VASAGLE ULGT024A01 51.2 Inch Console Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, use, and maintenance of your VASAGLE 51.2 Inch Console Table. Please read all instructions carefully before assembly and retain this manual for future reference.

Image: The VASAGLE 51.2 Inch Console Table, showcasing its metallic gold frame and transparent tempered glass shelves.

Safety Information

• Children should not climb or play on this console table for safety reasons.
• For added safety, please attach the console table to the wall using the included anti-tip kit.
• Ensure all screws are tightened securely during assembly.
• Do not exceed the maximum static load capacity of 88 lb (40 kg).

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged:

• 1 x Console Table (components for frame and shelves)
• 1 x Anti-Tip Kit
• 1 x Accessory Kit (screws, Allen wrench, etc.)
• 1 x Instructions Manual

Assembly Instructions

Assembly of this console table is designed to be straightforward. It is recommended that two people assemble this product.

Assembly Video Guide

Video: An official seller video demonstrating the assembly process for a similar console table, titled "No sweat if you're not techy, we'll get you set up easy". This video provides a visual guide to help with installation.

Step-by-Step Assembly

1. Unpack and Identify Parts: Lay out all components on a soft, clean surface. Refer to the hardware list and diagrams to identify each part.


Image: Diagram showing the hardware list, including screws and tools required for assembly.

2. Assemble the Side Frames: Connect the vertical frame pieces (A) to the horizontal base pieces (B) using the provided screws (1) and Allen wrench. Ensure they are securely fastened but do not overtighten initially.


Image: Diagram illustrating the first step of assembly, connecting frame components.

3. Connect the Side Frames: Attach the long connecting bars (D) between the two assembled side frames (A and B) using screws (1). This forms the main structure of the table.


Image: Diagram showing the connection of the side frames to form the table's length.

4. Install the Top Frame: Secure the top frame pieces (E) to the vertical supports using screws (1). Ensure all connections are firm.


Image: Diagram detailing the installation of the upper frame section.

5. Place Buffer Pads: Insert the provided buffer pads (2) into the designated holes on the frame where the glass shelves will rest. These pads help prevent the glass from shifting and reduce noise.


Image: Diagram showing the placement of small buffer pads on the frame.

6. Insert Glass Shelves: Carefully place the tempered glass shelves (F and G) onto the frame, ensuring they rest securely on the buffer pads. The largest glass panel is for the top (F), and the smaller ones are for the lower shelves (G).


Image: Diagram illustrating the careful placement of the glass shelves onto the assembled frame.

7. Final Tightening and Leveling: Once all parts are in place, fully tighten all screws. Adjust the leveling feet on the bottom of the table to ensure stability on uneven floors.


Image: A close-up view of the adjustable feet, which can be rotated to stabilize the table on uneven surfaces.

Product Features

• Elegant Design: Features transparent tempered glass shelves and a metallic gold metal frame, ideal for displaying decorative items.


Image: The console table positioned in a living room, demonstrating its elegant appearance and suitability for displaying various items.

• Versatile Placement: Slim design (11.8"D x 51.2"W x 28.7"H) allows for seamless integration into entryways, living rooms, bedrooms, or behind sofas.


Image: A diagram illustrating the precise dimensions of the console table, highlighting its slim profile.

• Durable Construction: Built with 5 mm thick tempered glass and a sturdy steel frame, supporting up to 88 lb (40 kg).


Image: A close-up shot emphasizing the 0.2-inch thickness of the tempered glass shelves, indicating durability.

• Stability and Noise Reduction: Equipped with 4 adjustable feet for stability on uneven surfaces and buffer pads for noise reduction when placing items on glass.

Video: An official seller video showcasing the features of a 3-tier console table, including its design and stability.

Care and Maintenance

• Cleaning: Wipe the glass surfaces and metal frame with a damp cloth. Avoid abrasive cleaners that may scratch the finish.


Image: A hand wiping the glass surface of the console table with a blue cloth, demonstrating ease of cleaning.

• Avoid Harsh Chemicals: Do not use strong chemical cleaners on any part of the table.
• Regular Inspection: Periodically check all screws and connections to ensure they remain tight.

Troubleshooting

• Wobbly Table: If the table is wobbly after assembly, ensure all screws are fully tightened. Use the adjustable feet on the bottom of the legs to level the table on uneven floor surfaces.
• Parts Missing or Damaged: If any parts are missing or damaged upon arrival, please contact customer support for assistance.
• Difficulty with Assembly: Review the assembly video and step-by-step instructions. Ensure parts are oriented correctly before tightening screws. Do not force components together.

Specifications

Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please contact VASAGLE customer service through the retailer where the product was purchased. Please have your model number (ULGT024A01) and purchase details ready.