1. Introduction and Product Overview
The ELIVED EV009 is a versatile full-motion TV wall mount designed to securely hold flat or curved screen televisions and monitors. It offers a wide range of adjustability, including tilt, swivel, and extension, to provide optimal viewing angles from various positions in a room. Constructed from high-quality steel, this mount ensures stability and safety for your display.
Image 1.1: ELIVED EV009 TV Wall Mount and included accessories.
2. Safety Information
Please read all instructions carefully before installation. If you have any doubts about the installation process, consult a qualified professional. Improper installation may result in serious injury or damage to your TV and property.
- Weight Capacity: Do not exceed the maximum weight capacity of 40 kg (88 lbs).
- TV Size: Ensure your TV size is within the recommended range of 26 to 60 inches.
- VESA Compatibility: Verify your TV's VESA pattern is between 100x100mm and 400x400mm.
- Wall Type: This mount is designed for installation on solid concrete walls, concrete block walls, or single wood studs. DO NOT install on drywall or plasterboard alone without proper stud support.
- Tools: Use appropriate tools and wear safety gear during installation.
- Cable Management: Ensure all cables are routed safely and do not interfere with the mount's movement.
3. Package Contents
Before beginning installation, please check that all parts are present and undamaged. Refer to the parts list below and the main product image for identification. All accessories are provided in pre-labeled bags for easy identification.
- TV Wall Mount Assembly (Wall Plate and TV Brackets)
- Mounting Hardware Kit (various screws, washers, spacers for TV and wall)
- Spirit Level
- Cable Ties (Velcro)
- Instruction Manual (this document)
4. Setup and Installation
Follow these steps for a secure and successful installation. It is recommended to have two people for installation, especially when mounting the TV.
4.1 Pre-Installation Checklist
Before drilling, confirm the following:
- Wall Type: Ensure your wall is solid concrete, concrete block, or a single wood stud.
- TV Specifications: Your TV size is between 26"-60" and weighs no more than 40kg.
- VESA Pattern: Your TV's VESA mounting holes are between 100x100mm and 400x400mm.
- Cable Exit: Check that the TV's cable exit points will not be blocked by the mount.
Image 4.1: Pre-installation checklist for compatibility.
4.2 Easy 3-Step Installation Process
- Attach Brackets to TV Back: Secure the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are firmly tightened.
- Install Wall Plate: Mark the desired mounting height on the wall. Use the spirit level to ensure the wall plate is perfectly horizontal. Drill pilot holes and secure the wall plate to the wall using the provided anchors and screws suitable for your wall type.
- Hang TV on Wall Plate: Carefully lift the TV with the attached brackets and hook it onto the installed wall plate. Ensure the TV is securely seated on the mount.
Image 4.2: Visual guide for the 3-step installation.
5. Operating Instructions (Adjustments)
The ELIVED EV009 mount offers flexible adjustments for an optimal viewing experience.
5.1 Swivel Adjustment
The mount allows for a swivel movement of up to +/-90 degrees, depending on your TV size and wall distance. Gently push or pull the TV to the desired left or right angle.
Image 5.1: Demonstrating the +/-90 degree swivel capability.
5.2 Tilt Adjustment
Adjust the vertical tilt of your TV from +5 degrees (upward) to -15 degrees (downward) to reduce glare and optimize viewing from different heights. Loosen the tilt knobs, adjust to the desired angle, and then re-tighten the knobs to secure the position.
Image 5.2: Illustrating the +5/-15 degree tilt function.
5.3 Level Adjustment
The mount allows for a +/-3 degree rotation adjustment to ensure your TV is perfectly level after installation, even if the wall plate was not installed perfectly straight.
Image 5.3: Demonstrating the +/-3 degree level adjustment.
5.4 Extension and Retraction
The mount can extend your TV from the wall by 64mm (2.5 inches) up to 479mm (18.9 inches), allowing for flexible positioning and easy access to cables.
Image 5.4: Flexible extension from 64mm to 479mm.
6. Maintenance
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments may cause them to loosen.
- Movement: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the pivot points. Avoid oil-based lubricants that can attract dust.
7. Troubleshooting
If you encounter issues with your ELIVED EV009 TV wall mount, refer to the common problems and solutions below.
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level | Wall plate not perfectly level; TV not adjusted. | Use the +/-3 degree level adjustment feature to correct the tilt. |
| Mount feels loose or wobbly | Screws or bolts are loose; incorrect wall anchors used. | Tighten all mounting screws. Ensure correct anchors were used for your wall type. If unsure, consult a professional. |
| Difficulty adjusting tilt/swivel | Adjustment knobs are too tight; lack of lubrication. | Loosen adjustment knobs slightly. Apply silicone-based lubricant to pivot points if necessary. |
| TV does not fit the mount | Incorrect VESA pattern or TV size/weight. | Verify your TV's VESA pattern, size, and weight against the specifications. This mount supports VESA 100x100mm to 400x400mm, 26-60 inch TVs, up to 40kg. |
If you experience issues not listed here or require further assistance, please contact ELIVED customer support.
8. Specifications
Detailed technical specifications for the ELIVED EV009 TV Wall Mount.
| Feature | Specification |
|---|---|
| Brand | ELIVED |
| Model Number | EV009-DE |
| Color | Black |
| Compatible Devices | Monitor, Television |
| Material | Steel (suitable for concrete walls) |
| Mounting Type | Wall Mount |
| Movement Type | Full Motion (Swivel, Tilt, Extension, Level) |
| Max Tilt Angle | +5° / -15° |
| Swivel Angle | +/-90° (TV size dependent) |
| Level Adjustment | +/-3° |
| Extension from Wall | 64mm (2.5") to 479mm (18.9") |
| Weight Capacity | Up to 40 kg (88 lbs) |
| VESA Compatibility | 100x100mm to 400x400mm |
| TV Size Compatibility | 26 - 60 inches |
Image 8.1: Detailed product dimensions.
Image 8.2: Overview of strong compatibility features.
9. Warranty and Customer Support
ELIVED is committed to providing high-quality products and excellent customer service. If you have any questions, concerns, or require assistance with your ELIVED EV009 TV wall mount, please do not hesitate to contact our professional customer service team.
- Unsure if the mount is suitable for your TV?
- Experiencing problems during installation?
- Need additional hardware (screws, spacers, washers, etc.)?
- Require further assistance?
Please reach out to the seller or ELIVED customer support directly for prompt assistance. Contact information can typically be found on the product packaging or the seller's page on the platform where you purchased the product.
