Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Lloyd LDWF13PSE1DD 13 Place Settings Dishwasher. Please read it thoroughly before using the appliance and keep it for future reference.
The Lloyd LDWF13PSE1DD dishwasher is designed to provide a hygienic and efficient cleaning experience for your dishes. Key features include a 70°C hot wash for germ and bacteria elimination, an Extra Dry function with hot and cold air circulation for optimal drying, and 360-degree water spray arms for thorough cleaning. It also offers a Half Load program for smaller washes and a 30-minute express wash for lightly soiled items.
Front view of the Lloyd LDWF13PSE1DD 13 Place Settings Dishwasher.
Setup and Installation
1. Unpacking and Placement
- Carefully remove all packaging materials.
- Place the dishwasher on a firm, level surface. Ensure there is adequate space for door opening and proper ventilation.
- Avoid placing the dishwasher near heat sources or in direct sunlight.
2. Water and Electrical Connections
- Connect the water inlet hose to a cold water supply with a minimum pressure of 0.04 MPa and a maximum of 1 MPa.
- Connect the drain hose to a suitable drain pipe, ensuring it is not kinked or obstructed.
- Plug the dishwasher into a grounded electrical outlet (230 Volts, 50 Hz). Ensure the electrical supply matches the appliance's requirements.
3. First Use Preparation
- Fill the Salt Dispenser: Remove the cap of the salt dispenser located at the bottom of the dishwasher. Using the provided funnel, add dishwasher salt until the dispenser is full. Add water until it overflows, then replace the cap tightly.
- Fill the Rinse Aid Dispenser: Open the rinse aid dispenser cover. Pour rinse aid into the dispenser until it reaches the maximum level indicator. Close the cover securely.
Operating Instructions
1. Loading the Dishwasher
Proper loading is crucial for effective cleaning. The dishwasher has a capacity of 13 place settings.
- Scrape off large food particles from dishes before loading.
- Place larger items like pots, pans, and serving dishes in the lower rack.
- Load glasses, cups, and smaller plates in the upper rack.
- Ensure that items do not block the spray arms from rotating freely.
- Place cutlery in the cutlery basket with handles down for forks and spoons, and handles up for knives for safety.
Interior view showing proper loading of dishes in the dishwasher racks.
2. Adding Detergent
- Open the detergent dispenser.
- Add the recommended amount of dishwasher detergent (powder, gel, or tablet) into the main wash compartment.
- Close the dispenser cover firmly until it clicks.
3. Selecting a Wash Program
The dishwasher offers various wash programs to suit different needs:
Control panel displaying various wash program options.
- Intensive (70°C): For heavily soiled dishes, pots, and pans.
- Normal: For normally soiled dishes.
- Eco: Energy-saving program for normally soiled dishes.
- Glass: For delicate glassware.
- 30 Minute Express Wash: For lightly soiled dishes that need quick cleaning.
- Pre-wash: For rinsing dishes that will be washed later.
- Half Load: Use this option when the dishwasher is not fully loaded to save water and energy.
To select a program, press the Program button repeatedly until the desired program indicator lights up on the LED display.
4. Special Functions and Indicators
Control panel showing various indicators and function buttons.
- Delay Start (1-24 Hours): Allows you to postpone the start of a wash cycle. Press the Delay button to set the desired delay time.
- LED Display: Shows remaining time, error codes, and program status.
- Salt Refill Indicator: Illuminates when the dishwasher salt needs to be refilled.
- Rinse Aid Indicator: Illuminates when rinse aid needs to be refilled.
- Error Indicator: Illuminates to indicate a malfunction or error. Refer to the troubleshooting section.
- Drying Progress Indicator: Shows the current stage of the drying cycle.
- Child Lock: Activates to prevent accidental changes to settings during operation.
- Extra Dry: Enhances drying performance, especially for plastic items.
5. Starting and Stopping a Cycle
- Close the dishwasher door firmly.
- Press the Start/Pause button to begin the selected program.
- To pause a cycle, open the door slightly or press the Start/Pause button. To resume, close the door and press Start/Pause again.
- To cancel a cycle, press and hold the Start/Pause button for a few seconds.
