SONGMICS LSD012B02
SONGMICS Electric Height Adjustable Desk
Model: LSD012B02
1. Introduction
Thank you for choosing the SONGMICS Electric Height Adjustable Desk. This desk is designed to provide a versatile and ergonomic workspace, allowing you to easily switch between sitting and standing positions. Its robust construction and smooth operation make it an ideal choice for any home or office environment.
This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new desk. Please read it thoroughly before use and retain it for future reference.

Image: The SONGMICS Electric Height Adjustable Desk, featuring a black tabletop and sturdy black steel legs.
2. Important Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not overload the desk: The maximum static load capacity is 80 kg. Exceeding this weight can cause instability and damage.
- Ensure stability: Always ensure the desk is stable when adjusting its height.
- Cleaning: Clean the surface with a dry cloth only. Avoid liquid contact with electronic components.
- Assembly: Follow the provided assembly instructions carefully to avoid potential hazards.
- Initial Use/Power Outage: Reset the system according to instructions during first use or after a power outage during height adjustment.
- Obstacle Clearance: Ensure no obstacles are around the desk during height adjustment. Verify the tabletop does not contact walls and cables are long enough for free movement.
- Indoor Use: Use the product indoors in a dry environment.
- Motor Protection: After continuous adjustment for 2 minutes, allow at least 18 minutes of rest to prevent motor damage.
- Under-desk Clearance: Do not place objects taller than 50 cm under the table to prevent damage during adjustment.
- Unauthorized Disassembly: Do not disassemble any parts without authorization.
3. Package Contents
Your SONGMICS Electric Height Adjustable Desk package should contain the following items. Please check all components upon receipt:
- 1 x Electric Desk Frame
- 1 x Tabletop (140 x 70 cm)
- 1 x Adapter
- 1 x Remote Control (Control Panel)
- 1 x Assembly Kit (Hardware and Tools)
Note: The product is delivered in two separate packages. They usually arrive at the same time. If you receive only one package, please wait for the second one.

Image: Illustration showing the desk components are shipped in two separate packages.
4. Assembly Instructions
Assembly typically takes about an hour for one person. Follow the illustrated instructions provided in the assembly kit for detailed steps. Here are general guidelines:
- Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
- Assemble Frame: Connect the electric desk frame components. Ensure the double support bars are securely attached for stability. The frame length is adjustable (115-147 cm) to fit various tabletop sizes.
- Attach Tabletop: Align the pre-drilled screw holes on the tabletop with the frame. Secure the tabletop using the provided screws.
- Install Control Panel: Mount the control panel (remote control) to the underside of the tabletop in an easily accessible location.
- Connect Wiring: Connect the motor, control panel, and power adapter according to the wiring diagram in the detailed manual. Ensure all connections are secure.
- Cable Management: Utilize the integrated cable management features, such as cable holes and hooks, to organize wires neatly.
- Adjust Feet: Ensure the adjustable feet are properly installed and adjusted to level the desk on uneven surfaces.

Image: The adjustable frame structure, designed to fit tabletops from 120-180 cm in length and 60-80 cm in width.

Image: Details such as rounded corners for safety, integrated cable management holes, and convenient cable hooks for organization.
5. Operating Instructions
The SONGMICS Electric Height Adjustable Desk allows for smooth and quiet height adjustments to suit your ergonomic needs.
5.1 Height Adjustment
- Control Panel: Use the buttons on the control panel to raise or lower the desk. The desk can be adjusted between 73 cm and 114 cm.
- Speed: The adjustment speed is approximately 25 mm/s.
- Noise Level: The motor operates quietly, with a noise level of less than 50 dB.
- Continuous Use: To protect the motor, avoid continuous adjustment for more than 2 minutes. Allow the motor to rest for at least 18 minutes after prolonged use.

Image: The desk's height adjustment range from 70 cm (sitting) to 118 cm (standing), highlighting the 25 mm/s speed and quiet operation (<50 dB).
5.2 System Reset
If the desk encounters an issue or after initial setup, a system reset may be required. Refer to your detailed assembly manual for specific reset procedures. Typically, this involves pressing and holding a designated button on the control panel until the desk moves to its lowest position and then slightly rises, indicating a successful reset.
6. Maintenance
Proper maintenance will extend the lifespan of your SONGMICS Electric Height Adjustable Desk.
- Cleaning: Wipe the tabletop and frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
- Liquid Contact: Ensure no liquids come into contact with the electronic components, including the motor, control panel, and power adapter.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure.

Image: The durable and easy-to-clean tabletop surface, resistant to spills.
7. Troubleshooting
If you encounter issues with your desk, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | No power, loose connection, or system error. | Check power cable connection. Ensure adapter is plugged in. Perform a system reset as per manual. |
| Desk moves unevenly. | Improper assembly or system synchronization issue. | Verify all assembly screws are tight. Perform a system reset to re-synchronize the motors. |
| Desk stops during adjustment. | Overload, continuous use limit reached, or obstruction. | Reduce weight on the desk. Allow motor to rest for 18 minutes if used continuously for 2 minutes. Check for obstructions under or around the desk. |
| Unusual noise during operation. | Normal operating noise or loose components. | A noise level of less than 50 dB is normal. If noise is excessive, check all connections and screws for tightness. |
If the problem persists after attempting these solutions, please contact SONGMICS customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | SONGMICS |
| Model Number | LSD012B02 |
| Product Dimensions (L x W x H) | 140 x 70 x (73-114) cm |
| Adjustable Height Range | 73-114 cm |
| Color | Black |
| Material Type | MDF Panel, Steel |
| Static Load Capacity | Up to 100 kg (Note: Safety info advises not to exceed 80kg for dynamic use) |
| Product Weight | 35 kg |
| Adjustment Speed | 25 mm/s |
| Noise Level | <50 dB |

Image: Detailed dimensions of the desk, including tabletop size and height adjustment range.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SONGMICS website. Keep your purchase receipt as proof of purchase for any warranty claims.
If you require technical assistance or have questions not covered in this manual, please contact SONGMICS customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.