BindMaster 16/3 3-Outlet Indoor/Outdoor Extension Cord, 25 Feet - User Manual

1. Product Overview

This manual provides instructions for the BindMaster 16/3 3-Outlet Indoor/Outdoor Extension Cord, Model Q25B. This extension cord is designed for both indoor and outdoor use, featuring a 16-gauge, 3-wire construction and three grounded outlets. It is UL Listed, ensuring compliance with safety standards.

Image shows the BindMaster 25-foot black extension cord, coiled, with its three-outlet end and single plug end visible.

2. Important Safety Information

Read and understand all safety instructions before using this product. Failure to follow these instructions may result in fire, electric shock, or injury.

• Do not overload: Ensure the total wattage of connected devices does not exceed the cord's maximum capacity. Refer to the specifications section for details.
• Indoor/Outdoor Use: While rated for outdoor use, protect the outlet end from direct exposure to water or moisture.
• Grounding: Always connect the extension cord to a properly grounded 3-prong outlet. Do not remove the grounding prong.
• Inspection: Before each use, inspect the cord for any signs of damage, cuts, fraying, or exposed wires. Do not use a damaged cord.
• Placement: Do not run the cord through doorways, windows, walls, ceilings, or floors. Avoid placing the cord under rugs, carpets, or furniture, as this can cause overheating and damage.
• Uncoil Completely: Always uncoil the extension cord completely before use to prevent overheating.
• Disconnect When Not in Use: Unplug the extension cord from the power source when not in use.
• Children and Pets: Keep extension cords out of reach of children and pets.

3. Setup Instructions

1. Unpack: Carefully remove the extension cord from its packaging.
2. Inspect: Visually inspect the entire length of the cord, including the plug and outlet ends, for any damage. If damage is found, do not use the cord.
3. Uncoil: Fully uncoil the extension cord to its entire length before plugging it in or connecting any devices.
4. Connect to Power Source: Plug the extension cord's male plug into a standard 125V AC, 3-prong grounded wall outlet.
5. Connect Devices: Plug your devices into the three available outlets on the extension cord. Ensure that the total power draw of all connected devices does not exceed the cord's rated capacity.

4. Operating Instructions

Once the extension cord is properly set up and connected, operate it as follows:

• Power On/Off: If your model includes an integrated on/off switch, use it to control power to the connected devices.
• Monitor Load: Avoid connecting high-power appliances simultaneously if their combined wattage exceeds the cord's rating.
• Outdoor Use: When used outdoors, ensure the cord is placed in a manner that minimizes exposure to standing water or heavy rain, especially the outlet end.

5. Maintenance

Proper maintenance ensures the longevity and safe operation of your extension cord:

• Regular Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage. Replace the cord immediately if any damage is observed.
• Cleaning: Disconnect the cord from the power source before cleaning. Wipe the cord with a dry, clean cloth. Do not use liquid cleaners or immerse the cord in water.
• Storage: When not in use, coil the cord neatly and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Avoid tight coiling that can stress the wire.

6. Troubleshooting

If you encounter issues with your extension cord, refer to the following common troubleshooting steps:

• No Power to Devices:
  • Ensure the extension cord is fully plugged into a working wall outlet.
  • Check if the wall outlet itself is receiving power (test with another device).
  • Verify that the devices are properly plugged into the extension cord outlets.
  • If your cord has an on/off switch, ensure it is in the 'ON' position.
  • Inspect the cord for visible damage.
• Cord or Plugs Feel Warm:
  • Disconnect all devices immediately.
  • Reduce the total load by unplugging some devices. The cord may be overloaded.
  • Ensure the cord is fully uncoiled.
  • If the cord continues to overheat with a reduced load, discontinue use and replace it.

7. Specifications

8. Warranty and Support

For specific warranty details regarding your BindMaster extension cord, please refer to the product packaging or contact BindMaster customer support directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

For technical assistance, troubleshooting not covered in this manual, or customer service inquiries, please contact BindMaster customer support through their official website or the contact information provided with your purchase.