bseah Grow Light for Indoor Plants (2 Tubes) - User Manual

Introduction

Thank you for choosing the bseah Grow Light for your indoor plants. This full-spectrum LED grow light is designed to provide optimal lighting conditions for various plant growth stages, from seeding to fruiting. Featuring adjustable light modes, dimmable brightness, and an automatic timer, this product offers a convenient and effective solution for nurturing your plants.

Key Features

• Full Spectrum LED: Combines yellow and white LEDs to promote photosynthesis, germination, growth, flowering, and fruiting.
• Automatic Timer Function: Features a cycle memory timer with settings for 3, 9, or 12 hours. Once set, the light will automatically turn on and off at the same time daily.
• 10 Dimmable Modes: Adjust light intensity to meet the specific needs of plants at different stages.
• 3 Switch Modes: Offers different light spectrum combinations (Yellow, White, Yellow & White) for versatile plant care.
• Strong and Stable Design: Equipped with a metal gooseneck and a non-slip mat clamp for secure positioning.
• USB Connector: Convenient power source for flexible use.
• Long Lifespan: LEDs are tested for a lifetime of up to 50,000 hours.

Product Overview

Setup Instructions

1. Unpack Components: Carefully remove the grow light, USB adapter, and instruction manual from the packaging.
2. Attach the Clamp: Securely attach the clamp to a stable surface such as a desk, shelf, or windowsill. Ensure the surface thickness does not exceed 2.5 inches (6.35 cm) for optimal grip. The clamp features non-slip pads to prevent damage and ensure stability.
3. Position the Lights: Adjust the flexible gooseneck arms to direct the LED light bars towards your plants. The arms can be rotated 360 degrees to cover a wide area or focus on specific plants.
4. Connect Power: Plug the USB connector into the provided high-efficiency USB adapter, then plug the adapter into a standard electrical outlet.

Operating Instructions

The bseah Grow Light features an inline control panel for easy operation. Refer to Figure 5 for button identification.

Power On/Off

Press the Power Button (red icon) to turn the grow light on or off.

Adjusting Brightness (Dimming)

Use the + and - buttons to cycle through 10 dimmable brightness levels, from 10% to 100% intensity.

Changing Light Spectrum (Switch Modes)

Press the Spectrum Button (circular arrow icon) to switch between three light modes:

• Yellow Light: Ideal for general growth and flowering.
• White Light: Suitable for germination and early growth.
• Yellow & White Combination: Provides full spectrum light for all growth stages.

Setting the Timer

Press the Timer Button (clock icon) to select a desired lighting duration: 3 hours, 9 hours, or 12 hours. Once a timer is set, the light will automatically turn on and off at the same time every day. The timer indicator light will illuminate to confirm the setting.

Maintenance

• Cleaning: Ensure the grow light is unplugged before cleaning. Gently wipe the LED light bars and gooseneck arms with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or immerse the unit in water.
• Storage: If not in use for an extended period, unplug the grow light and store it in a cool, dry place away from direct sunlight.
• Cable Care: Avoid bending or twisting the power cable excessively to prevent damage.

Troubleshooting

Light does not turn on:

• Ensure the USB adapter is securely plugged into a working electrical outlet.
• Check that the USB connector is firmly inserted into the adapter.
• Press the Power Button on the inline control panel.

Timer function is not working:

• Verify that the grow light has continuous power supply. The timer relies on consistent power to maintain its cycle.
• Ensure the Timer Button has been pressed and the corresponding indicator light is on.

Light intensity is too low/high:

• Use the + and - buttons on the control panel to adjust the brightness to your desired level.

Gooseneck arms do not hold position:

• Ensure the clamp is securely fastened to a stable surface.
• Adjust the gooseneck arms carefully. While flexible, they are designed to hold position once set.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official bseah website. Keep your purchase receipt for warranty claims.