1. Introduction
Thank you for choosing the ALESTOR Surge Protector. This device is designed to provide reliable power distribution and surge protection for your electronic equipment. It features 12 AC outlets and 4 USB charging ports (including one USB-C port), all protected by a 2700 Joule surge suppression system. Please read this manual carefully before use to ensure safe and optimal operation.
Image 1.1: Front view of the ALESTOR Surge Protector, showcasing its 12 AC outlets, 4 USB ports, and power switch.
2. Safety Instructions
WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:
- This product is intended for indoor use only. Do not use in wet or damp environments.
- Do not exceed the electrical ratings of 1875W/15A. Overloading the surge protector can cause overheating and fire.
- Ensure the power cord is fully inserted into a grounded wall outlet.
- Do not disassemble, modify, or attempt to repair the unit. Refer all servicing to qualified personnel.
- Keep children away from the surge protector and connected devices.
- Avoid running the power cord under carpets or in areas where it can be easily damaged.
- The unit features a 1382°F flame-retardant PC shell for enhanced safety.
Image 2.1: Close-up of the surge protector's safety indicators and heavy-duty extension cord construction.
3. Product Features
The ALESTOR Surge Protector is equipped with advanced features for comprehensive power management and protection:
- 12 AC Outlets: Provides ample space for multiple devices. Includes 2 widely spaced outlets for bulky power adapters.
- 4 USB Charging Ports: Total 5V/3.4A (17W) output. Features 3 USB-A ports (2.4A Max each) and 1 USB-C port (3A Max). Built-in smart technology detects devices for optimal charging speed.
- 6-Foot Heavy Duty Extension Cord: Rated for 1875W/15A, providing flexibility in placement.
- 2700 Joules Surge Protection: Protects connected electronics from voltage spikes and fluctuations.
- Overload Protection: An integrated 15A circuit breaker automatically cuts power to prevent damage from overloading.
- ETL Certified: Ensures compliance with safety standards.
- Fire-Resistant Shell: Constructed with a PC shell that is flame retardant up to 1382°F.
- Mounting Holes: Convenient keyhole slots on the back allow for wall or desk mounting.
Image 3.1: The surge protector powering various devices, highlighting the 12 AC outlets and 4 USB ports.
Image 3.2: Diagram showing the three-level complementary surge protection circuit (TVS, MOV, GDT) for enhanced device safety.
4. Setup
- Unpack: Carefully remove the surge protector from its packaging.
- Placement: Position the surge protector on a flat, stable surface or mount it to a wall/desk using the integrated keyhole slots. Ensure it is in a dry, indoor location away from direct sunlight, heat sources, and moisture.
- Connect to Power: Plug the surge protector's 6-foot power cord directly into a standard 3-prong, grounded 120V AC wall outlet. Do not plug it into another surge protector or extension cord.
- Verify Indicators: Once plugged in, the 'Protected' and 'Grounded' indicator lights on the unit should illuminate blue, confirming proper operation and protection.
- Connect Devices: Plug your electronic devices into the AC outlets and USB ports as needed. Utilize the widely spaced outlets for larger power adapters.
Image 4.1: The surge protector in a typical desk setup, showing its use with a monitor, tablet, and laptop.
5. Operating Instructions
- Power On/Off: Use the red ON/OFF switch located on the top of the unit to control power to all connected AC outlets and USB ports. Press 'ON' to supply power and 'OFF' to cut power.
- AC Outlets: Insert your device's power plugs into any of the 12 AC outlets. Ensure plugs are fully inserted.
- USB Charging Ports: Connect your USB-powered devices (smartphones, tablets, etc.) to the USB-A or USB-C ports. The smart charging technology will automatically detect your device and deliver the optimal charging current.
- Indicator Lights:
- Protected (Blue LED): Illuminates when the surge protection function is active. If this light goes out, the surge protection has been consumed, and the unit should be replaced to ensure continued protection.
- Grounded (Blue LED): Illuminates when the surge protector is properly connected to a grounded wall outlet. If this light is off, there may be a grounding issue with your wall outlet, and you should consult an electrician.
- Overload Protection Reset: If the surge protector is overloaded (exceeding 15A/1875W), the circuit breaker will trip, and the power will cut off. To restore power, unplug some devices, then press the 'Reset' button located near the power switch.
Image 5.1: Detail of the USB-A and USB-C ports, demonstrating their capability to charge multiple devices simultaneously.
6. Maintenance
- Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use and replace the unit.
- Cord Management: Use the included hook-and-loop cable tie to keep the extension cord neatly organized and prevent tangles.
7. Troubleshooting
- Q: The surge protector has no power.
- A: Check if the ON/OFF switch is in the 'ON' position. Ensure the power cord is securely plugged into a working wall outlet. If the 'Reset' button has popped out, press it to reset the overload protection after unplugging some devices.
- Q: The 'Protected' indicator light is off.
- A: This indicates that the surge protection components have absorbed a significant surge and are no longer providing protection. While the outlets may still provide power, the unit should be replaced to ensure your devices remain protected from future surges.
- Q: The 'Grounded' indicator light is off.
- A: This suggests a grounding issue with the wall outlet. The surge protector will still provide power, but without proper grounding, its surge protection capabilities may be compromised. Consult a qualified electrician to inspect your wall outlet.
- Q: USB ports are not charging devices.
- A: Ensure the surge protector is powered on. Check the USB cables for damage and ensure they are properly connected to both the surge protector and your device. Verify that your device is compatible with USB charging standards.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | PS951 |
| AC Outlets | 12 |
| USB-A Ports | 3 (2.4A Max per port) |
| USB-C Port | 1 (3A Max) |
| Total USB Output | 5V/3.4A (17W) |
| Surge Protection | 2700 Joules |
| Electrical Rating | 1875W / 15A |
| Voltage | 125 Volts |
| Cable Length | 6 Feet |
| Product Dimensions | 9.9 x 3.6 x 1.1 inches |
| Item Weight | 1.19 pounds |
| Color | Black |
| Certifications | ETL Listed |
Image 8.1: Dimensional overview of the surge protector and its cable management feature.
9. Warranty and Support
ALESTOR provides a worry-free 24-month warranty for this product, along with a 30-day return policy. For any questions, technical support, or warranty claims, please contact ALESTOR customer service. Our reliable customer service team will respond to your inquiries within 24 hours.
Contact Information: Please refer to the product packaging or the official ALESTOR website for the most current customer service contact details.