1. Product Overview
The TAMASHII NATIONS S.H.Figuarts Captain America (Avengers Assemble) Edition action figure is a highly detailed collectible. This figure features Captain America in his battle-worn outfit, designed to recreate dramatic moments from the film. It includes various interchangeable parts for dynamic posing and display.
Image 1.1: Front view of the Captain America action figure with damaged shield.
2. Safety Information
WARNING: CHOKING HAZARD. This product contains small parts and is not suitable for children under 12 years of age. Keep all small components away from young children to prevent accidental ingestion.
3. Package Contents
Verify that all components listed below are present in your package:
- Main body of Captain America figure
- Three (3) optional head sculpts
- One (1) optional collar piece
- Five (5) left optional hands
- Seven (7) right optional hands
- One (1) standard shield
- One (1) damaged shield
4. Setup and Assembly
Follow these steps to set up your Captain America action figure:
- Unpacking: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
- Attaching Heads: To change the head sculpt, gently pull the current head straight up from the neck joint. Align the desired optional head with the neck joint and press down firmly until it is securely attached.
- Changing Hands: To replace hands, gently pull the existing hand from the wrist joint. Select the desired optional hand and push it onto the wrist joint until it is secure. Apply gentle, even pressure to avoid damage.
- Attaching Collar: The optional collar can be placed around the neck area to enhance certain poses or head sculpts.
- Equipping Shields: The figure comes with two shields: a standard shield and a battle-damaged shield. Either shield can be attached to the figure's left arm via the designated peg on the shield and corresponding hole on the arm.
Image 4.1: Rear view of the figure, showing shield attachment point.
Image 4.2: Example of figure posing with interchangeable parts.
5. Operating and Posing
The S.H.Figuarts Captain America figure features extensive articulation for a wide range of dynamic poses.
- Joint Movement: Gently manipulate the joints at the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles to achieve desired poses. Avoid forcing joints beyond their natural range of motion to prevent breakage.
- Accessory Use: Utilize the various optional hands to hold the shield or express different actions, such as the pointing finger hand for commanding poses.
- Recreating Scenes: The figure's design and accessories allow for recreating iconic moments from the Avengers films. Consider combining with other figures (sold separately) for larger displays.
Image 5.1: Dynamic posing example with shield.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your action figure.
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, lightly dampen the cloth with water; avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep it in a stable position to avoid accidental falls.
- Joint Care: If joints become stiff, apply a very small amount of silicone-based lubricant (specifically designed for plastics) to the joint. If joints become loose, they may require a thin layer of clear nail polish or a similar product to add friction, applied carefully and allowed to dry completely.
- Handling: Always handle the figure by its main body parts, avoiding excessive pressure on small or delicate accessories.
7. Troubleshooting
Refer to the following common issues and solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Difficulty changing parts (heads, hands) | Tight joints or improper alignment. | Apply gentle, even pressure. If very stiff, carefully warm the joint slightly with warm water or a hairdryer on low setting (briefly) to soften the plastic, then try again. Ensure correct alignment before pushing. |
| Loose joints | Wear over time or manufacturing tolerance. | Apply a thin layer of clear nail polish or a similar friction-adding agent to the ball joint or peg, allow to dry completely, then reassemble. Repeat if necessary. |
| Figure does not stand stably | Improper weight distribution or loose ankle/hip joints. | Adjust the pose to balance the figure. Ensure feet are flat on the surface. If joints are loose, refer to the "Loose joints" solution above. A display stand (sold separately) can provide additional stability. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6 x 1.5 x 5.9 inches (approximate) |
| Item Weight | 0.035 ounces (approximate) |
| Model Number | BAS61284 |
| Manufacturer Recommended Age | 12 years and up |
| Batteries Required | No (1 A battery mentioned in product data is likely an error or for a different variant, as action figures typically do not require batteries unless specified for lights/sounds, which is not the case here.) |
| Material | PVC, ABS (typical for S.H.Figuarts) |
9. Warranty and Support
For product support and assistance within the United States, ensure your product was shipped from within North America by authorized U.S. Retailers. The product box should feature a Bluefin / Bandai Namco warning label, which confirms an officially licensed Bandai product distributed by its sole and authorized distributor (Bluefin) for the U.S. Markets. This label also entitles the purchaser to product support assistance.
Specific warranty details may vary by region and retailer. Please refer to the documentation included with your purchase or contact your point of sale for detailed warranty information.