LENSUN 14FT

LENSUN 14FT Inflatable Projector Screen Instruction Manual

Model: 14FT

1. Introduction

Thank you for choosing the LENSUN 14FT Inflatable Projector Screen. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your inflatable projector screen. Please read these instructions carefully before use and retain them for future reference.

LENSUN 14FT Inflatable Projector Screen inflated in a backyard, displaying a shark image.

Image 1.1: The LENSUN 14FT Inflatable Projector Screen in an outdoor setting.

2. Package Contents

Verify that all components are present and undamaged upon opening the package. If any items are missing or damaged, please contact customer support.

  • Inflatable Frame (1)
  • Detachable Projection Screen (1)
  • Blower Motor (1)
  • Ground Stakes (8)
  • Fixed Ropes (4)
  • Carry Bag (1)
Diagram showing all components included with the LENSUN inflatable projector screen: inflatable frame, detachable screen, blower motor, ground stakes, fixed ropes, and a carry bag.

Image 2.1: Illustrated view of the LENSUN 14FT Inflatable Projector Screen components.

3. Safety Information

Adhere to the following safety guidelines to prevent injury or damage to the product:

  • Electrical Safety: Ensure the blower motor is connected to a grounded outlet. Do not operate the blower in wet conditions or near water. Keep children away from electrical components.
  • Anchoring: Always secure the inflatable screen with the provided ground stakes and ropes, especially in windy conditions, to prevent it from tipping or blowing away.
  • Clearance: Maintain adequate clearance around the inflated screen to avoid obstructions and ensure safe movement.
  • Supervision: Do not leave the inflatable screen unattended, particularly when children are present.
  • Material Care: Avoid sharp objects near the screen material and inflatable frame to prevent punctures.

4. Setup Instructions

Follow these steps for proper assembly and inflation of your projector screen:

  1. Choose a Location: Select a flat, clear area free from sharp objects, overhead power lines, and excessive wind. Ensure sufficient space for the 14FT screen, which measures approximately 122"W x 107"H (display area) and has an overall frame size of 10ft wide and 8.2ft high with a 4ft depth at the base.
    2. Diagram illustrating the dimensions of the LENSUN 14FT Inflatable Projector Screen, showing a total width of 10ft, height of 8.2ft, and base depth of 4ft.

    Image 4.1: LENSUN 14FT Inflatable Projector Screen dimensions.

  2. Unfold the Screen: Lay the inflatable frame flat on the chosen surface. Ensure the air intake sleeve for the blower is accessible.
  3. Attach the Projection Screen: Secure the detachable white projection screen to the inflatable frame using the integrated buckles or straps. Ensure it is taut and wrinkle-free for optimal viewing.
  4. Connect the Blower: Attach the blower motor securely to the air intake sleeve of the inflatable frame. Ensure the sleeve is fully open and not twisted.
  5. Inflate the Frame: Plug the blower motor into a suitable electrical outlet. The screen will inflate rapidly, typically within seconds. Ensure the blower runs continuously to keep the screen inflated.
  6. Secure the Screen: Once fully inflated, use the provided ground stakes to anchor the base of the inflatable frame to the ground. Attach the fixed ropes to the designated loops on the frame and secure them to additional ground stakes, pulling them taut at an angle to provide stability against wind.
    7. Image showing the LENSUN inflatable projector screen set up outdoors, with ground stakes and ropes used to secure it for strong stability.

    Image 4.2: Securing the inflatable screen with ground stakes and ropes.

5. Operating Instructions

The LENSUN 14FT Inflatable Projector Screen is designed for versatile projection.

  • Projection Type: This screen supports both front and rear projection. For front projection, place the projector in front of the screen. For rear projection, place the projector behind the screen.
  • Blower Operation: The integrated blower must remain on continuously to keep the screen inflated during use. The blower is designed for quiet operation to minimize disturbance to your viewing experience.
  • Aspect Ratio: The screen features a 16:9 aspect ratio, suitable for most modern projectors and media content.
The LENSUN inflatable projector screen displaying a scenic beach image with '16:9 Aspect Ratio' text overlay, set up by a pool.

Image 5.1: The screen supports a 16:9 aspect ratio.

6. Maintenance

Proper care extends the life of your inflatable projector screen.

  • Cleaning the Screen: The projection screen material is made of natural polyester and is wrinkle-resistant. If cleaning is necessary, gently wipe with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive materials.
  • Cleaning the Frame: The inflatable frame can be wiped clean with a damp cloth. Ensure it is completely dry before storage.
  • Blower Care: Keep the blower motor's air intake free from debris. Do not immerse the blower in water.

7. Storage

To store the screen:

  1. Deflation: Unplug the blower motor. Locate the deflation zipper(s) on the inflatable frame and open them. The screen will deflate.
  2. Remove Screen: Detach the projection screen from the inflatable frame. Fold the projection screen neatly to prevent creases.
  3. Fold Frame: Once the inflatable frame is fully deflated, fold it carefully to remove any remaining air and reduce its size.
  4. Pack: Place the folded screen, frame, blower, stakes, and ropes into the provided carry bag.
    5. Image showing the blower motor and the carry bag for the LENSUN inflatable projector screen, highlighting its portability and quick inflation.

    Image 7.1: The blower and carry bag facilitate quick inflation and easy storage.

  5. Store: Store the carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

Refer to this section for solutions to common issues.

ProblemPossible CauseSolution
Screen does not inflate or inflates slowly.Blower not plugged in; air intake blocked; deflation zipper open; puncture in frame.Ensure blower is plugged in and switched on. Check air intake for obstructions. Close all deflation zippers. Inspect frame for punctures and repair if necessary.
Screen is wobbly or unstable.Insufficient anchoring; strong winds.Ensure all ground stakes are firmly in place and ropes are taut. Add additional weights if needed. Do not use in excessively windy conditions.
Wrinkles on projection surface.Screen not attached tautly; improper folding during storage.Re-attach the projection screen, ensuring it is stretched tightly across the frame. Fold the screen carefully for storage. Minor wrinkles typically do not affect projection quality significantly.

9. Specifications

  • Model: 14FT
  • Brand: LENSUN
  • Display Dimensions: 122"W x 107"H
  • Overall Product Dimensions: Approximately 10ft (Width) x 8.2ft (Height) x 4ft (Depth)
  • Material: Polyester (Screen), Durable 600DD Polyester Fabric (Frame)
  • Aspect Ratio: 16:9
  • Mounting Type: Ground Mount
  • Item Weight: 11.81 pounds
  • Manufacturer: LENSUN

10. Warranty and Support

LENSUN provides the following support for your 14FT Inflatable Projector Screen:

  • Return Policy: 30-day return policy.
  • Warranty: 12-month warranty.
  • Customer Support: Lifetime customer support.

For any inquiries or assistance, please contact LENSUN customer service through the retailer where the product was purchased.

© 2023 LENSUN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.