Maintenance and Care
Regular maintenance ensures optimal performance and longevity of your dishwasher.
1. Cleaning the Filters
- The filter system consists of a coarse filter, a main filter, and a micro filter.
- Twist the coarse filter counter-clockwise and lift out the filter assembly.
- Rinse all filter components under running water to remove food particles. Use a soft brush if necessary.
- Reassemble the filters and place them back into the dishwasher, twisting clockwise until secure. Clean filters regularly, ideally after every few washes.
2. Cleaning the Spray Arms
- Periodically check the spray arm nozzles for blockages.
- If necessary, remove the spray arms (they can usually be unclipped or unscrewed) and clean the nozzles with a thin wire or toothpick.
- Rinse thoroughly and reattach, ensuring they can rotate freely.
3. Exterior and Interior Cleaning
- Wipe the exterior of the dishwasher with a damp cloth and mild detergent. Do not use abrasive cleaners.
- Clean the door seal regularly to remove food residue and grime.
- Run a dishwasher cleaning cycle with a specialized dishwasher cleaner periodically to remove grease and limescale buildup.
4. Winterizing (Storage)
- If the dishwasher will be stored in an unheated area during winter, drain all water from the appliance to prevent freezing damage.
- Disconnect water and power supplies.
Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power cord not plugged in; Door not closed properly; Fuse blown; Water supply turned off. | Check power connection; Ensure door is latched; Check household fuse/circuit breaker; Turn on water supply. |
| Dishes are not clean | Improper loading; Insufficient detergent; Clogged spray arms; Incorrect program selected; Clogged filters. | Reload dishes correctly; Add more detergent; Clean spray arm nozzles; Select appropriate program; Clean filters. |
| Water not draining | Clogged drain hose; Clogged filters; Drain pump malfunction. | Check and clear drain hose; Clean filters; Contact service if pump is faulty. |
| White spots on dishes | Hard water; Insufficient rinse aid; Too much detergent. | Refill dishwasher salt; Adjust rinse aid dosage; Use less detergent. |
| Error Indicator (e.g., E1, E4) | Water inlet/drain issue; Sensor fault. | Check water supply and drain; Consult the full manual for specific error codes or contact service. |
Specifications
Detailed technical specifications for the Lloyd LDWF13PSE1DD Dishwasher:
Diagram illustrating the dimensions of the Lloyd LDWF13PSE1DD Dishwasher.
| Feature | Detail |
|---|---|
| Model | LDWF13PSE1DD |
| Brand | Lloyd |
| Capacity | 13 Place Settings |
| Installation Type | Freestanding |
| Product Dimensions (LxWxH) | 59.8 x 60 x 84.5 Centimeters |
| Item Weight | 39 kg |
| Colour | Silver |
| Material | Stainless Steel |
| Noise Level | 52 Decibels |
| Voltage | 230 Volts |
| Wattage | 2100 Watts |
| Energy Efficiency | A++ |
| Annual Energy Consumption | 1.6 Kilowatt Hours |
| Cycle Options | Intensive, Half Load, Quick (and others as described) |
| Display Type | LED |
| Special Features | 360 Degree Water Spray, 70 Deg Intensive Wash, Extra Dry, Foldable Baskets, Half Load |
| Included Components | 1 N User Manual, 1 N Salt Funnel, 1 N Start Up Kit, 1 N Cutlery Basket |
Warranty Information
Your Lloyd LDWF13PSE1DD Dishwasher comes with a 2 Year Warranty Care. This warranty covers manufacturing defects and ensures repair or replacement of faulty parts under normal use conditions. Please retain your purchase receipt as proof of purchase for warranty claims.
For detailed terms and conditions of the warranty, please refer to the warranty card included with your product or contact Lloyd customer service.
Customer Support
For any technical assistance, service requests, or inquiries regarding your Lloyd LDWF13PSE1DD Dishwasher, please contact Lloyd customer support.
- Manufacturer: LLOYD, N.A.
- Refer to the contact information provided in your product's included user manual or visit the official Lloyd website for the most up-to-date support details.
- When contacting support, please have your model number (LDWF13PSE1DD) and purchase date readily available.