1. Introduction
Thank you for choosing the Master 30 Inch Portable Professional Massage Table. This manual provides detailed instructions for the safe and effective use, setup, and maintenance of your new massage table. Designed for professionals, this lightweight and adjustable table offers superior comfort and durability for various applications including massage, beauty, tattoo, SPA, and therapy.
2. Safety Information
- Always ensure the table is set up on a stable, level surface before use.
- Do not exceed the maximum weight capacity of 650 lbs (295 kg).
- Keep hands and fingers clear of moving parts, especially during folding and unfolding.
- Regularly inspect all components for wear, damage, or loose connections. Do not use the table if any part is damaged.
- Keep children and pets away from the table during setup and use.
- Use only Master Massage Equipment approved accessories.
3. Package Contents
Verify that all items are present in your package:
- Master 30 Inch Portable Massage Table
- Ergonomic Dream™ Face Cradle
- Round Comfort Face Pillow
- Contoured Armrest Support
- Two-Pocket Carrying Case
4. Setup Instructions
The Master Portable Massage Table requires minimal assembly. Follow these steps for quick and easy setup:
- Unfolding the Table:
Place the folded table on its side on a flat surface. Release the latches on the side of the table. Gently open the table until it lies flat. The legs will automatically swing out. Ensure all leg braces are fully extended and locked into place for stability. - Adjusting Table Height:
The table height can be adjusted from 24 inches to 34 inches. Each leg features numbered adjustment holes. To adjust, loosen the Quik-Set™ knobs on each leg, slide the inner leg to the desired height aligning the numbered holes, and securely tighten the knobs. Ensure all four legs are adjusted to the same height for stability. - Attaching Face Cradle and Armrest:
Insert the face cradle rods into the designated ports at one end of the table. Secure the face cradle by tightening the locking screws. Place the round comfort face pillow onto the face cradle. Attach the contoured armrest support to the face cradle assembly as shown in the diagram. - Shiatsu Cable Release System:
This table features a Shiatsu Cable Release System, allowing the cables to be easily detached for floor work or specific massage techniques. To engage, simply unhook the cables from their anchor points. Reattach them securely when finished.
Figure 4.1: Leg height adjustment mechanism with numbered holes.
Figure 4.2: Proper attachment of the face cradle and armrest.
Figure 4.3: View of the table's underside, highlighting the Shiatsu cable release.
Figure 4.4: Overall dimensions of the Master Massage Table.
5. Operating Instructions
Once assembled, your Master Massage Table is ready for use. Ensure the client is positioned comfortably and safely on the table. The Multi-Layer Small Cell™ foam provides enhanced comfort and support.
Figure 5.1: The Master Portable Massage Table ready for use.
For optimal client comfort, ensure the face cradle and armrest are adjusted to suit their needs. The table's robust construction, including aircraft-grade steel support cables and Duo-Plane™ hinges, ensures stability during various treatments.
6. Maintenance
Proper maintenance will extend the life of your massage table:
- Cleaning: Wipe the table's upholstery with a dry cloth after each use. For deeper cleaning, use a mild soap and water solution. The PU leather is oil and water-resistant. Avoid harsh chemicals or abrasive cleaners that may damage the upholstery.
- Storage: When not in use, fold the table and store it in its carrying case to protect it from dust and damage. Store in a cool, dry place away from direct sunlight.
- Inspection: Periodically check all nuts, bolts, and hinges to ensure they are tight and secure. Inspect the upholstery for any tears or punctures.
Figure 6.1: Folded massage table for easy storage and transport.
7. Troubleshooting
If you encounter issues with your massage table, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table feels unstable or wobbly. | Legs not fully extended or locked; uneven leg height; loose knobs. | Ensure all leg braces are fully extended and locked. Verify all legs are set to the same height and Quik-Set™ knobs are securely tightened. |
| Difficulty folding/unfolding the table. | Latches not fully released; leg braces catching. | Ensure latches are completely disengaged. Gently guide the legs and braces to prevent catching. Do not force the table. |
| Face cradle or armrest is loose. | Locking screws not tightened. | Tighten the locking screws on the face cradle rods and armrest support until secure. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 37 x 9 x 31 inches (folded) |
| Tabletop Dimensions (L x W) | 84 x 30 inches (unfolded) |
| Adjustable Height Range | 24 - 34 inches |
| Item Weight | 50 pounds |
| Material | Wood (Northern hardwood legs), PU Leather upholstery |
| Color | Blue |
| Weight Capacity | 650 lbs (working weight) |
| Product Care Instructions | Wipe with Dry Cloth |
| Model Number | Del Ray Massage Tables |
| UPC | 841930123847 |
9. Warranty and Support
Master Massage Equipment stands behind the quality of its products. The PU leather upholstery comes with a 5-year promise for durability and resistance to oil and water.
For any product inquiries, technical support, or to explore additional accessories, please visit the official Master Massage Equipment store:
Visit the Master Massage Equipment Store
Extended protection plans may also be available for purchase to provide additional coverage beyond the manufacturer's promise.