n Rebel customer support through their official channels.