AKT1 Sport StrikePRO HTBT Bluetooth Headphones User Manual

Introduction

Thank you for choosing the AKT1 Sport StrikePRO HTBT Bluetooth Headphones. These advanced in-ear hearing protection devices are designed to provide superior sound isolation, situational awareness through Hear Through technology, and Bluetooth connectivity for communication and entertainment. Ideal for shooting, hunting, and various DIY projects, the StrikePRO HTBT ensures your hearing is protected while keeping you connected to your environment.

Product Overview

What's Included

Your AKT1 Sport StrikePRO HTBT package includes the following components:

• AKT1 Sport StrikePRO HTBT Earbuds
• AKT1 Sport Challenge Coin
• Multiple sizes of Foam Ear Tips (S, M, L)
• Multiple sizes of Silicon Ear Tips (S, M, L)
• Protective Carry Case
• Type-C USB Charging Cable
• User Manual (this document)

Image: All components included with the AKT1 Sport StrikePRO HTBT headphones, neatly laid out.

Key Features

The StrikePRO HTBT headphones are engineered with advanced features for optimal performance:

• All-In-One IN-EAR Hearing Protection: Designed to protect your hearing in loud environments.
• 29 NRR (Noise Reduction Rating): Provides significant noise attenuation to safeguard your ears.
• Bluetooth 5.0 Connectivity: For seamless wireless connection to your devices.
• Hear Through Technology: Allows you to hear ambient sounds and conversations while maintaining hearing protection.
• Transparency Mode: Enhances situational awareness by allowing safe sounds to pass through.
• 4x Sound Amplification: Amplifies low-level sounds for improved awareness and communication.
• 10+ Hour Operational Battery Life: Extended use on a single charge.

Image: The AKT1 Sport StrikePRO HTBT Bluetooth Headphones, showcasing their design and inline controls.

Setup

1. Charging the Headphones

Before first use, fully charge your StrikePRO HTBT headphones. Connect the supplied Type-C USB charging cable to the charging port on the inline control unit and plug the other end into a USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status and turn off when fully charged.

2. Ear Tip Selection and Installation

Proper ear tip selection is crucial for both hearing protection and sound quality. The package includes foam and silicon ear tips in Small (S), Medium (M), and Large (L) sizes. Experiment with different sizes to find the best fit for your ears. A good seal is essential for achieving the advertised 29 NRR.

1. Gently remove the pre-installed ear tips from the earbuds.
2. Select a pair of ear tips that feel comfortable and create a snug seal in your ear canal. For foam tips, compress them before inserting into your ear.
3. Carefully push the new ear tips onto the earbud nozzles until they are securely attached.

3. Pairing with a Bluetooth Device

To connect your StrikePRO HTBT headphones to your smartphone or other Bluetooth-enabled device:

1. Ensure the headphones are turned off.
2. Press and hold the Multi-function Button (usually the center button on the inline control) for approximately 5-7 seconds until the LED indicator flashes blue and red alternately. This indicates pairing mode.
3. On your device, go to Bluetooth settings and enable Bluetooth.
4. Search for available devices. You should see "AKT1 Sport StrikePRO HTBT" or a similar name appear in the list.
5. Select the headphones from the list to connect. Once connected, the LED indicator will flash blue slowly, and you may hear an audible confirmation.
6. If prompted for a passcode, enter "0000".

The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Power On/Off

• Power On: Press and hold the Multi-function Button for 3 seconds until the LED flashes blue.
• Power Off: Press and hold the Multi-function Button for 3 seconds until the LED flashes red and then turns off.

Volume Control

• Increase Volume: Press the + button.
• Decrease Volume: Press the - button.

These controls adjust the volume for both Bluetooth audio and the Hear Through/amplification modes.

Hear Through / Transparency Mode

The Hear Through feature allows you to hear ambient sounds and conversations while still benefiting from hearing protection. This mode also provides 4x sound amplification for improved situational awareness.

• Activate/Deactivate Hear Through: Press the dedicated Hear Through button (often located near the volume controls). The LED indicator may change color or flash to indicate the mode is active.
• When Hear Through is active, loud impulse noises (like gunshots) will be instantly attenuated to a safe level, while normal sounds are amplified.

Bluetooth Audio Playback and Calls

• Play/Pause: Press the Multi-function Button once.
• Next Track: Press and hold the + button.
• Previous Track: Press and hold the - button.
• Answer/End Call: Press the Multi-function Button once during an incoming call.
• Reject Call: Press and hold the Multi-function Button for 2 seconds during an incoming call.
• Redial Last Number: Double-press the Multi-function Button.

Maintenance

Cleaning

• Regularly clean the ear tips with a damp cloth and mild soap. Ensure they are completely dry before reattaching.
• Wipe the earbuds and inline control unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the microphone ports are clear of debris for optimal Hear Through performance.

Storage

When not in use, store your StrikePRO HTBT headphones in the provided protective carry case to prevent damage and keep them clean. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Battery Care

• Avoid fully discharging the battery frequently.
• If storing for an extended period, charge the battery to about 50% every few months to maintain battery health.
• Use only the supplied charging cable or a certified Type-C USB cable.

Troubleshooting

If you encounter issues with your AKT1 Sport StrikePRO HTBT headphones, please refer to the table below for common problems and solutions:

Specifications

Warranty and Support

AKT1 Sport stands behind the quality of its products. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official AKT1 Sport website. If you require technical assistance or have questions not covered in this manual, please contact AKT1 Sport customer support.

You can find more information and contact details on the AK AKT1 Sport Store on Amazon.